December 2018 - Infra - Ovirt List Archives

[CQ]: 96302, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 96302,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 96040,9 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 96040,9 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/96302/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/96040/9 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/12069/

6 years

1
0
0 / 0

[JIRA] (OVIRT-2630) [VDSM] Tests fail with "missing workspace /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on vm0038.workers-phx.ovirt.org"

by Nir Soffer (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2630?page=com.atlassian.jir... ] Nir Soffer commented on OVIRT-2630: ----------------------------------- On Fri, Dec 21, 2018 at 1:47 AM Nir Soffer <nsoffer(a)redhat.com> wrote: > Third time today: > > Error: > sh: /home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp > /durable-15072b7e/jenkins-result.txt.tmp: > No such file or directory > mv: cannot stat > '/home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp > /durable-15072b7e/jenkins-result.txt.tmp': > No such file or directory > missing workspace > /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on > vm0013.workers-phx.ovirt.org > > Build: > > https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... Adding devel - if you see this error please report here. On Thu, Dec 20, 2018 at 10:01 PM Nir Soffer <nsoffer(a)redhat.com> wrote: > > > > Two incidents on a different slaves today: > > > > Error: > > sh: /home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp > /durable-d993b7a2/jenkins-result.txt.tmp: > > No such file or directory > > mv: cannot stat > > '/home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp > /durable-d993b7a2/jenkins-result.txt.tmp': > > No such file or directory > > missing workspace > > /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on > > vm0088.workers-phx.ovirt.org > > > > Build: > > > https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... > > > > > > Error: > > sh: /home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp > /durable-edec94a0/jenkins-result.txt.tmp: > > No such file or directory > > mv: cannot stat > > '/home/jenkins/workspace/vdsm_standard-check-patch/vdsm@tmp > /durable-edec94a0/jenkins-result.txt.tmp': > > No such file or directory > > missing workspace > > /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on > > vm0013.workers-phx.ovirt.org > > > > Build: > > > https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... > > > > On Wed, Dec 19, 2018 at 4:36 PM Nir Soffer <nsoffer(a)redhat.com> wrote: > > > > > > I have seen this before, very strange failure. > > > > > > The job run normally and then abort when we start to run the tests. > The error > > > does not come from our tests. > > > > > > Error: > > > ../tests/run_tests_local.sh API_test.py alignmentscan_test.py > > > api_response_test.py bridge_test.py caps_test.py client_test.py > > > clientif_test.py cmdutils_test.py config_test.py cpu_profile_test.py > > > cpuinfo_test.py domcaps_test.py encoding_test.py exception_test.py > > > executor_test.py eventfd_test.py fallocate_test.py filecontrol_test.py > > > fuser_test.py glob_test.py gluster_cli_test.py > > > gluster_exception_test.py glusterTestData.py > > > gluster_thinstorage_test.py hooks_test.py hostdev_test.py > > > hoststats_test.py hugepages_test.py hwinfo_test.py jobs_test.py > > > jsonRpcClient_test.py jsonrpc_test.py loopback_test.py mkimage_test.py > > > modprobe.py moduleloader_test.py monkeypatch_test.py mom_test.py > > > mompolicy_test.py osinfo_test.py osutils_test.py passwords_test.py > > > permutation_test.py protocoldetector_test.py response_test.py > > > rngsources_test.py schedule_test.py schemavalidation_test.py > > > sigutils_test.py sparsify_test.py stompadapter_test.py > > > stompasyncclient_test.py stompasyncdispatcher_test.py stomp_test.py > > > sysprep_test.py taskset_test.py testlib_test.py tool_confmeta_test.py > > > tool_test.py throttledlog_test.py unicode_test.py utils_test.py > > > validate_test.py vdsmapi_test.py vdsmdumpchains_test.py verify.py > > > vmapi_test.py vmfakelib_test.py vmTestsData.py zombiereaper_test.py > > > network/*_test.py devices/parsing/complex_vm_test.py > > > common/cache_test.py common/cmdutils_test.py common/concurrent_test.py > > > common/contextlib_test.py common/fileutils_test.py > > > common/function_test.py common/hostutils_test.py > > > common/libvirtconnection_test.py common/logutils_test.py > > > common/network_test.py common/osutils_test.py common/proc_test.py > > > common/properties_test.py common/pthread_test.py common/time_test.py > > > common/validate_test.py > > > > > > missing workspace > > > /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on > > > vm0038.workers-phx.ovirt.org > > > > > > > > > Build: > > > > https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... > > [VDSM] Tests fail with "missing workspace /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on vm0038.workers-phx.ovirt.org" > --------------------------------------------------------------------------------------------------------------------------------- > > Key: OVIRT-2630 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2630 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Nir Soffer > Assignee: infra > > I have seen this before, very strange failure. > The job run normally and then abort when we start to run the tests. The error > does not come from our tests. > Error: > ../tests/run_tests_local.sh API_test.py alignmentscan_test.py > api_response_test.py bridge_test.py caps_test.py client_test.py > clientif_test.py cmdutils_test.py config_test.py cpu_profile_test.py > cpuinfo_test.py domcaps_test.py encoding_test.py exception_test.py > executor_test.py eventfd_test.py fallocate_test.py filecontrol_test.py > fuser_test.py glob_test.py gluster_cli_test.py > gluster_exception_test.py glusterTestData.py > gluster_thinstorage_test.py hooks_test.py hostdev_test.py > hoststats_test.py hugepages_test.py hwinfo_test.py jobs_test.py > jsonRpcClient_test.py jsonrpc_test.py loopback_test.py mkimage_test.py > modprobe.py moduleloader_test.py monkeypatch_test.py mom_test.py > mompolicy_test.py osinfo_test.py osutils_test.py passwords_test.py > permutation_test.py protocoldetector_test.py response_test.py > rngsources_test.py schedule_test.py schemavalidation_test.py > sigutils_test.py sparsify_test.py stompadapter_test.py > stompasyncclient_test.py stompasyncdispatcher_test.py stomp_test.py > sysprep_test.py taskset_test.py testlib_test.py tool_confmeta_test.py > tool_test.py throttledlog_test.py unicode_test.py utils_test.py > validate_test.py vdsmapi_test.py vdsmdumpchains_test.py verify.py > vmapi_test.py vmfakelib_test.py vmTestsData.py zombiereaper_test.py > network/*_test.py devices/parsing/complex_vm_test.py > common/cache_test.py common/cmdutils_test.py common/concurrent_test.py > common/contextlib_test.py common/fileutils_test.py > common/function_test.py common/hostutils_test.py > common/libvirtconnection_test.py common/logutils_test.py > common/network_test.py common/osutils_test.py common/proc_test.py > common/properties_test.py common/pthread_test.py common/time_test.py > common/validate_test.py > missing workspace > /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on > vm0038.workers-phx.ovirt.org > Build: > https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100097)

6 years

1
0
0 / 0

[JIRA] (OVIRT-2634) all ovirt projects failing due to 001_upgrade_engine.test_initialize_engine

by Dafna Ron (oVirt JIRA)

Dafna Ron created OVIRT-2634: -------------------------------- Summary: all ovirt projects failing due to 001_upgrade_engine.test_initialize_engine Key: OVIRT-2634 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2634 Project: oVirt - virtualization made easy Issue Type: Bug Reporter: Dafna Ron Assignee: infra Priority: Highest we fail on updating schema. http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/12052/ regression caused by https://gerrit.ovirt.org/#/c/96040/9 Fix introduced: https://gerrit.ovirt.org/#/c/96371/ We have a long queue of patches and fix is still in untested queue so it may take some time to pass -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100097)

6 years

1
0
0 / 0

[oVirt Jenkins] ovirt-appliance_master_build-artifacts-fc28-x86_64 - Build # 160 - Failure!

by jenkins＠jenkins.phx.ovirt.org

Project: http://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-fc28-... Build: http://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-fc28-... Build Number: 160 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #160 [Yuval Turgeman] build: change root fs to be a logical volume ----------------- Failed Tests: ----------------- No tests ran.

6 years

1
1
0 / 0

[oVirt Jenkins] ovirt-node-ng-image_4.3_build-artifacts-fc28-x86_64 - Build # 17 - Failure!

by jenkins＠jenkins.phx.ovirt.org

Project: http://jenkins.ovirt.org/job/ovirt-node-ng-image_4.3_build-artifacts-fc28... Build: http://jenkins.ovirt.org/job/ovirt-node-ng-image_4.3_build-artifacts-fc28... Build Number: 17 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #17 [Sandro Bonazzola] build: prepare for 4.3.0 alpha release [Marcin Sobczyk] vdsm: Disable CI v1 for VDSM's master branch ----------------- Failed Tests: ----------------- No tests ran.

6 years

1
15
0 / 0

[CQ]: 96040,9 (ovirt-engine) failed "ovirt-master" system tests

by oVirt Jenkins

Change 96040,9 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/96040/9 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/12052/

6 years

3
2
0 / 0

[oVirt Jenkins] ovirt-node-ng-image_master_build-artifacts-fc28-x86_64 - Build # 140 - Failure!

by jenkins＠jenkins.phx.ovirt.org

Project: http://jenkins.ovirt.org/job/ovirt-node-ng-image_master_build-artifacts-f... Build: http://jenkins.ovirt.org/job/ovirt-node-ng-image_master_build-artifacts-f... Build Number: 140 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #140 [Yuval Turgeman] build: add version and release.dist to iso name [Daniel Belenky] stdci_runner: support sriov-nic requirement [Marcin Sobczyk] vdsm: Disable CI v1 for VDSM's master branch ----------------- Failed Tests: ----------------- No tests ran.

6 years

1
16
0 / 0

[JIRA] (OVIRT-2633) Add posibility to remove changes from change queue before change, which actually fixes the issue

by Martin Perina (oVirt JIRA)

Martin Perina created OVIRT-2633: ------------------------------------ Summary: Add posibility to remove changes from change queue before change, which actually fixes the issue Key: OVIRT-2633 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2633 Project: oVirt - virtualization made easy Issue Type: New Feature Reporter: Martin Perina Assignee: infra Let's have a patch P1, which created an issue and failed verification in change queue. Until a fix is prepared and merged as P10, there were merged other patches P2 - P9. Because P10 is merged as last, it contains all previous changes. And because we already know that P2 - P9 will fail, there is no reason to verify those changes and there should be a way how to remove them from the change queue, so P10 can be verified as soon as possible. Otherwise we are wasting valuable recources. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100096)

6 years

1
0
0 / 0

[JIRA] (OVIRT-2630) [VDSM] Tests fail with "missing workspace /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on vm0038.workers-phx.ovirt.org"

by Dafna Ron (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2630?page=com.atlassian.jir... ] Dafna Ron commented on OVIRT-2630: ---------------------------------- Nir, this Jira is closed. can you please comment on for any updates on this issue? https://ovirt-jira.atlassian.net/browse/OVIRT-2587 > [VDSM] Tests fail with "missing workspace /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on vm0038.workers-phx.ovirt.org" > --------------------------------------------------------------------------------------------------------------------------------- > > Key: OVIRT-2630 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2630 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Nir Soffer > Assignee: infra > > I have seen this before, very strange failure. > The job run normally and then abort when we start to run the tests. The error > does not come from our tests. > Error: > ../tests/run_tests_local.sh API_test.py alignmentscan_test.py > api_response_test.py bridge_test.py caps_test.py client_test.py > clientif_test.py cmdutils_test.py config_test.py cpu_profile_test.py > cpuinfo_test.py domcaps_test.py encoding_test.py exception_test.py > executor_test.py eventfd_test.py fallocate_test.py filecontrol_test.py > fuser_test.py glob_test.py gluster_cli_test.py > gluster_exception_test.py glusterTestData.py > gluster_thinstorage_test.py hooks_test.py hostdev_test.py > hoststats_test.py hugepages_test.py hwinfo_test.py jobs_test.py > jsonRpcClient_test.py jsonrpc_test.py loopback_test.py mkimage_test.py > modprobe.py moduleloader_test.py monkeypatch_test.py mom_test.py > mompolicy_test.py osinfo_test.py osutils_test.py passwords_test.py > permutation_test.py protocoldetector_test.py response_test.py > rngsources_test.py schedule_test.py schemavalidation_test.py > sigutils_test.py sparsify_test.py stompadapter_test.py > stompasyncclient_test.py stompasyncdispatcher_test.py stomp_test.py > sysprep_test.py taskset_test.py testlib_test.py tool_confmeta_test.py > tool_test.py throttledlog_test.py unicode_test.py utils_test.py > validate_test.py vdsmapi_test.py vdsmdumpchains_test.py verify.py > vmapi_test.py vmfakelib_test.py vmTestsData.py zombiereaper_test.py > network/*_test.py devices/parsing/complex_vm_test.py > common/cache_test.py common/cmdutils_test.py common/concurrent_test.py > common/contextlib_test.py common/fileutils_test.py > common/function_test.py common/hostutils_test.py > common/libvirtconnection_test.py common/logutils_test.py > common/network_test.py common/osutils_test.py common/proc_test.py > common/properties_test.py common/pthread_test.py common/time_test.py > common/validate_test.py > missing workspace > /home/jenkins/workspace/vdsm_standard-check-patch/vdsm on > vm0038.workers-phx.ovirt.org > Build: > https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_... -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100096)

6 years

1
0
0 / 0

Build failed in Jenkins: system-sync_mirrors-centos-kvm-common-el7-x86_64 #2026

by jenkins＠jenkins.phx.ovirt.org

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-kvm-common-el7-x8...> ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-kvm-common-el7-x8...> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/changes/59/95959/1:test --prune > git rev-parse origin/test^{commit} # timeout=10 > git rev-parse test^{commit} # timeout=10 Checking out Revision 05b40dfb4ec43a82530e8c471395d1858e5c59e1 (test) > git config core.sparsecheckout # timeout=10 > git checkout -f 05b40dfb4ec43a82530e8c471395d1858e5c59e1 Commit message: "mirror-reposync: remove gluster-3.10 mirror" > git rev-list --no-walk 05b40dfb4ec43a82530e8c471395d1858e5c59e1 # timeout=10 [system-sync_mirrors-centos-kvm-common-el7-x86_64] $ /bin/bash -xe /tmp/jenkins2067132964519395940.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-kvm-common-el7 x86_64 jenkins/data/mirrors-reposync.conf Checking if mirror needs a resync Traceback (most recent call last): File "/usr/bin/reposync", line 343, in <module> main() File "/usr/bin/reposync", line 175, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1465, in _commonLoadRepoXML local = self.cachedir + '/repomd.xml' File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 774, in <lambda> cachedir = property(lambda self: self._dirGetAttr('cachedir')) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 757, in _dirGetAttr self.dirSetup() File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 735, in dirSetup self._dirSetupMkdir_p(dir) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 712, in _dirSetupMkdir_p raise Errors.RepoError, msg yum.Errors.RepoError: Error making cache directory: /home/jenkins/mirrors_cache/centos-kvm-common-el7 error was: [Errno 17] File exists: '/home/jenkins/mirrors_cache/centos-kvm-common-el7' Build step 'Execute shell' marked build as failure

6 years

1
1
0 / 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Infra December 2018