September 2018 - Infra - Ovirt List Archives

[CQ]: bec8839 (ovirt-ansible-engine-setup) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change bec8839 (ovirt-ansible-engine-setup) failed. However, this change seems not to be the root cause for this failure. Change e842386 (ovirt-ansible-engine-setup) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change e842386 (ovirt-ansible-engine- setup) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible-engine-setup/commit/bec88397c97566... For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible-engine-setup/commit/e8423862f86db4... For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/10371/

5 years, 9 months

1
0
0 / 0

[oVirt Jenkins] ovirt-system-tests_network-suite-master - Build # 585 - Failure!

by jenkins＠jenkins.phx.ovirt.org

Project: http://jenkins.ovirt.org/job/ovirt-system-tests_network-suite-master/ Build: http://jenkins.ovirt.org/job/ovirt-system-tests_network-suite-master/585/ Build Number: 585 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #585 [Milan Zamazal] Update test-vm.ovf file ----------------- Failed Tests: ----------------- 2 tests failed. FAILED: network-suite-master.tests.ovn-provider.test_ovn_provider.test_ovn_provider_create_scenario Error Message: AnsibleExecutionFailure Stack Trace: openstack_client_config = 'ovirt' def test_ovn_provider_create_scenario(openstack_client_config): > _test_ovn_provider('create_scenario.yml') network-suite-master/tests/ovn-provider/test_ovn_provider.py:49: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ network-suite-master/tests/ovn-provider/test_ovn_provider.py:167: in _test_ovn_provider playbook.run() network-suite-master/lib/ansiblelib.py:127: in run self._run_playbook_executor() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <lib.ansiblelib.Playbook object at 0x7f7977502510> def _run_playbook_executor(self): pbex = PlaybookExecutor(**self._pbex_args) if pbex.run() != 0: > raise AnsibleExecutionFailure E AnsibleExecutionFailure network-suite-master/lib/ansiblelib.py:140: AnsibleExecutionFailure FAILED: network-suite-master.tests.ovn-provider.test_ovn_provider.test_validate_ovn_provider_connectivity Error Message: PingFailed: Ssh command "ip netns exec net10_port1 ping -4 -c 1 -M do -s 56 10.11.0.11" exited with status code 1. Stderr: Stack Trace: default_ovn_provider_client = <shade.openstackcloud.OpenStackCloud object at 0x7f7976cc5310> host_0 = <lib.hostlib.Host object at 0x7f798404ac10> host_1 = <lib.hostlib.Host object at 0x7f798404a2d0> def test_validate_ovn_provider_connectivity(default_ovn_provider_client, host_0, host_1): net10_port1 = default_ovn_provider_client.get_port(NETWORK10_PORT1_NAME) net11_port1 = default_ovn_provider_client.get_port(NETWORK11_PORT1_NAME) net14_port1 = default_ovn_provider_client.get_port(NETWORK14_PORT1_NAME) net10_subnet1 = default_ovn_provider_client.get_subnet( NETWORK10_SUBNET1_NAME) net11_subnet1 = default_ovn_provider_client.get_subnet( NETWORK11_SUBNET1_NAME) net14_subnet1 = default_ovn_provider_client.get_subnet( NETWORK14_SUBNET1_NAME) connections = ( (host_0, net10_port1, net10_subnet1,), (host_1, net11_port1, net11_subnet1,), (host_1, net14_port1, net14_subnet1,) ) with _create_namespaces(connections): with _create_ovs_ports(connections): assert_connectivity_between(host=host_0, from_port=net10_port1, > to_port=net11_port1) network-suite-master/tests/ovn-provider/test_ovn_provider.py:73: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ network-suite-master/tests/ovn-provider/test_ovn_provider.py:96: in assert_connectivity_between _ping(host=host, from_port=from_port, to_port=to_port) network-suite-master/tests/ovn-provider/test_ovn_provider.py:109: in _ping netns=from_port.name) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ source = '192.168.201.3', password = '123456', destination = '10.11.0.11' data_size = 56, netns = 'net10_port1' def ssh_ping(source, password, destination, data_size=56, netns=None): """ Ping a given destination from source. :parameter source: the host which executes the ping command :parameter password: the root password for the host source :parameter destination: the destination of the ping command :parameter data_size: the size of the data payload :parameter netns: optional networking namespace in which to execute """ netns_prefix = 'ip netns exec {} '.format(netns) if netns else '' cmd = netns_prefix + 'ping -4 -c 1 -M do -s {} {}'.format( data_size, destination) try: sshlib.exec_command(source, password, cmd) except SshException as err: > raise PingFailed(err) E PingFailed: Ssh command "ip netns exec net10_port1 ping -4 -c 1 -M do -s 56 10.11.0.11" exited with status code 1. Stderr: network-suite-master/testlib/ping.py:45: PingFailed

5 years, 9 months

1
9
0 / 0

[JIRA] (OVIRT-2506) Accessing logs is sometimes extremely slow even without blueocean

by Barak Korren (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2506?page=com.atlassian.jir... ] Barak Korren commented on OVIRT-2506: ------------------------------------- Its still beeign server by jenkins, just not via any complex code; but if the whole JVM becomes slow because of GC issues, it can be slow too. In any case we've restarted Jenkins a few minutes ago, so everything aught to be faster now. > Accessing logs is sometimes extremely slow even without blueocean > ----------------------------------------------------------------- > > Key: OVIRT-2506 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2506 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Components: Jenkins Master > Reporter: Roman Mohr > Assignee: infra > > Hi, > With the switch from blueocean to the text-based build summary in > kubevirt/kubevirt, in general accessing works much better. Still > especially in the morning hours it can take a long time to access the > logs. > Can it be that the build summary and the logs are still served by > jenkins? If yes, would it help to copied out/cache/serve the build > logs via a dedicated webserver? > Best Regards, > Roman -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100092)

5 years, 9 months

1
0
0 / 0

[JIRA] (OVIRT-2506) Accessing logs is sometimes extremely slow even without blueocean

by Barak Korren (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2506?page=com.atlassian.jir... ] Barak Korren updated OVIRT-2506: -------------------------------- Component/s: Jenkins Master > Accessing logs is sometimes extremely slow even without blueocean > ----------------------------------------------------------------- > > Key: OVIRT-2506 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2506 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Components: Jenkins Master > Reporter: Roman Mohr > Assignee: infra > > Hi, > With the switch from blueocean to the text-based build summary in > kubevirt/kubevirt, in general accessing works much better. Still > especially in the morning hours it can take a long time to access the > logs. > Can it be that the build summary and the logs are still served by > jenkins? If yes, would it help to copied out/cache/serve the build > logs via a dedicated webserver? > Best Regards, > Roman -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100092)

5 years, 9 months

1
0
0 / 0

[JIRA] (OVIRT-2506) Accessing logs is sometimes extremely slow even without blueocean

by Roman Mohr (oVirt JIRA)

Roman Mohr created OVIRT-2506: --------------------------------- Summary: Accessing logs is sometimes extremely slow even without blueocean Key: OVIRT-2506 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2506 Project: oVirt - virtualization made easy Issue Type: By-EMAIL Reporter: Roman Mohr Assignee: infra Hi, With the switch from blueocean to the text-based build summary in kubevirt/kubevirt, in general accessing works much better. Still especially in the morning hours it can take a long time to access the logs. Can it be that the build summary and the logs are still served by jenkins? If yes, would it help to copied out/cache/serve the build logs via a dedicated webserver? Best Regards, Roman -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100092)

5 years, 9 months

1
0
0 / 0

[JIRA] (OVIRT-2505) ovirt github organization

by Ahmad Khiet (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2505?page=com.atlassian.jir... ] Ahmad Khiet commented on OVIRT-2505: ------------------------------------ Hi [~bkorren(a)redhat.com] ovirt-engine > ovirt github organization > ------------------------- > > Key: OVIRT-2505 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2505 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Ahmad Khiet > Assignee: infra > > Hi, > can you please add my github user to ovirt org > https://github.com/NaySoftware > Thanks, > Ahmad. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100092)

5 years, 9 months

1
0
0 / 0

[JIRA] (OVIRT-2505) ovirt github organization

by Barak Korren (oVirt JIRA)

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2505?page=com.atlassian.jir... ] Barak Korren commented on OVIRT-2505: ------------------------------------- Hi [~akhiet(a)redhat.com], which projects are you going to be working on? Please note that most of the oVirt sources are maintained in [gerrit.ovirt.org|https://gerrit.ovirt.org] and not GitHub. > ovirt github organization > ------------------------- > > Key: OVIRT-2505 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2505 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Ahmad Khiet > Assignee: infra > > Hi, > can you please add my github user to ovirt org > https://github.com/NaySoftware > Thanks, > Ahmad. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100092)

5 years, 9 months

1
0
0 / 0

[CQ]: 94266,4 (ovirt-engine) failed "ovirt-master" system tests

by oVirt Jenkins

Change 94266,4 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/94266/4 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/10367/

5 years, 9 months

2
1
0 / 0

[JIRA] (OVIRT-2505) ovirt github organization

by Ahmad Khiet (oVirt JIRA)

Ahmad Khiet created OVIRT-2505: ---------------------------------- Summary: ovirt github organization Key: OVIRT-2505 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2505 Project: oVirt - virtualization made easy Issue Type: By-EMAIL Reporter: Ahmad Khiet Assignee: infra Hi, can you please add my github user to ovirt org https://github.com/NaySoftware Thanks, Ahmad. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100092)

5 years, 9 months

1
0
0 / 0

Build failed in Jenkins: system-sync_mirrors-epel-el6-x86_64 #1881

by jenkins＠jenkins.phx.ovirt.org

See <http://jenkins.ovirt.org/job/system-sync_mirrors-epel-el6-x86_64/1881/dis...> ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-epel-el6-x86_64/ws/> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision f9508e32027645ea57bcfec09dafe628fbb06677 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f f9508e32027645ea57bcfec09dafe628fbb06677 Commit message: "standard_pipelines: add nmstate project" > git rev-list --no-walk f9508e32027645ea57bcfec09dafe628fbb06677 # timeout=10 [system-sync_mirrors-epel-el6-x86_64] $ /bin/bash -xe /tmp/jenkins3983678000755324930.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror epel-el6 x86_64 jenkins/data/mirrors-reposync.conf Checking if mirror needs a resync Traceback (most recent call last): File "/usr/bin/reposync", line 343, in <module> main() File "/usr/bin/reposync", line 209, in main my.doSackSetup(arches) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 741, in doSackSetup return self._getSacks(archlist=archlist, thisrepo=thisrepo) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 778, in _getSacks self.repos.populateSack(which=repos) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 386, in populateSack sack.populate(repo, mdtype, callback, cacheonly) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 256, in populate ret = misc.repo_gen_decompress(xml, gen, cached=repo.cache) File "/usr/lib/python2.7/site-packages/yum/misc.py", line 1165, in repo_gen_decompress return decompress(filename, dest=dest, check_timestamps=True) File "/usr/lib/python2.7/site-packages/yum/misc.py", line 1150, in decompress _decompress_chunked(filename, out, ztype) File "/usr/lib/python2.7/site-packages/yum/misc.py", line 791, in _decompress_chunked raise Errors.MiscError, msg yum.Errors.MiscError: Error reading from file /home/jenkins/mirrors_cache/epel-el6/b4d4d39ae211c497fd1d621791a9b1757c2509be7347291886b9d35d6e1a61ff-primary.xml.gz: Not a gzipped file Build step 'Execute shell' marked build as failure

5 years, 9 months

1
1
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Infra September 2018