November 2019 - Infra - Ovirt List Archives

[CQ]: 104027, 10 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 104027,10 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 103437,35 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103437,35 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/104027/10 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103437/35 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17471/

4 years, 4 months

1
0
0 / 0

[oVirt Jenkins] ovirt-system-tests_compat-4.3-suite-master - Build # 270 - Failure!

by jenkins＠jenkins.phx.ovirt.org

Project: http://jenkins.ovirt.org/job/ovirt-system-tests_compat-4.3-suite-master/ Build: http://jenkins.ovirt.org/job/ovirt-system-tests_compat-4.3-suite-master/270/ Build Number: 270 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #270 [Galit Rosenthal] Copied master suite sdk4:add_quota_storage_limits [Sandro Bonazzola] change-queues: add ovirt-4.4 queue ----------------- Failed Tests: ----------------- 1 tests failed. FAILED: 098_ovirt_provider_ovn.use_ovn_provider_43 Error Message: Fault reason is "Operation Failed". Fault detail is "[Cannot add a Network Interface when VM is not Down, Up or Image-Locked.]". HTTP response code is 409. -------------------- >> begin captured logging << -------------------- requests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:35357 py.warnings: WARNING: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.io/en/latest/advanced-usage.html#ssl-warnings requests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:35357 "POST /v2.0/tokens/ HTTP/1.1" 200 None requests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696 requests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/networks/ HTTP/1.1" 200 None requests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696 requests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/ports/ HTTP/1.1" 200 None requests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696 requests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/subnets/ HTTP/1.1" 200 None requests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696 requests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "POST /v2.0/networks/ HTTP/1.1" 201 None requests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696 requests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "POST /v2.0/subnets/ HTTP/1.1" 201 None requests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696 requests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "POST /v2.0/ports/ HTTP/1.1" 201 None requests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696 requests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/networks/ HTTP/1.1" 200 None requests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696 requests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/ports/ HTTP/1.1" 200 None requests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696 requests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/subnets/ HTTP/1.1" 200 None --------------------- >> end captured logging << --------------------- Stack Trace: File "/usr/lib64/python2.7/unittest/case.py", line 369, in run testMethod() File "/usr/lib/python2.7/site-packages/nose/case.py", line 197, in runTest self.test(*self.arg) File "/usr/lib/python2.7/site-packages/ovirtlago/testlib.py", line 142, in wrapped_test test() File "/usr/lib/python2.7/site-packages/ovirtlago/testlib.py", line 60, in wrapper return func(get_test_prefix(), *args, **kwargs) File "/usr/lib/python2.7/site-packages/ovirtlago/testlib.py", line 79, in wrapper prefix.virt_env.engine_vm().get_api(api_ver=4), *args, **kwargs File "/usr/lib/python2.7/site-packages/ovirtlago/testlib.py", line 60, in wrapper return func(get_test_prefix(), *args, **kwargs) File "/home/jenkins/agent/workspace/ovirt-system-tests_compat-4.3-suite-master/ovirt-system-tests/compat-4.3-suite-master/test-scenarios/098_ovirt_provider_ovn.py", line 464, in use_ovn_provider _hotplug_network_to_vm(api, VM0_NAME, NETWORK_1, IFACE_NAME) File "/home/jenkins/agent/workspace/ovirt-system-tests_compat-4.3-suite-master/ovirt-system-tests/compat-4.3-suite-master/test-scenarios/098_ovirt_provider_ovn.py", line 404, in _hotplug_network_to_vm id=profile.id, File "/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py", line 34352, in add return self._internal_add(nic, headers, query, wait) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 232, in _internal_add return future.wait() if wait else future File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 55, in wait return self._code(response) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 229, in callback self._check_fault(response) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 132, in _check_fault self._raise_error(response, body) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 118, in _raise_error raise error 'Fault reason is "Operation Failed". Fault detail is "[Cannot add a Network Interface when VM is not Down, Up or Image-Locked.]". HTTP response code is 409.\n-------------------- >> begin captured logging << --------------------\nrequests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:35357\npy.warnings: WARNING: Unverified HTTPS request is being made. Adding certificate verification is strongly advised. See: https://urllib3.readthedocs.io/en/latest/advanced-usage.html#ssl-warnings...: DEBUG: https://192.168.201.4:35357 "POST /v2.0/tokens/ HTTP/1.1" 200 None\nrequests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696\nrequests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/networks/ HTTP/1.1" 200 None\nrequests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696\nrequests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/ports/ HTTP/1.1" 200 None\nrequests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696\nrequests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/subnets/ HTTP/1.1" 200 None\nrequests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696\nrequests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "POST /v2.0/networks/ HTTP/1.1" 201 None\nrequests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696\nrequests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "POST /v2.0/subnets/ HTTP/1.1" 201 None\nrequests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696\nrequests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "POST /v2.0/ports/ HTTP/1.1" 201 None\nrequests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696\nrequests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/networks/ HTTP/1.1" 200 None\nrequests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696\nrequests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/ports/ HTTP/1.1" 200 None\nrequests.packages.urllib3.connectionpool: DEBUG: Starting new HTTPS connection (1): 192.168.201.4:9696\nrequests.packages.urllib3.connectionpool: DEBUG: https://192.168.201.4:9696 "GET /v2.0/subnets/ HTTP/1.1" 200 None\n--------------------- >> end captured logging << ---------------------'

4 years, 4 months

1
1
0 / 0

[JENKINS] Failed to setup proejct vdsm_standard-check-patch

by jenkins＠jenkins.phx.ovirt.org

Failed to run project_setup.sh for: #15100 vdsm [check-patch]. It probably means that docker_cleanup.py failed. This step doesn't fail the job, but we do collect data about such failures to find the root cause. Infra owner, ensure that we're not running out of disk space on vm0009.workers-phx.ovirt.org.

4 years, 4 months

1
0
0 / 0

[CQ]: 105029, 9 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 105029,9 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 103437,35 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103437,35 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/105029/9 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103437/35 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17466/

4 years, 4 months

1
0
0 / 0

[oVirt Jenkins] deploy-to-gated-ovirt-master - Build #53 - FAILURE!

by jenkins＠jenkins.phx.ovirt.org

Build: http://jenkins.ovirt.org/job/deploy-to-gated-ovirt-master/53/ Build Name: #53 Build Status: FAILURE Gerrit change: null - title: null - project: null - branch: null - author: null <null>

4 years, 4 months

1
1
0 / 0

[CQ]: 105128,3 (vdsm) failed "ovirt-master" system tests

by oVirt Jenkins

Change 105128,3 (vdsm) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/105128/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17461/

4 years, 4 months

1
0
0 / 0

[CQ]: 104717, 31 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 104717,31 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 103437,35 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103437,35 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/104717/31 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103437/35 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17456/

4 years, 4 months

1
0
0 / 0

[CQ]: 104708, 28 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 104708,28 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 103437,35 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103437,35 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/104708/28 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103437/35 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17451/

4 years, 4 months

1
0
0 / 0

[JENKINS] Failed to setup proejct oVirt_ovirt-web-ui_standard-check-pr

by jenkins＠jenkins.phx.ovirt.org

Failed to run project_setup.sh for: #1087 ovirt-web-ui [check-patch]. It probably means that docker_cleanup.py failed. This step doesn't fail the job, but we do collect data about such failures to find the root cause. Infra owner, ensure that we're not running out of disk space on vm0009.workers-phx.ovirt.org.

4 years, 4 months

1
0
0 / 0

[CQ]: 104325, 45 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause

by oVirt Jenkins

A system test invoked by the "ovirt-master" change queue including change 104325,45 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 103437,35 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 103437,35 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/104325/45 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/103437/35 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17445/

4 years, 4 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Infra November 2019