December 2019 - Infra - oVirt List Archives

[CQ]: 105168, 15 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 04 Dec '19

04 Dec '19

A system test invoked by the "ovirt-master" change queue including change 105168,15 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 104569,2 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104569,2 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/105168/15 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104569/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17582/

1 0

[CQ]: 105322, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 04 Dec '19

04 Dec '19

A system test invoked by the "ovirt-master" change queue including change 105322,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 104569,2 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104569,2 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/105322/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104569/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17580/

1 0

[CQ]: 104569,2 (ovirt-engine) failed "ovirt-master" system tests
by oVirt Jenkins 04 Dec '19

04 Dec '19

Change 104569,2 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/104569/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17578/

1 0

[CQ]: 105351,2 (cockpit-ovirt) failed "ovirt-4.3" system tests
by oVirt Jenkins 04 Dec '19

04 Dec '19

Change 105351,2 (cockpit-ovirt) is probably the reason behind recent system test failures in the "ovirt-4.3" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/105351/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/2617/

1 0

[CQ]: 105042,12 (ovirt-engine) failed "ovirt-master" system tests
by oVirt Jenkins 04 Dec '19

04 Dec '19

Change 105042,12 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/105042/12 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17573/

1 0

[JENKINS] Failed to setup proejct vdsm_standard-check-patch
by jenkins＠jenkins.phx.ovirt.org 04 Dec '19

04 Dec '19

Failed to run project_setup.sh for: #15423 vdsm [check-patch]. It probably means that docker_cleanup.py failed. This step doesn't fail the job, but we do collect data about such failures to find the root cause. Infra owner, ensure that we're not running out of disk space on vm0009.workers-phx.ovirt.org.

1 0

[JENKINS] Failed to setup proejct vdsm_standard-check-patch
by jenkins＠jenkins.phx.ovirt.org 04 Dec '19

04 Dec '19

Failed to run project_setup.sh for: #15413 vdsm [check-patch]. It probably means that docker_cleanup.py failed. This step doesn't fail the job, but we do collect data about such failures to find the root cause. Infra owner, ensure that we're not running out of disk space on vm0009.workers-phx.ovirt.org.

1 0

oVirt infra daily report - unstable production jobs - 1028
by jenkins＠jenkins.phx.ovirt.org 04 Dec '19

04 Dec '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/1028//artifact/exported-… Cheers, Jenkins

1 0

[CQ]: 105319,2 (ovirt-engine) failed "ovirt-master" system tests
by oVirt Jenkins 03 Dec '19

03 Dec '19

Change 105319,2 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/105319/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17568/

1 0

Build failed in Jenkins: system-sync_mirrors-fedora-base-fc29-x86_64 #1177
by jenkins＠jenkins.phx.ovirt.org 03 Dec '19

03 Dec '19

See <http://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc29-x86_64/11…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc29-x86_64/ws/> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 6cbb066d15a4751af995329e75d0c99f19fa049c (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 6cbb066d15a4751af995329e75d0c99f19fa049c Commit message: "usrc: disable pusher functionality if it was not imported" > git rev-list --no-walk 6cbb066d15a4751af995329e75d0c99f19fa049c # timeout=10 [system-sync_mirrors-fedora-base-fc29-x86_64] $ /bin/bash -xe /tmp/jenkins2349188754050532118.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=fedora-base-fc29 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs fedora-base-fc29 yum + local repo_name=fedora-base-fc29 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/fedora-base-fc29 /var/www/html/repos/yum/fedora-base-fc29/base + check_yum_sync_needed fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=fedora-base-fc29 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/fedora-base-fc29 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=fedora-base-fc29 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=fedora-base-fc29 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/fedora-base-fc29/base --norepopath --newest-only --urls --quiet Error setting up repositories: Cannot retrieve metalink for repository: fedora-base-fc29. Please verify its path and try again + reposync_out= Build step 'Execute shell' marked build as failure

1 1