June 2019 - Infra - Ovirt List Archives

[CQ]: 8dd62a4 (v2v-conversion-host) failed "ovirt-master" system tests

by oVirt Jenkins

Change 8dd62a4 (v2v-conversion-host) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://github.com/oVirt/v2v-conversion-host/commit/8dd62a4ba67acf89e10b0... For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/14610/

4 years, 11 months

1
0
0 / 0

[CQ]: 8dd62a4 (v2v-conversion-host) failed "ovirt-4.2" system tests

by oVirt Jenkins

Change 8dd62a4 (v2v-conversion-host) is probably the reason behind recent system test failures in the "ovirt-4.2" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://github.com/oVirt/v2v-conversion-host/commit/8dd62a4ba67acf89e10b0... For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.2_change-queue-tester/4518/

4 years, 11 months

1
0
0 / 0

[CQ]: 100883, 1 (ovirt-hosted-engine-setup) failed "ovirt-master" system tests

by oVirt Jenkins

Change 100883,1 (ovirt-hosted-engine-setup) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/100883/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/14602/

4 years, 11 months

1
0
0 / 0

oVirt infra daily report - unstable production jobs - 859

by jenkins＠jenkins.phx.ovirt.org

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/859//artifact/exported... Cheers, Jenkins

4 years, 11 months

1
0
0 / 0

[CQ]: 100863,1 (ovirt-appliance) failed "ovirt-4.3" system tests

by oVirt Jenkins

Change 100863,1 (ovirt-appliance) is probably the reason behind recent system test failures in the "ovirt-4.3" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/100863/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/1205/

4 years, 11 months

2
1
0 / 0

[CQ]: 100865, 1 (ovirt-engine-metrics) failed "ovirt-master" system tests

by oVirt Jenkins

Change 100865,1 (ovirt-engine-metrics) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/100865/1 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/14594/

4 years, 11 months

1
0
0 / 0

Build failed in Jenkins: system-sync_mirrors-fedora-base-fc29-x86_64 #669

by jenkins＠jenkins.phx.ovirt.org

See <http://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc29-x86_64/...> ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc29-x86_64/ws/> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision cd8d0429acbb673eddfb07cf0637feee9c0126bc (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f cd8d0429acbb673eddfb07cf0637feee9c0126bc Commit message: "updating fedora 29 slaves to june 2019" > git rev-list --no-walk cd8d0429acbb673eddfb07cf0637feee9c0126bc # timeout=10 [system-sync_mirrors-fedora-base-fc29-x86_64] $ /bin/bash -xe /tmp/jenkins9119494798664399467.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=fedora-base-fc29 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs fedora-base-fc29 yum + local repo_name=fedora-base-fc29 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/fedora-base-fc29 /var/www/html/repos/yum/fedora-base-fc29/base + check_yum_sync_needed fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=fedora-base-fc29 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/fedora-base-fc29 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=fedora-base-fc29 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=fedora-base-fc29 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/fedora-base-fc29/base --norepopath --newest-only --urls --quiet Traceback (most recent call last): File "/usr/bin/reposync", line 373, in <module> main() File "/usr/bin/reposync", line 185, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1482, in _commonLoadRepoXML result = self._getFileRepoXML(local, text) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1259, in _getFileRepoXML size=102400) # setting max size as 100K File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1025, in _getFile result = self.grab.urlgrab(misc.to_utf8(relative), local, File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 703, in <lambda> grab = property(lambda self: self._getgrab()) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 698, in _getgrab self._setupGrab() File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 635, in _setupGrab urls = self.urls File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 881, in <lambda> urls = property(fget=lambda self: self._geturls(), File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 878, in _geturls self._baseurlSetup() File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 824, in _baseurlSetup mirrorurls.extend(list(self.metalink_data.urls())) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 921, in <lambda> metalink_data = property(fget=lambda self: self._getMetalink(), File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 917, in _getMetalink self._metalink = metalink.MetaLinkRepoMD(self.metalink_filename) File "/usr/lib/python2.7/site-packages/yum/metalink.py", line 189, in __init__ raise MetaLinkRepoErrorParseFail, "File %s is not XML" % filename yum.metalink.MetaLinkRepoErrorParseFail: File /home/jenkins/mirrors_cache/fedora-base-fc29/metalink.xml is not XML + reposync_out='Could not get metalink https://mirrors.fedoraproject.org/metalink?repo=fedora-29&arch=x86_64 error was 16: error opening file from https://mirrors.fedoraproject.org/metalink?repo=fedora-29&arch=x86_64, IOError: [Errno 2] No such file or directory: '\''/home/jenkins/mirrors_cache/fedora-base-fc29/metalink.xml.tmp'\''' Build step 'Execute shell' marked build as failure

4 years, 11 months

1
1
0 / 0

oVirt infra daily report - unstable production jobs - 858

by jenkins＠jenkins.phx.ovirt.org

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/858//artifact/exported... Cheers, Jenkins

4 years, 11 months

1
0
0 / 0

oVirt infra daily report - unstable production jobs - 857

by jenkins＠jenkins.phx.ovirt.org

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/857//artifact/exported... Cheers, Jenkins

4 years, 11 months

1
0
0 / 0

oVirt infra daily report - unstable production jobs - 856

by jenkins＠jenkins.phx.ovirt.org

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/856//artifact/exported... Cheers, Jenkins

4 years, 11 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Infra June 2019