December 2020 - Infra - oVirt List Archives

[oVirt Jenkins] ovirt-system-tests_performance-suite-master - Build # 1650 - Failure!
by jenkins＠jenkins.phx.ovirt.org 10 Dec '20

10 Dec '20

Project: https://jenkins.ovirt.org/job/ovirt-system-tests_performance-suite-master/ Build: https://jenkins.ovirt.org/job/ovirt-system-tests_performance-suite-master/1… Build Number: 1650 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #1650 [hbraha] network: remove engine.ssh from fixtures/storage ----------------- Failed Tests: ----------------- No tests ran.

1 19

[oVirt Jenkins] ovirt-system-tests_basic-suite-master_nightly - Build # 650 - Failure!
by jenkins＠jenkins.phx.ovirt.org 10 Dec '20

10 Dec '20

Project: https://jenkins.ovirt.org/job/ovirt-system-tests_basic-suite-master_nightly/ Build: https://jenkins.ovirt.org/job/ovirt-system-tests_basic-suite-master_nightly… Build Number: 650 Build Status: Failure Triggered By: Started by user Galit Rosenthal ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #650 [Eitan Raviv] network: host de/activate - add retry ----------------- Failed Tests: ----------------- No tests ran.

1 13

[CQ]: 112581, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 10 Dec '20

10 Dec '20

A system test invoked by the "ovirt-master" change queue including change 112581,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 112126,10 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 112126,10 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/c/ovirt-engine/+/#/c/112581/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/c/ovirt-engine/+/#/c/112126/10 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/27288/

1 0

[CQ]: 112126,10 (ovirt-engine) failed "ovirt-master" system tests
by oVirt Jenkins 10 Dec '20

10 Dec '20

Change 112126,10 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/c/ovirt-engine/+/#/c/112126/10 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/27286/

1 0

oVirt infra daily report - unstable production jobs - 1400
by jenkins＠jenkins.phx.ovirt.org 10 Dec '20

10 Dec '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1400//artifact/exported… Cheers, Jenkins

1 0

[oVirt Jenkins] ovirt-system-tests_basic-suite-4.3_nightly - Build # 6 - Failure!
by jenkins＠jenkins.phx.ovirt.org 09 Dec '20

09 Dec '20

Project: https://jenkins.ovirt.org/job/ovirt-system-tests_basic-suite-4.3_nightly/ Build: https://jenkins.ovirt.org/job/ovirt-system-tests_basic-suite-4.3_nightly/6/ Build Number: 6 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #6 [parthdhanjal] WIP: hc-4.3 fix ----------------- Failed Tests: ----------------- 1 tests failed. FAILED: 004_basic_sanity.run_vms Error Message: Fault reason is "Operation Failed". Fault detail is "[Network error during communication with the Host.]". HTTP response code is 400. Stack Trace: Traceback (most recent call last): File "/usr/lib64/python2.7/unittest/case.py", line 369, in run testMethod() File "/usr/lib/python2.7/site-packages/nose/case.py", line 197, in runTest self.test(*self.arg) File "/usr/lib/python2.7/site-packages/ovirtlago/testlib.py", line 142, in wrapped_test test() File "/usr/lib/python2.7/site-packages/ovirtlago/testlib.py", line 60, in wrapper return func(get_test_prefix(), *args, **kwargs) File "/home/jenkins/agent/workspace/ovirt-system-tests_basic-suite-4.3_nightly/ovirt-system-tests/basic-suite-4.3/test-scenarios/004_basic_sanity.py", line 694, in run_vms vm0_service.start(use_cloud_init=True, vm=vm_params) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py", line 32520, in start return self._internal_action(action, 'start', None, headers, query, wait) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 299, in _internal_action return future.wait() if wait else future File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 55, in wait return self._code(response) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 296, in callback self._check_fault(response) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 134, in _check_fault self._raise_error(response, body.fault) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 118, in _raise_error raise error Error: Fault reason is "Operation Failed". Fault detail is "[Network error during communication with the Host.]". HTTP response code is 400.

1 1

oVirt infra daily report - unstable production jobs - 1399
by jenkins＠jenkins.phx.ovirt.org 09 Dec '20

09 Dec '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1399//artifact/exported… Cheers, Jenkins

1 0

Whitelist request from a Red Hat newcomer
by Romain Arnaud 08 Dec '20

08 Dec '20

Hi, I'm a new member of the Product CI/CD team. A draft has been blocked because I'm not a member of the whitelist (see https://gerrit.ovirt.org/c/jenkins/+/112561, patch set 3). Could you please add me to the whitelist and let me know how to retrigger the build? Thanks, -- Romain Arnaud He/Him/His Senior Software Engineer, Continuous Productization, Product CI/CD Red Hat <https://www.redhat.com/> <https://www.redhat.com/>

3 2

[JIRA] (OVIRT-3072) To add Romain Arnaud to the jenkins-whitelist
by Krapali Rai (oVirt JIRA) 08 Dec '20

08 Dec '20

Krapali Rai created OVIRT-3072: ---------------------------------- Summary: To add Romain Arnaud to the jenkins-whitelist Key: OVIRT-3072 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-3072 Project: oVirt - virtualization made easy Issue Type: Task Reporter: Krapali Rai Assignee: infra Hi, I'm a new member of the Product CI/CD team. A draft has been blocked because I'm not a member of the whitelist (see https://gerrit.ovirt.org/c/jenkins/+/112561, patch set 3). Could you please add me to the whitelist and let me know how to retrigger the build? Thanks, -- Romain Arnaud He/Him/His Senior Software Engineer, Continuous Productization, Product CI/CD Red Hat -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100152)

1 0

[JIRA] (OVIRT-3071) CI OST: hardware acceleration not available, kvm executable not found
by Ehud Yonasi (oVirt JIRA) 08 Dec '20

08 Dec '20

[ https://ovirt-jira.atlassian.net/browse/OVIRT-3071?page=com.atlassian.jira.… ] Ehud Yonasi commented on OVIRT-3071: ------------------------------------ Hey Didi, We are trying to build the ost-images for centos 8.3. > CI OST: hardware acceleration not available, kvm executable not found > --------------------------------------------------------------------- > > Key: OVIRT-3071 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-3071 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Yedidyah Bar David > Assignee: Ehud Yonasi > > Hi all, > Recent runs fail with $subject, e.g.: > https://jenkins.ovirt.org/job/ovirt-system-tests_standard-check-patch/14269… > 08:40:07 Package > qemu-kvm-15:4.2.0-34.module_el8.3.0+555+a55c8938.x86_64 is already > installed. > 08:45:03 hardware acceleration not available > 08:45:03 emulator not found b'<capabilities>\n\n <host>\n > <uuid>4c4c4544-0038-4410-8039-b7c04f333832</uuid>\n <cpu>\n > <arch>x86_64</arch>\n <model>Haswell-noTSX-IBRS</model>\n > <vendor>Intel</vendor>\n <microcode version="67"/>\n > <counter name="tsc" frequency="2397222000" scaling="no"/>\n > <topology sockets="1" dies="1" cores="8" threads="2"/>\n <feature > name="vme"/>\n <feature name="ds"/>\n <feature > name="acpi"/>\n <feature name="ss"/>\n <feature > name="ht"/>\n <feature name="tm"/>\n <feature name="pbe"/>\n > <feature name="dtes64"/>\n <feature name="monitor"/>\n > <feature name="ds_cpl"/>\n <feature name="vmx"/>\n <feature > name="smx"/>\n <feature name="est"/>\n <feature > name="tm2"/>\n <feature name="xtpr"/>\n <feature > name="pdcm"/>\n <feature name="dca"/>\n <feature > name="osxsave"/>\n <feature name="f16c"/>\n <feature > name="rdrand"/>\n <feature name="arat"/>\n <feature > name="tsc_adjust"/>\n <feature name="cmt"/>\n <feature > name="md-clear"/>\n <feature name="stibp"/>\n <feature > name="ssbd"/>\n <feature name="xsaveopt"/>\n <feature > name="pdpe1gb"/>\n <feature name="abm"/>\n <feature > name="invtsc"/>\n <pages unit="KiB" size="4"/>\n <pages > unit="KiB" size="2048"/>\n <pages unit="KiB" size="1048576"/>\n > </cpu>\n <power_management>\n <suspend_mem/>\n > <suspend_disk/>\n <suspend_hybrid/>\n </power_management>\n > <iommu support="no"/>\n <migration_features>\n <live/>\n > <uri_transports>\n <uri_transport>tcp</uri_transport>\n > <uri_transport>rdma</uri_transport>\n </uri_transports>\n > </migration_features>\n <topology>\n <cells num="1">\n > <cell id="0">\n <memory unit="KiB">115148964</memory>\n > <pages unit="KiB" size="4">28787241</pages>\n <pages > unit="KiB" size="2048">0</pages>\n <pages unit="KiB" > size="1048576">0</pages>\n <distances>\n <sibling > id="0" value="10"/>\n </distances>\n <cpus > num="16">\n <cpu id="0" socket_id="0" die_id="0" > core_id="0" siblings="0,8"/>\n <cpu id="1" socket_id="0" > die_id="0" core_id="1" siblings="1,9"/>\n <cpu id="2" > socket_id="0" die_id="0" core_id="2" siblings="2,10"/>\n > <cpu id="3" socket_id="0" die_id="0" core_id="3" siblings="3,11"/>\n > <cpu id="4" socket_id="0" die_id="0" core_id="4" > siblings="4,12"/>\n <cpu id="5" socket_id="0" die_id="0" > core_id="5" siblings="5,13"/>\n <cpu id="6" socket_id="0" > die_id="0" core_id="6" siblings="6,14"/>\n <cpu id="7" > socket_id="0" die_id="0" core_id="7" siblings="7,15"/>\n > <cpu id="8" socket_id="0" die_id="0" core_id="0" siblings="0,8"/>\n > <cpu id="9" socket_id="0" die_id="0" core_id="1" > siblings="1,9"/>\n <cpu id="10" socket_id="0" die_id="0" > core_id="2" siblings="2,10"/>\n <cpu id="11" socket_id="0" > die_id="0" core_id="3" siblings="3,11"/>\n <cpu id="12" > socket_id="0" die_id="0" core_id="4" siblings="4,12"/>\n > <cpu id="13" socket_id="0" die_id="0" core_id="5" siblings="5,13"/>\n > <cpu id="14" socket_id="0" die_id="0" core_id="6" > siblings="6,14"/>\n <cpu id="15" socket_id="0" die_id="0" > core_id="7" siblings="7,15"/>\n </cpus>\n </cell>\n > </cells>\n </topology>\n <cache>\n <bank id="0" level="3" > type="both" size="20" unit="MiB" cpus="0-15"/>\n </cache>\n > <secmodel>\n <model>selinux</model>\n <doi>0</doi>\n > <baselabel type="kvm">system_u:system_r:svirt_t:s0</baselabel>\n > <baselabel type="qemu">system_u:system_r:svirt_tcg_t:s0</baselabel>\n > </secmodel>\n <secmodel>\n <model>dac</model>\n > <doi>0</doi>\n <baselabel type="kvm">+107:+107</baselabel>\n > <baselabel type="qemu">+107:+107</baselabel>\n </secmodel>\n > </host>\n\n</capabilities>' > As you can see, above does not include any '<guest>' sections. > Searching for relevant keywords I can find: > https://bugzilla.redhat.com/show_bug.cgi?id=1066630 > So perhaps some dependency of qemu is not installed, or not updated? > Thanks and best regards, > -- > Didi -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100152)

1 0

[JIRA] (OVIRT-3071) CI OST: hardware acceleration not available, kvm executable not found
by Ehud Yonasi (oVirt JIRA) 08 Dec '20

08 Dec '20

[ https://ovirt-jira.atlassian.net/browse/OVIRT-3071?page=com.atlassian.jira.… ] Ehud Yonasi updated OVIRT-3071: ------------------------------- Assignee: (was: ) Status: In Progress (was: To Do) > CI OST: hardware acceleration not available, kvm executable not found > --------------------------------------------------------------------- > > Key: OVIRT-3071 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-3071 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Yedidyah Bar David > Assignee: Ehud Yonasi > > Hi all, > Recent runs fail with $subject, e.g.: > https://jenkins.ovirt.org/job/ovirt-system-tests_standard-check-patch/14269… > 08:40:07 Package > qemu-kvm-15:4.2.0-34.module_el8.3.0+555+a55c8938.x86_64 is already > installed. > 08:45:03 hardware acceleration not available > 08:45:03 emulator not found b'<capabilities>\n\n <host>\n > <uuid>4c4c4544-0038-4410-8039-b7c04f333832</uuid>\n <cpu>\n > <arch>x86_64</arch>\n <model>Haswell-noTSX-IBRS</model>\n > <vendor>Intel</vendor>\n <microcode version="67"/>\n > <counter name="tsc" frequency="2397222000" scaling="no"/>\n > <topology sockets="1" dies="1" cores="8" threads="2"/>\n <feature > name="vme"/>\n <feature name="ds"/>\n <feature > name="acpi"/>\n <feature name="ss"/>\n <feature > name="ht"/>\n <feature name="tm"/>\n <feature name="pbe"/>\n > <feature name="dtes64"/>\n <feature name="monitor"/>\n > <feature name="ds_cpl"/>\n <feature name="vmx"/>\n <feature > name="smx"/>\n <feature name="est"/>\n <feature > name="tm2"/>\n <feature name="xtpr"/>\n <feature > name="pdcm"/>\n <feature name="dca"/>\n <feature > name="osxsave"/>\n <feature name="f16c"/>\n <feature > name="rdrand"/>\n <feature name="arat"/>\n <feature > name="tsc_adjust"/>\n <feature name="cmt"/>\n <feature > name="md-clear"/>\n <feature name="stibp"/>\n <feature > name="ssbd"/>\n <feature name="xsaveopt"/>\n <feature > name="pdpe1gb"/>\n <feature name="abm"/>\n <feature > name="invtsc"/>\n <pages unit="KiB" size="4"/>\n <pages > unit="KiB" size="2048"/>\n <pages unit="KiB" size="1048576"/>\n > </cpu>\n <power_management>\n <suspend_mem/>\n > <suspend_disk/>\n <suspend_hybrid/>\n </power_management>\n > <iommu support="no"/>\n <migration_features>\n <live/>\n > <uri_transports>\n <uri_transport>tcp</uri_transport>\n > <uri_transport>rdma</uri_transport>\n </uri_transports>\n > </migration_features>\n <topology>\n <cells num="1">\n > <cell id="0">\n <memory unit="KiB">115148964</memory>\n > <pages unit="KiB" size="4">28787241</pages>\n <pages > unit="KiB" size="2048">0</pages>\n <pages unit="KiB" > size="1048576">0</pages>\n <distances>\n <sibling > id="0" value="10"/>\n </distances>\n <cpus > num="16">\n <cpu id="0" socket_id="0" die_id="0" > core_id="0" siblings="0,8"/>\n <cpu id="1" socket_id="0" > die_id="0" core_id="1" siblings="1,9"/>\n <cpu id="2" > socket_id="0" die_id="0" core_id="2" siblings="2,10"/>\n > <cpu id="3" socket_id="0" die_id="0" core_id="3" siblings="3,11"/>\n > <cpu id="4" socket_id="0" die_id="0" core_id="4" > siblings="4,12"/>\n <cpu id="5" socket_id="0" die_id="0" > core_id="5" siblings="5,13"/>\n <cpu id="6" socket_id="0" > die_id="0" core_id="6" siblings="6,14"/>\n <cpu id="7" > socket_id="0" die_id="0" core_id="7" siblings="7,15"/>\n > <cpu id="8" socket_id="0" die_id="0" core_id="0" siblings="0,8"/>\n > <cpu id="9" socket_id="0" die_id="0" core_id="1" > siblings="1,9"/>\n <cpu id="10" socket_id="0" die_id="0" > core_id="2" siblings="2,10"/>\n <cpu id="11" socket_id="0" > die_id="0" core_id="3" siblings="3,11"/>\n <cpu id="12" > socket_id="0" die_id="0" core_id="4" siblings="4,12"/>\n > <cpu id="13" socket_id="0" die_id="0" core_id="5" siblings="5,13"/>\n > <cpu id="14" socket_id="0" die_id="0" core_id="6" > siblings="6,14"/>\n <cpu id="15" socket_id="0" die_id="0" > core_id="7" siblings="7,15"/>\n </cpus>\n </cell>\n > </cells>\n </topology>\n <cache>\n <bank id="0" level="3" > type="both" size="20" unit="MiB" cpus="0-15"/>\n </cache>\n > <secmodel>\n <model>selinux</model>\n <doi>0</doi>\n > <baselabel type="kvm">system_u:system_r:svirt_t:s0</baselabel>\n > <baselabel type="qemu">system_u:system_r:svirt_tcg_t:s0</baselabel>\n > </secmodel>\n <secmodel>\n <model>dac</model>\n > <doi>0</doi>\n <baselabel type="kvm">+107:+107</baselabel>\n > <baselabel type="qemu">+107:+107</baselabel>\n </secmodel>\n > </host>\n\n</capabilities>' > As you can see, above does not include any '<guest>' sections. > Searching for relevant keywords I can find: > https://bugzilla.redhat.com/show_bug.cgi?id=1066630 > So perhaps some dependency of qemu is not installed, or not updated? > Thanks and best regards, > -- > Didi -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100152)

1 0

[JIRA] (OVIRT-3071) CI OST: hardware acceleration not available, kvm executable not found
by Galit Rosenthal (oVirt JIRA) 08 Dec '20

08 Dec '20

[ https://ovirt-jira.atlassian.net/browse/OVIRT-3071?page=com.atlassian.jira.… ] Galit Rosenthal commented on OVIRT-3071: ---------------------------------------- HI, This issue is being handled. Once it will be solved will let you know > CI OST: hardware acceleration not available, kvm executable not found > --------------------------------------------------------------------- > > Key: OVIRT-3071 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-3071 > Project: oVirt - virtualization made easy > Issue Type: By-EMAIL > Reporter: Yedidyah Bar David > Assignee: infra > > Hi all, > Recent runs fail with $subject, e.g.: > https://jenkins.ovirt.org/job/ovirt-system-tests_standard-check-patch/14269… > 08:40:07 Package > qemu-kvm-15:4.2.0-34.module_el8.3.0+555+a55c8938.x86_64 is already > installed. > 08:45:03 hardware acceleration not available > 08:45:03 emulator not found b'<capabilities>\n\n <host>\n > <uuid>4c4c4544-0038-4410-8039-b7c04f333832</uuid>\n <cpu>\n > <arch>x86_64</arch>\n <model>Haswell-noTSX-IBRS</model>\n > <vendor>Intel</vendor>\n <microcode version="67"/>\n > <counter name="tsc" frequency="2397222000" scaling="no"/>\n > <topology sockets="1" dies="1" cores="8" threads="2"/>\n <feature > name="vme"/>\n <feature name="ds"/>\n <feature > name="acpi"/>\n <feature name="ss"/>\n <feature > name="ht"/>\n <feature name="tm"/>\n <feature name="pbe"/>\n > <feature name="dtes64"/>\n <feature name="monitor"/>\n > <feature name="ds_cpl"/>\n <feature name="vmx"/>\n <feature > name="smx"/>\n <feature name="est"/>\n <feature > name="tm2"/>\n <feature name="xtpr"/>\n <feature > name="pdcm"/>\n <feature name="dca"/>\n <feature > name="osxsave"/>\n <feature name="f16c"/>\n <feature > name="rdrand"/>\n <feature name="arat"/>\n <feature > name="tsc_adjust"/>\n <feature name="cmt"/>\n <feature > name="md-clear"/>\n <feature name="stibp"/>\n <feature > name="ssbd"/>\n <feature name="xsaveopt"/>\n <feature > name="pdpe1gb"/>\n <feature name="abm"/>\n <feature > name="invtsc"/>\n <pages unit="KiB" size="4"/>\n <pages > unit="KiB" size="2048"/>\n <pages unit="KiB" size="1048576"/>\n > </cpu>\n <power_management>\n <suspend_mem/>\n > <suspend_disk/>\n <suspend_hybrid/>\n </power_management>\n > <iommu support="no"/>\n <migration_features>\n <live/>\n > <uri_transports>\n <uri_transport>tcp</uri_transport>\n > <uri_transport>rdma</uri_transport>\n </uri_transports>\n > </migration_features>\n <topology>\n <cells num="1">\n > <cell id="0">\n <memory unit="KiB">115148964</memory>\n > <pages unit="KiB" size="4">28787241</pages>\n <pages > unit="KiB" size="2048">0</pages>\n <pages unit="KiB" > size="1048576">0</pages>\n <distances>\n <sibling > id="0" value="10"/>\n </distances>\n <cpus > num="16">\n <cpu id="0" socket_id="0" die_id="0" > core_id="0" siblings="0,8"/>\n <cpu id="1" socket_id="0" > die_id="0" core_id="1" siblings="1,9"/>\n <cpu id="2" > socket_id="0" die_id="0" core_id="2" siblings="2,10"/>\n > <cpu id="3" socket_id="0" die_id="0" core_id="3" siblings="3,11"/>\n > <cpu id="4" socket_id="0" die_id="0" core_id="4" > siblings="4,12"/>\n <cpu id="5" socket_id="0" die_id="0" > core_id="5" siblings="5,13"/>\n <cpu id="6" socket_id="0" > die_id="0" core_id="6" siblings="6,14"/>\n <cpu id="7" > socket_id="0" die_id="0" core_id="7" siblings="7,15"/>\n > <cpu id="8" socket_id="0" die_id="0" core_id="0" siblings="0,8"/>\n > <cpu id="9" socket_id="0" die_id="0" core_id="1" > siblings="1,9"/>\n <cpu id="10" socket_id="0" die_id="0" > core_id="2" siblings="2,10"/>\n <cpu id="11" socket_id="0" > die_id="0" core_id="3" siblings="3,11"/>\n <cpu id="12" > socket_id="0" die_id="0" core_id="4" siblings="4,12"/>\n > <cpu id="13" socket_id="0" die_id="0" core_id="5" siblings="5,13"/>\n > <cpu id="14" socket_id="0" die_id="0" core_id="6" > siblings="6,14"/>\n <cpu id="15" socket_id="0" die_id="0" > core_id="7" siblings="7,15"/>\n </cpus>\n </cell>\n > </cells>\n </topology>\n <cache>\n <bank id="0" level="3" > type="both" size="20" unit="MiB" cpus="0-15"/>\n </cache>\n > <secmodel>\n <model>selinux</model>\n <doi>0</doi>\n > <baselabel type="kvm">system_u:system_r:svirt_t:s0</baselabel>\n > <baselabel type="qemu">system_u:system_r:svirt_tcg_t:s0</baselabel>\n > </secmodel>\n <secmodel>\n <model>dac</model>\n > <doi>0</doi>\n <baselabel type="kvm">+107:+107</baselabel>\n > <baselabel type="qemu">+107:+107</baselabel>\n </secmodel>\n > </host>\n\n</capabilities>' > As you can see, above does not include any '<guest>' sections. > Searching for relevant keywords I can find: > https://bugzilla.redhat.com/show_bug.cgi?id=1066630 > So perhaps some dependency of qemu is not installed, or not updated? > Thanks and best regards, > -- > Didi -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100152)

1 0

[JIRA] (OVIRT-3071) CI OST: hardware acceleration not available, kvm executable not found
by Yedidyah Bar David (oVirt JIRA) 08 Dec '20

08 Dec '20

Yedidyah Bar David created OVIRT-3071: ----------------------------------------- Summary: CI OST: hardware acceleration not available, kvm executable not found Key: OVIRT-3071 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-3071 Project: oVirt - virtualization made easy Issue Type: By-EMAIL Reporter: Yedidyah Bar David Assignee: infra Hi all, Recent runs fail with $subject, e.g.: https://jenkins.ovirt.org/job/ovirt-system-tests_standard-check-patch/14269… 08:40:07 Package qemu-kvm-15:4.2.0-34.module_el8.3.0+555+a55c8938.x86_64 is already installed. 08:45:03 hardware acceleration not available 08:45:03 emulator not found b'<capabilities>\n\n <host>\n <uuid>4c4c4544-0038-4410-8039-b7c04f333832</uuid>\n <cpu>\n <arch>x86_64</arch>\n <model>Haswell-noTSX-IBRS</model>\n <vendor>Intel</vendor>\n <microcode version="67"/>\n <counter name="tsc" frequency="2397222000" scaling="no"/>\n <topology sockets="1" dies="1" cores="8" threads="2"/>\n <feature name="vme"/>\n <feature name="ds"/>\n <feature name="acpi"/>\n <feature name="ss"/>\n <feature name="ht"/>\n <feature name="tm"/>\n <feature name="pbe"/>\n <feature name="dtes64"/>\n <feature name="monitor"/>\n <feature name="ds_cpl"/>\n <feature name="vmx"/>\n <feature name="smx"/>\n <feature name="est"/>\n <feature name="tm2"/>\n <feature name="xtpr"/>\n <feature name="pdcm"/>\n <feature name="dca"/>\n <feature name="osxsave"/>\n <feature name="f16c"/>\n <feature name="rdrand"/>\n <feature name="arat"/>\n <feature name="tsc_adjust"/>\n <feature name="cmt"/>\n <feature name="md-clear"/>\n <feature name="stibp"/>\n <feature name="ssbd"/>\n <feature name="xsaveopt"/>\n <feature name="pdpe1gb"/>\n <feature name="abm"/>\n <feature name="invtsc"/>\n <pages unit="KiB" size="4"/>\n <pages unit="KiB" size="2048"/>\n <pages unit="KiB" size="1048576"/>\n </cpu>\n <power_management>\n <suspend_mem/>\n <suspend_disk/>\n <suspend_hybrid/>\n </power_management>\n <iommu support="no"/>\n <migration_features>\n <live/>\n <uri_transports>\n <uri_transport>tcp</uri_transport>\n <uri_transport>rdma</uri_transport>\n </uri_transports>\n </migration_features>\n <topology>\n <cells num="1">\n <cell id="0">\n <memory unit="KiB">115148964</memory>\n <pages unit="KiB" size="4">28787241</pages>\n <pages unit="KiB" size="2048">0</pages>\n <pages unit="KiB" size="1048576">0</pages>\n <distances>\n <sibling id="0" value="10"/>\n </distances>\n <cpus num="16">\n <cpu id="0" socket_id="0" die_id="0" core_id="0" siblings="0,8"/>\n <cpu id="1" socket_id="0" die_id="0" core_id="1" siblings="1,9"/>\n <cpu id="2" socket_id="0" die_id="0" core_id="2" siblings="2,10"/>\n <cpu id="3" socket_id="0" die_id="0" core_id="3" siblings="3,11"/>\n <cpu id="4" socket_id="0" die_id="0" core_id="4" siblings="4,12"/>\n <cpu id="5" socket_id="0" die_id="0" core_id="5" siblings="5,13"/>\n <cpu id="6" socket_id="0" die_id="0" core_id="6" siblings="6,14"/>\n <cpu id="7" socket_id="0" die_id="0" core_id="7" siblings="7,15"/>\n <cpu id="8" socket_id="0" die_id="0" core_id="0" siblings="0,8"/>\n <cpu id="9" socket_id="0" die_id="0" core_id="1" siblings="1,9"/>\n <cpu id="10" socket_id="0" die_id="0" core_id="2" siblings="2,10"/>\n <cpu id="11" socket_id="0" die_id="0" core_id="3" siblings="3,11"/>\n <cpu id="12" socket_id="0" die_id="0" core_id="4" siblings="4,12"/>\n <cpu id="13" socket_id="0" die_id="0" core_id="5" siblings="5,13"/>\n <cpu id="14" socket_id="0" die_id="0" core_id="6" siblings="6,14"/>\n <cpu id="15" socket_id="0" die_id="0" core_id="7" siblings="7,15"/>\n </cpus>\n </cell>\n </cells>\n </topology>\n <cache>\n <bank id="0" level="3" type="both" size="20" unit="MiB" cpus="0-15"/>\n </cache>\n <secmodel>\n <model>selinux</model>\n <doi>0</doi>\n <baselabel type="kvm">system_u:system_r:svirt_t:s0</baselabel>\n <baselabel type="qemu">system_u:system_r:svirt_tcg_t:s0</baselabel>\n </secmodel>\n <secmodel>\n <model>dac</model>\n <doi>0</doi>\n <baselabel type="kvm">+107:+107</baselabel>\n <baselabel type="qemu">+107:+107</baselabel>\n </secmodel>\n </host>\n\n</capabilities>' As you can see, above does not include any '<guest>' sections. Searching for relevant keywords I can find: https://bugzilla.redhat.com/show_bug.cgi?id=1066630 So perhaps some dependency of qemu is not installed, or not updated? Thanks and best regards, -- Didi -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100152)

2 1

CI OST: hardware acceleration not available, kvm executable not found
by Yedidyah Bar David 08 Dec '20

08 Dec '20

Hi all, Recent runs fail with $subject, e.g.: https://jenkins.ovirt.org/job/ovirt-system-tests_standard-check-patch/14269… 08:40:07 Package qemu-kvm-15:4.2.0-34.module_el8.3.0+555+a55c8938.x86_64 is already installed. 08:45:03 hardware acceleration not available 08:45:03 emulator not found b'<capabilities>\n\n <host>\n <uuid>4c4c4544-0038-4410-8039-b7c04f333832</uuid>\n <cpu>\n <arch>x86_64</arch>\n <model>Haswell-noTSX-IBRS</model>\n <vendor>Intel</vendor>\n <microcode version="67"/>\n <counter name="tsc" frequency="2397222000" scaling="no"/>\n <topology sockets="1" dies="1" cores="8" threads="2"/>\n <feature name="vme"/>\n <feature name="ds"/>\n <feature name="acpi"/>\n <feature name="ss"/>\n <feature name="ht"/>\n <feature name="tm"/>\n <feature name="pbe"/>\n <feature name="dtes64"/>\n <feature name="monitor"/>\n <feature name="ds_cpl"/>\n <feature name="vmx"/>\n <feature name="smx"/>\n <feature name="est"/>\n <feature name="tm2"/>\n <feature name="xtpr"/>\n <feature name="pdcm"/>\n <feature name="dca"/>\n <feature name="osxsave"/>\n <feature name="f16c"/>\n <feature name="rdrand"/>\n <feature name="arat"/>\n <feature name="tsc_adjust"/>\n <feature name="cmt"/>\n <feature name="md-clear"/>\n <feature name="stibp"/>\n <feature name="ssbd"/>\n <feature name="xsaveopt"/>\n <feature name="pdpe1gb"/>\n <feature name="abm"/>\n <feature name="invtsc"/>\n <pages unit="KiB" size="4"/>\n <pages unit="KiB" size="2048"/>\n <pages unit="KiB" size="1048576"/>\n </cpu>\n <power_management>\n <suspend_mem/>\n <suspend_disk/>\n <suspend_hybrid/>\n </power_management>\n <iommu support="no"/>\n <migration_features>\n <live/>\n <uri_transports>\n <uri_transport>tcp</uri_transport>\n <uri_transport>rdma</uri_transport>\n </uri_transports>\n </migration_features>\n <topology>\n <cells num="1">\n <cell id="0">\n <memory unit="KiB">115148964</memory>\n <pages unit="KiB" size="4">28787241</pages>\n <pages unit="KiB" size="2048">0</pages>\n <pages unit="KiB" size="1048576">0</pages>\n <distances>\n <sibling id="0" value="10"/>\n </distances>\n <cpus num="16">\n <cpu id="0" socket_id="0" die_id="0" core_id="0" siblings="0,8"/>\n <cpu id="1" socket_id="0" die_id="0" core_id="1" siblings="1,9"/>\n <cpu id="2" socket_id="0" die_id="0" core_id="2" siblings="2,10"/>\n <cpu id="3" socket_id="0" die_id="0" core_id="3" siblings="3,11"/>\n <cpu id="4" socket_id="0" die_id="0" core_id="4" siblings="4,12"/>\n <cpu id="5" socket_id="0" die_id="0" core_id="5" siblings="5,13"/>\n <cpu id="6" socket_id="0" die_id="0" core_id="6" siblings="6,14"/>\n <cpu id="7" socket_id="0" die_id="0" core_id="7" siblings="7,15"/>\n <cpu id="8" socket_id="0" die_id="0" core_id="0" siblings="0,8"/>\n <cpu id="9" socket_id="0" die_id="0" core_id="1" siblings="1,9"/>\n <cpu id="10" socket_id="0" die_id="0" core_id="2" siblings="2,10"/>\n <cpu id="11" socket_id="0" die_id="0" core_id="3" siblings="3,11"/>\n <cpu id="12" socket_id="0" die_id="0" core_id="4" siblings="4,12"/>\n <cpu id="13" socket_id="0" die_id="0" core_id="5" siblings="5,13"/>\n <cpu id="14" socket_id="0" die_id="0" core_id="6" siblings="6,14"/>\n <cpu id="15" socket_id="0" die_id="0" core_id="7" siblings="7,15"/>\n </cpus>\n </cell>\n </cells>\n </topology>\n <cache>\n <bank id="0" level="3" type="both" size="20" unit="MiB" cpus="0-15"/>\n </cache>\n <secmodel>\n <model>selinux</model>\n <doi>0</doi>\n <baselabel type="kvm">system_u:system_r:svirt_t:s0</baselabel>\n <baselabel type="qemu">system_u:system_r:svirt_tcg_t:s0</baselabel>\n </secmodel>\n <secmodel>\n <model>dac</model>\n <doi>0</doi>\n <baselabel type="kvm">+107:+107</baselabel>\n <baselabel type="qemu">+107:+107</baselabel>\n </secmodel>\n </host>\n\n</capabilities>' As you can see, above does not include any '<guest>' sections. Searching for relevant keywords I can find: https://bugzilla.redhat.com/show_bug.cgi?id=1066630 So perhaps some dependency of qemu is not installed, or not updated? Thanks and best regards, -- Didi

1 0

[oVirt Jenkins] ovirt-system-tests_basic-suite-4.3_nightly - Build # 1 - Failure!
by jenkins＠jenkins.phx.ovirt.org 08 Dec '20

08 Dec '20

Project: https://jenkins.ovirt.org/job/ovirt-system-tests_basic-suite-4.3_nightly/ Build: https://jenkins.ovirt.org/job/ovirt-system-tests_basic-suite-4.3_nightly/1/ Build Number: 1 Build Status: Failure Triggered By: Started by user Galit Rosenthal ------------------------------------- Changes Since Last Success: ------------------------------------- ----------------- Failed Tests: ----------------- 1 tests failed. FAILED: 004_basic_sanity.run_vms Error Message: Fault reason is "Operation Failed". Fault detail is "[Network error during communication with the Host.]". HTTP response code is 400. Stack Trace: Traceback (most recent call last): File "/usr/lib64/python2.7/unittest/case.py", line 369, in run testMethod() File "/usr/lib/python2.7/site-packages/nose/case.py", line 197, in runTest self.test(*self.arg) File "/usr/lib/python2.7/site-packages/ovirtlago/testlib.py", line 142, in wrapped_test test() File "/usr/lib/python2.7/site-packages/ovirtlago/testlib.py", line 60, in wrapper return func(get_test_prefix(), *args, **kwargs) File "/home/jenkins/agent/workspace/ovirt-system-tests_basic-suite-4.3_nightly/ovirt-system-tests/basic-suite-4.3/test-scenarios/004_basic_sanity.py", line 694, in run_vms vm0_service.start(use_cloud_init=True, vm=vm_params) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py", line 32520, in start return self._internal_action(action, 'start', None, headers, query, wait) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 299, in _internal_action return future.wait() if wait else future File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 55, in wait return self._code(response) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 296, in callback self._check_fault(response) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 134, in _check_fault self._raise_error(response, body.fault) File "/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py", line 118, in _raise_error raise error Error: Fault reason is "Operation Failed". Fault detail is "[Network error during communication with the Host.]". HTTP response code is 400.

1 2

oVirt infra daily report - unstable production jobs - 1398
by jenkins＠jenkins.phx.ovirt.org 08 Dec '20

08 Dec '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1398//artifact/exported… Cheers, Jenkins

1 0

[JIRA] (OVIRT-3070) global_setup.sh fail: "docker.service: Failed at step EXEC spawning /usr/bin/dockerd-current: Permission denied"
by Nir Soffer (oVirt JIRA) 07 Dec '20

07 Dec '20

Nir Soffer created OVIRT-3070: --------------------------------- Summary: global_setup.sh fail: "docker.service: Failed at step EXEC spawning /usr/bin/dockerd-current: Permission denied" Key: OVIRT-3070 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-3070 Project: oVirt - virtualization made easy Issue Type: By-EMAIL Reporter: Nir Soffer Assignee: infra Seems that all builds fail now because the global setup script fails to setup the slave. Some examples: - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25522/ - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25520/ - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25519/ - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25516/ - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25515/ - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25514/ - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25513/ - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25511/ - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25510/ - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25509/ - https://jenkins.ovirt.org/job/vdsm_standard-check-patch/25508/ Log from the failed step: https://jenkins.ovirt.org/blue/rest/organizations/jenkins/pipelines/vdsm_st… [2020-12-07T18:09:18.284Z] Dec 07 15:11:08 vm0148.workers-phx.ovirt.org dockerd-current[1342]: time="2020-12-07T15:11:08.426348650Z" level=warning msg="d10f349413a9ce2b5f6cb33d7d721d133b323aba1bf00021ce4d714059b00813 cleanup: failed to unmount secrets: invalid argument" [2020-12-07T18:09:18.284Z] Dec 07 15:11:39 vm0148.workers-phx.ovirt.org dockerd-current[1342]: time="2020-12-07T15:11:39.112783512Z" level=warning msg="55ff0f77d37781237a199a8ba86bc544932f10b1018a3e614bd967b8b5956fd5 cleanup: failed to unmount secrets: invalid argument" [2020-12-07T18:09:18.284Z] Dec 07 15:11:40 vm0148.workers-phx.ovirt.org dockerd-current[1342]: time="2020-12-07T15:11:40.654819711Z" level=info msg="Layer sha256:9d23de0c6d4682039041ca8bb2825278a71c411a22799aeb7b47739514a731d0 cleaned up" [2020-12-07T18:09:18.284Z] Dec 07 15:11:41 vm0148.workers-phx.ovirt.org dockerd-current[1342]: time="2020-12-07T15:11:41.290807003Z" level=info msg="Layer sha256:9d23de0c6d4682039041ca8bb2825278a71c411a22799aeb7b47739514a731d0 cleaned up" [2020-12-07T18:09:18.284Z] Dec 07 15:11:45 vm0148.workers-phx.ovirt.org systemd[1]: docker.service: Main process exited, code=exited, status=2/INVALIDARGUMENT [2020-12-07T18:09:18.284Z] -- Subject: Unit process exited [2020-12-07T18:09:18.284Z] -- Defined-By: systemd [2020-12-07T18:09:18.284Z] -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel [2020-12-07T18:09:18.284Z] -- [2020-12-07T18:09:18.284Z] -- An ExecStart= process belonging to unit docker.service has exited. [2020-12-07T18:09:18.284Z] -- [2020-12-07T18:09:18.284Z] -- The process' exit code is 'exited' and its exit status is 2. [2020-12-07T18:09:18.284Z] Dec 07 15:11:45 vm0148.workers-phx.ovirt.org systemd[1]: docker.service: Failed with result 'exit-code'. [2020-12-07T18:09:18.284Z] -- Subject: Unit failed [2020-12-07T18:09:18.284Z] -- Defined-By: systemd [2020-12-07T18:09:18.284Z] -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel [2020-12-07T18:09:18.284Z] -- [2020-12-07T18:09:18.284Z] -- The unit docker.service has entered the 'failed' state with result 'exit-code'. [2020-12-07T18:09:18.284Z] Dec 07 15:12:30 vm0148.workers-phx.ovirt.org systemd[1]: Starting Docker Application Container Engine... [2020-12-07T18:09:18.284Z] -- Subject: A start job for unit docker.service has begun execution [2020-12-07T18:09:18.284Z] -- Defined-By: systemd [2020-12-07T18:09:18.284Z] -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel [2020-12-07T18:09:18.284Z] -- [2020-12-07T18:09:18.284Z] -- A start job for unit docker.service has begun execution. [2020-12-07T18:09:18.284Z] -- [2020-12-07T18:09:18.284Z] -- The job identifier is 109048. [2020-12-07T18:09:18.284Z] Dec 07 15:12:30 vm0148.workers-phx.ovirt.org systemd[4524]: docker.service: Failed to execute command: Permission denied [2020-12-07T18:09:18.284Z] Dec 07 15:12:30 vm0148.workers-phx.ovirt.org systemd[4524]: docker.service: Failed at step EXEC spawning /usr/bin/dockerd-current: Permission denied [2020-12-07T18:09:18.284Z] -- Subject: Process /usr/bin/dockerd-current could not be executed [2020-12-07T18:09:18.284Z] -- Defined-By: systemd [2020-12-07T18:09:18.284Z] -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel [2020-12-07T18:09:18.284Z] -- [2020-12-07T18:09:18.284Z] -- The process /usr/bin/dockerd-current could not be executed and failed. [2020-12-07T18:09:18.284Z] -- [2020-12-07T18:09:18.284Z] -- The error number returned by this process is ERRNO. [2020-12-07T18:09:18.284Z] Dec 07 15:12:30 vm0148.workers-phx.ovirt.org systemd[1]: docker.service: Main process exited, code=exited, status=203/EXEC [2020-12-07T18:09:18.284Z] -- Subject: Unit process exited [2020-12-07T18:09:18.284Z] -- Defined-By: systemd [2020-12-07T18:09:18.284Z] -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel [2020-12-07T18:09:18.284Z] -- [2020-12-07T18:09:18.284Z] -- An ExecStart= process belonging to unit docker.service has exited. [2020-12-07T18:09:18.284Z] -- [2020-12-07T18:09:18.284Z] -- The process' exit code is 'exited' and its exit status is 203. ... -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100152)

1 0

oVirt infra daily report - unstable production jobs - 1397
by jenkins＠jenkins.phx.ovirt.org 07 Dec '20

07 Dec '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1397//artifact/exported… Cheers, Jenkins

1 0

Build failed in Jenkins: system-sync_mirrors-centos-base-el8-x86_64 #748
by jenkins＠jenkins.phx.ovirt.org 06 Dec '20

06 Dec '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-base-el8-x86_64/74…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-base-el8-x86_64/ws/> The recommended git tool is: NONE No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git --version # 'git version 1.8.3.1' > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* # timeout=10 > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision c650869facb1d226cc55556ab4b6d388fe9f915c (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f c650869facb1d226cc55556ab4b6d388fe9f915c # timeout=10 Commit message: "stdci.yaml: drop ost-containers from CI." > git rev-list --no-walk c650869facb1d226cc55556ab4b6d388fe9f915c # timeout=10 [Checks API] No suitable checks publisher found. [system-sync_mirrors-centos-base-el8-x86_64] $ /bin/bash -xe /tmp/jenkins2234067930935613789.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-base-el8 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + YUM_PATH=/yum/ + MIRRORS_BASE_PREFIX=/var/www/html/repos/yum/ + REPOQUERY_HTTP_BASE=http://mirrors.phx.ovirt.org/repos/yum/ + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + MAX_AGE=14 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-base-el8 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-base-el8 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-base-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-base-el8 yum + local repo_name=centos-base-el8 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-base-el8 /var/www/html/repos/yum/centos-base-el8/base + modify_reposync_conf centos-base-el8 jenkins/data/mirrors-reposync.conf + local repo_name=centos-base-el8 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local tmp_file=reposync.tmp + awk -v RS= -v 'ORS=\n\n' /main/ jenkins/data/mirrors-reposync.conf + awk -v RS= -v 'ORS=\n\n' /centos-base-el8/ jenkins/data/mirrors-reposync.conf + mv reposync.tmp jenkins/data/mirrors-reposync.conf + check_yum_sync_needed centos-base-el8 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-base-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-base-el8 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-base-el8 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-base-el8 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-base-el8 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-base-el8/base --norepopath --urls --quiet Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=8&arch=x86_64&repo=BaseOS error was 14: curl#56 - "Recv failure: Connection reset by peer" Error setting up repositories: Cannot find a valid baseurl for repo: centos-base-el8 + reposync_out= Build step 'Execute shell' marked build as failure

1 1

[oVirt Jenkins] ovirt-system-tests_basic-suite-master_nightly - Build # 643 - Failure!
by jenkins＠jenkins.phx.ovirt.org 06 Dec '20

06 Dec '20

Project: https://jenkins.ovirt.org/job/ovirt-system-tests_basic-suite-master_nightly/ Build: https://jenkins.ovirt.org/job/ovirt-system-tests_basic-suite-master_nightly… Build Number: 643 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #643 [Liran Rotenberg] basic_sanity: check snapshot in clone test ----------------- Failed Tests: ----------------- 1 tests failed. FAILED: basic-suite-master.test-scenarios.test_004_basic_sanity.test_run_vms Error Message: Error: Fault reason is "Operation Failed". Fault detail is "[Network error during communication with the Host.]". HTTP response code is 400. Stack Trace: assert_vm_is_alive = <function is_alive at 0x7f07cc4776e0> engine_api = <ovirtsdk4.Connection object at 0x7f07cc47d950> management_gw_ip = '192.168.201.1' @order_by(_TEST_LIST) def test_run_vms(assert_vm_is_alive, engine_api, management_gw_ip): engine = engine_api.system_service() vm_params = types.Vm( initialization=types.Initialization( user_name=VM_USER_NAME, root_password=VM_PASSWORD ) ) vm_params.initialization.host_name = BACKUP_VM_NAME backup_vm_service = test_utils.get_vm_service(engine, BACKUP_VM_NAME) backup_vm_service.start(use_cloud_init=True, vm=vm_params) vm_params.initialization.host_name = VM2_NAME vm2_service = test_utils.get_vm_service(engine, VM2_NAME) vm2_service.start(use_cloud_init=True, vm=vm_params) # CirrOS cloud-init is different, networking doesn't work since it doesn't support the format oVirt is using vm_params.initialization.host_name = VM0_NAME # hostname seems to work, the others not vm_params.initialization.dns_search = 'lago.local' vm_params.initialization.domain = 'lago.local' vm_params.initialization.dns_servers = management_gw_ip vm0_service = test_utils.get_vm_service(engine, VM0_NAME) > vm0_service.start(use_cloud_init=True, vm=vm_params) ../basic-suite-master/test-scenarios/test_004_basic_sanity.py:915: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ /usr/lib64/python2.7/site-packages/ovirtsdk4/services.py:32520: in start return self._internal_action(action, 'start', None, headers, query, wait) /usr/lib64/python2.7/site-packages/ovirtsdk4/service.py:299: in _internal_action return future.wait() if wait else future /usr/lib64/python2.7/site-packages/ovirtsdk4/service.py:55: in wait return self._code(response) /usr/lib64/python2.7/site-packages/ovirtsdk4/service.py:296: in callback self._check_fault(response) /usr/lib64/python2.7/site-packages/ovirtsdk4/service.py:134: in _check_fault self._raise_error(response, body.fault) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ response = <ovirtsdk4.http.Response object at 0x7f07cd4e4690> detail = <ovirtsdk4.types.Fault object at 0x7f07cd4e4710> @staticmethod def _raise_error(response, detail=None): """ Creates and raises an error containing the details of the given HTTP response and fault. This method is intended for internal use by other components of the SDK. Refrain from using it directly, as backwards compatibility isn't guaranteed. """ fault = detail if isinstance(detail, types.Fault) else None msg = '' if fault: if fault.reason: if msg: msg += ' ' msg = msg + 'Fault reason is "%s".' % fault.reason if fault.detail: if msg: msg += ' ' msg = msg + 'Fault detail is "%s".' % fault.detail if response: if response.code: if msg: msg += ' ' msg = msg + 'HTTP response code is %s.' % response.code if response.message: if msg: msg += ' ' msg = msg + 'HTTP response message is "%s".' % response.message if isinstance(detail, six.string_types): if msg: msg += ' ' msg = msg + detail + '.' class_ = Error if response is not None: if response.code in [401, 403]: class_ = AuthError elif response.code == 404: class_ = NotFoundError error = class_(msg) error.code = response.code if response else None error.fault = fault > raise error E Error: Fault reason is "Operation Failed". Fault detail is "[Network error during communication with the Host.]". HTTP response code is 400. /usr/lib64/python2.7/site-packages/ovirtsdk4/service.py:118: Error

1 2

[oVirt Jenkins] ovirt-system-tests_openshift-on-ovirt-suite-4.2 - Build # 682 - Still Failing!
by jenkins＠jenkins.phx.ovirt.org 06 Dec '20

06 Dec '20

Project: https://jenkins.ovirt.org/job/ovirt-system-tests_openshift-on-ovirt-suite-4… Build: https://jenkins.ovirt.org/job/ovirt-system-tests_openshift-on-ovirt-suite-4… Build Number: 682 Build Status: Still Failing Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #676 [Marcin Sobczyk] network: Run network suite master on el8 Changes for Build #677 [Marcin Sobczyk] network: Run network suite master on el8 Changes for Build #678 [Andrej Cernek] network, hostlib: refactor setup_networks method [Barak Korren] usrc: Support *.yml files Changes for Build #679 [Galit] Remove basic-suite-4.2 suite Changes for Build #680 [Marcin Sobczyk] basic: Verify glance template creation before tearing down the engine Changes for Build #681 [Marcin Sobczyk] ost-images: Use OST images when available Changes for Build #682 [Ehud Yonasi] fix el7 container label. [Roy Golan] Removing rgolan(a)redhat.com from email notifs ----------------- Failed Tests: ----------------- No tests ran.

1 142

[oVirt Jenkins] ovirt-system-tests_compat-4.3-suite-master - Build # 394 - Failure!
by jenkins＠jenkins.phx.ovirt.org 06 Dec '20

06 Dec '20

Project: https://jenkins.ovirt.org/job/ovirt-system-tests_compat-4.3-suite-master/ Build: https://jenkins.ovirt.org/job/ovirt-system-tests_compat-4.3-suite-master/39… Build Number: 394 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #394 [Sandro Bonazzola] repos: fix Advanced Virtualization repos [Sandro Bonazzola] mirrors: drop gluster 5 mirroring ----------------- Failed Tests: ----------------- No tests ran.

1 251

oVirt infra daily report - unstable production jobs - 1396
by jenkins＠jenkins.phx.ovirt.org 06 Dec '20

06 Dec '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1396//artifact/exported… Cheers, Jenkins

1 0

[oVirt Jenkins] ovirt-system-tests_basic-suite-master_nightly - Build # 640 - Failure!
by jenkins＠jenkins.phx.ovirt.org 05 Dec '20

05 Dec '20

Project: https://jenkins.ovirt.org/job/ovirt-system-tests_basic-suite-master_nightly/ Build: https://jenkins.ovirt.org/job/ovirt-system-tests_basic-suite-master_nightly… Build Number: 640 Build Status: Failure Triggered By: Started by timer ------------------------------------- Changes Since Last Success: ------------------------------------- Changes for Build #640 [Liran Rotenberg] basic_sanity: check snapshot in clone test ----------------- Failed Tests: ----------------- 1 tests failed. FAILED: basic-suite-master.test-scenarios.test_004_basic_sanity.test_run_vms Error Message: Error: Fault reason is "Operation Failed". Fault detail is "[Network error during communication with the Host.]". HTTP response code is 400. Stack Trace: assert_vm_is_alive = <function is_alive at 0x7f39f0a3f848> engine_api = <ovirtsdk4.Connection object at 0x7f39f0a58590> management_gw_ip = '192.168.201.1' @order_by(_TEST_LIST) def test_run_vms(assert_vm_is_alive, engine_api, management_gw_ip): engine = engine_api.system_service() vm_params = types.Vm( initialization=types.Initialization( user_name=VM_USER_NAME, root_password=VM_PASSWORD ) ) vm_params.initialization.host_name = BACKUP_VM_NAME backup_vm_service = test_utils.get_vm_service(engine, BACKUP_VM_NAME) backup_vm_service.start(use_cloud_init=True, vm=vm_params) vm_params.initialization.host_name = VM2_NAME vm2_service = test_utils.get_vm_service(engine, VM2_NAME) vm2_service.start(use_cloud_init=True, vm=vm_params) # CirrOS cloud-init is different, networking doesn't work since it doesn't support the format oVirt is using vm_params.initialization.host_name = VM0_NAME # hostname seems to work, the others not vm_params.initialization.dns_search = 'lago.local' vm_params.initialization.domain = 'lago.local' vm_params.initialization.dns_servers = management_gw_ip vm0_service = test_utils.get_vm_service(engine, VM0_NAME) > vm0_service.start(use_cloud_init=True, vm=vm_params) ../basic-suite-master/test-scenarios/test_004_basic_sanity.py:915: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ /usr/lib64/python2.7/site-packages/ovirtsdk4/services.py:32520: in start return self._internal_action(action, 'start', None, headers, query, wait) /usr/lib64/python2.7/site-packages/ovirtsdk4/service.py:299: in _internal_action return future.wait() if wait else future /usr/lib64/python2.7/site-packages/ovirtsdk4/service.py:55: in wait return self._code(response) /usr/lib64/python2.7/site-packages/ovirtsdk4/service.py:296: in callback self._check_fault(response) /usr/lib64/python2.7/site-packages/ovirtsdk4/service.py:134: in _check_fault self._raise_error(response, body.fault) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ response = <ovirtsdk4.http.Response object at 0x7f39eab66690> detail = <ovirtsdk4.types.Fault object at 0x7f39eab66710> @staticmethod def _raise_error(response, detail=None): """ Creates and raises an error containing the details of the given HTTP response and fault. This method is intended for internal use by other components of the SDK. Refrain from using it directly, as backwards compatibility isn't guaranteed. """ fault = detail if isinstance(detail, types.Fault) else None msg = '' if fault: if fault.reason: if msg: msg += ' ' msg = msg + 'Fault reason is "%s".' % fault.reason if fault.detail: if msg: msg += ' ' msg = msg + 'Fault detail is "%s".' % fault.detail if response: if response.code: if msg: msg += ' ' msg = msg + 'HTTP response code is %s.' % response.code if response.message: if msg: msg += ' ' msg = msg + 'HTTP response message is "%s".' % response.message if isinstance(detail, six.string_types): if msg: msg += ' ' msg = msg + detail + '.' class_ = Error if response is not None: if response.code in [401, 403]: class_ = AuthError elif response.code == 404: class_ = NotFoundError error = class_(msg) error.code = response.code if response else None error.fault = fault > raise error E Error: Fault reason is "Operation Failed". Fault detail is "[Network error during communication with the Host.]". HTTP response code is 400. /usr/lib64/python2.7/site-packages/ovirtsdk4/service.py:118: Error

1 2

oVirt infra daily report - unstable production jobs - 1395
by jenkins＠jenkins.phx.ovirt.org 05 Dec '20

05 Dec '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1395//artifact/exported… Cheers, Jenkins

1 0