- Infra - oVirt List Archives

[CQ]: 91658, 4 (ovirt-engine) failed "ovirt-4.2" system tests, but isn't the failure root cause
by oVirt Jenkins 29 May '18

29 May '18

A system test invoked by the "ovirt-4.2" change queue including change 91658,4 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 91638,2 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 91638,2 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/91658/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/91638/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.2_change-queue-tester/2065/

1 0

[CQ]: 90813, 16 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 29 May '18

29 May '18

A system test invoked by the "ovirt-master" change queue including change 90813,16 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 91445,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 91445,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/90813/16 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/91445/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/7849/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-updates-el7-x86_64 #1608
by jenkins＠jenkins.phx.ovirt.org 29 May '18

29 May '18

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-updates-el7-x86_64/…> Changes: [arachmani] ovirt-host: move from fc27 to fc28 [arachmani] otopi: move from fc27 to fc28 ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-updates-el7-x86_64/…> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision a3787bb50ddfd77fb746abc6c9707592bcedf71b (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f a3787bb50ddfd77fb746abc6c9707592bcedf71b Commit message: "otopi: move from fc27 to fc28" > git rev-list --no-walk c8de598b1c824cbb4efb25e309c2dc5d12fb2fe8 # timeout=10 [system-sync_mirrors-centos-updates-el7-x86_64] $ /bin/bash -xe /tmp/jenkins509369908026614142.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-updates-el7 x86_64 jenkins/data/mirrors-reposync.conf Checking if mirror needs a resync Traceback (most recent call last): File "/usr/bin/reposync", line 343, in <module> main() File "/usr/bin/reposync", line 175, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1474, in _commonLoadRepoXML if self._latestRepoXML(local): File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1443, in _latestRepoXML oxml = self._saveOldRepoXML(local) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1300, in _saveOldRepoXML shutil.copy2(local, old_local) File "/usr/lib64/python2.7/shutil.py", line 131, in copy2 copystat(src, dst) File "/usr/lib64/python2.7/shutil.py", line 98, in copystat os.utime(dst, (st.st_atime, st.st_mtime)) OSError: [Errno 2] No such file or directory: '/home/jenkins/mirrors_cache/centos-extras-el7/repomd.xml.old.tmp' Build step 'Execute shell' marked build as failure

1 1

[CQ]: 90799, 16 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 29 May '18

29 May '18

A system test invoked by the "ovirt-master" change queue including change 90799,16 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 91445,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 91445,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/90799/16 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/91445/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/7844/

1 0

[oVirt Jenkins] ovirt-system-tests_he-node-ng-suite-master - Build # 1 - Failure!
by jenkins＠jenkins.phx.ovirt.org 29 May '18

29 May '18

Project: http://jenkins.ovirt.org/job/ovirt-system-tests_he-node-ng-suite-master/ Build: http://jenkins.ovirt.org/job/ovirt-system-tests_he-node-ng-suite-master/1/ Build Number: 1 Build Status: Failure Triggered By: Started by user Gal Ben Haim ------------------------------------- Changes Since Last Success: ------------------------------------- ----------------- Failed Tests: ----------------- No tests ran.

1 44

[CQ]: 91303, 4 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 29 May '18

29 May '18

A system test invoked by the "ovirt-master" change queue including change 91303,4 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 91445,5 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 91445,5 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/91303/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/91445/5 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/7839/

1 0

[JIRA] (OVIRT-2062) Move common groovy code base to a separate file
by Daniel Belenky (oVirt JIRA) 29 May '18

29 May '18

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2062?page=com.atlassian.jira.… ] Daniel Belenky reassigned OVIRT-2062: ------------------------------------- Assignee: Daniel Belenky (was: infra) > Move common groovy code base to a separate file > ----------------------------------------------- > > Key: OVIRT-2062 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2062 > Project: oVirt - virtualization made easy > Issue Type: Improvement > Reporter: Daniel Belenky > Assignee: Daniel Belenky > > Currently, we have some common code base in standard-stage and change-queue. > We should move the common code into a separate file. This will prevent us having to port code from one > module to another. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100086)

1 0

[JIRA] (OVIRT-2062) Move common groovy code base to a separate file
by Daniel Belenky (oVirt JIRA) 29 May '18

29 May '18

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2062?page=com.atlassian.jira.… ] Daniel Belenky updated OVIRT-2062: ---------------------------------- Issue Type: Improvement (was: New Feature) > Move common groovy code base to a separate file > ----------------------------------------------- > > Key: OVIRT-2062 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2062 > Project: oVirt - virtualization made easy > Issue Type: Improvement > Reporter: Daniel Belenky > Assignee: infra > > Currently, we have some common code base in standard-stage and change-queue. > We should move the common code into a separate file. This will prevent us having to port code from one > module to another. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100086)

1 0

[JIRA] (OVIRT-2062) Move common groovy code base to a separate file
by Daniel Belenky (oVirt JIRA) 29 May '18

29 May '18

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2062?page=com.atlassian.jira.… ] Daniel Belenky updated OVIRT-2062: ---------------------------------- Epic Link: OVIRT-400 > Move common groovy code base to a separate file > ----------------------------------------------- > > Key: OVIRT-2062 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2062 > Project: oVirt - virtualization made easy > Issue Type: New Feature > Reporter: Daniel Belenky > Assignee: infra > > Currently, we have some common code base in standard-stage and change-queue. > We should move the common code into a separate file. This will prevent us having to port code from one > module to another. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100086)

1 0

[JIRA] (OVIRT-2062) Move common groovy code base to a separate file
by Daniel Belenky (oVirt JIRA) 29 May '18

29 May '18

Daniel Belenky created OVIRT-2062: ------------------------------------- Summary: Move common groovy code base to a separate file Key: OVIRT-2062 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2062 Project: oVirt - virtualization made easy Issue Type: New Feature Reporter: Daniel Belenky Assignee: infra Currently, we have some common code base in standard-stage and change-queue. We should move the common code into a separate file. This will prevent us having to port code from one module to another. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100086)

1 0