- Infra - oVirt List Archives

Permission to (re-)trigger gerrit builds in jenkins
by Dominik Holler 25 Oct '16

25 Oct '16

Hi, I like to have the permission to retrigger failed gerrit builds on the jenkins build system. Who can enable me to do so? Thanks, Dominik

2 1

[JIRA] (OVIRT-778) Give jhernand Jenkins permissions
by Gil Shinar (oVirt JIRA) 25 Oct '16

25 Oct '16

[ https://ovirt-jira.atlassian.net/browse/OVIRT-778?page=com.atlassian.jira.p… ] Gil Shinar updated OVIRT-778: ----------------------------- Resolution: Fixed Status: Done (was: To Do) > Give jhernand Jenkins permissions > --------------------------------- > > Key: OVIRT-778 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-778 > Project: oVirt - virtualization made easy > Issue Type: Task > Components: Jenkins > Reporter: Juan Hernández > Assignee: infra > > I would like to have permissions to trigger jobs. -- This message was sent by Atlassian JIRA (v1000.456.2#100016)

1 0

[JIRA] (OVIRT-780) engine upgrade job is disabling puppet on slaves
by Barak Korren (oVirt JIRA) 25 Oct '16

25 Oct '16

[ https://ovirt-jira.atlassian.net/browse/OVIRT-780?page=com.atlassian.jira.p… ] Barak Korren commented on OVIRT-780: ------------------------------------ We need this because engine-setup does not know how to recover from a locked yum. Effectively this means that if Puppet runs while engine-setup is running, the engine-setup will fail. Engine upgrade cannot run inside mock because it needs access to things like systemd which are not typically found inside mock. We've discussed this in the past, we should have a ticket somewhere to migrate the upgrade jobs to Lago. > engine upgrade job is disabling puppet on slaves > ------------------------------------------------ > > Key: OVIRT-780 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-780 > Project: oVirt - virtualization made easy > Issue Type: Improvement > Reporter: Evgheni Dereveanchin > Assignee: infra > Priority: Low > > I found a lot of out-of-sync slaves in Foreman and further investigation revealed that puppet agent is disabled on them. > The journal indicates that it's the upgrade job doing this: > Oct 19 14:24:51 vm0079.workers-phx.ovirt.org sudo[18213]: jenkins : TTY=unknown ; PWD=/home/jenkins/workspace/ovirt-engine_master_upgrade-from-4.0_el7_created ; USER=root ; COMMAND=/bin/puppet agent --disable > Oct 19 14:24:54 vm0079.workers-phx.ovirt.org puppet-agent[18215]: Disabling Puppet. > The job seems to re-enable puppet after it runs, but once there's several consecutive jobs in the queue this causes puppet to be effectively turned off for hours. > Do we really need this? Can we run engine upgrade jobs inside mock to not affect the node itself? -- This message was sent by Atlassian JIRA (v1000.456.2#100016)

1 0

[JIRA] (OVIRT-787) [URGENT] can't login to foreman.ovirt.org with ssh certificate
by sbonazzo (oVirt JIRA) 25 Oct '16

25 Oct '16

sbonazzo created OVIRT-787: ------------------------------ Summary: [URGENT] can't login to foreman.ovirt.org with ssh certificate Key: OVIRT-787 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-787 Project: oVirt - virtualization made easy Issue Type: By-EMAIL Reporter: sbonazzo Assignee: infra Please check foreman.ovirt.org configuration since I can't login anymore using my certificate. $ ssh resources.ovirt.org sign_and_send_pubkey: signing failed: agent refused operation sbonazzo(a)foreman.ovirt.org's password: -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com <https://www.redhat.com/it/about/events/red-hat-open-source-day-2016> -- This message was sent by Atlassian JIRA (v1000.456.2#100016)

1 0

oVirt infra daily report - unstable production jobs - 117
by jenkins＠jenkins.phx.ovirt.org 25 Oct '16

25 Oct '16

------=_Part_50_1651204258.1477350011047 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/117//artifact/exported-a… Cheers, Jenkins ------=_Part_50_1651204258.1477350011047 Content-Type: application/octet-stream; name=upstream_report.html Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=upstream_report.html Content-ID: <upstream_report.html> <!DOCTYPE html><head><style type="text/css"> table.gridtable { border-collapse: collapse; table-layout:fixed; width:1600px; font-family: monospace; font-size:13px; } .head { font-size:20px; font-family: arial; } .sub { font-size:18px; background-color:#e5e5e5; font-family: arial; } pre { font-family: monospace; display: inline; white-space: pre-wrap; white-space: -moz-pre-wrap !important; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: break-word; } </style> </head> <body> <table class="gridtable" border=2> <tr><th colspan=2 class=head> RHEVM CI Jenkins Daily Report - 24/10/2016 </th></tr><tr><th colspan=2 class=sub> <font color="blue"><a href="http://jenkins.ovirt.org/">00 Unstable Jobs (Production)</a></font> </th></tr> <tr><td> <a href="http://jenkins.ovirt.org/job/ovirt-engine_master_find-bugs_merged/">ovirt-engine_master_find-bugs_merged</a> </td><td> This job is automatically updated by jenkins job builder, any manual change will be lost in the next update. If you want to make permanent changes, check out the <a href="http://gerrit.ovirt.org/gitweb?p=jenkins.git;a=tree;h=refs/heads/master;hb=…"> jenkins</a> repo.  </td></tr> <tr><td> <a href="http://jenkins.ovirt.org/job/ovirt-node-ng_master_build-artifacts-el7-x86_6…">ovirt-node-ng_master_build-artifacts-el7-x86_64</a> </td><td> This job is automatically updated by jenkins job builder, any manual change will be lost in the next update. If you want to make permanent changes, check out the <a href="http://gerrit.ovirt.org/gitweb?p=jenkins.git;a=tree;h=refs/heads/master;hb=…"> jenkins</a> repo.  </td></tr> <tr><td> <a href="http://jenkins.ovirt.org/job/ovirt-release_master_build-artifacts-all-x86_6…">ovirt-release_master_build-artifacts-all-x86_64</a> </td><td> This job is automatically updated by jenkins job builder, any manual change will be lost in the next update. If you want to make permanent changes, check out the <a href="http://gerrit.ovirt.org/gitweb?p=jenkins.git;a=tree;h=refs/heads/master;hb=…"> jenkins</a> repo.  </td></tr> <tr><td> <a href="http://jenkins.ovirt.org/job/ovirt_3.6_image-ng-system-tests/">ovirt_3.6_image-ng-system-tests</a> </td><td> This job is automatically updated by jenkins job builder, any manual change will be lost in the next update. If you want to make permanent changes, check out the <a href="http://gerrit.ovirt.org/gitweb?p=jenkins.git;a=tree;h=refs/heads/master;hb=…"> jenkins</a> repo.  </td></tr> <tr><td> <a href="http://jenkins.ovirt.org/job/repos_4.0_check-closure_fc23_merged/">repos_4.0_check-closure_fc23_merged</a> </td><td> This job is automatically updated by jenkins job builder, any manual change will be lost in the next update. If you want to make permanent changes, check out the <a href="http://gerrit.ovirt.org/gitweb?p=jenkins.git;a=tree;h=refs/heads/master;hb=…"> jenkins</a> repo.  </td></tr> <tr><td> <a href="http://jenkins.ovirt.org/job/repos_master_check-closure_fc24_merged/">repos_master_check-closure_fc24_merged</a> </td><td> This job is automatically updated by jenkins job builder, any manual change will be lost in the next update. If you want to make permanent changes, check out the <a href="http://gerrit.ovirt.org/gitweb?p=jenkins.git;a=tree;h=refs/heads/master;hb=…"> jenkins</a> repo.  </td></tr> <tr><td> <a href="http://jenkins.ovirt.org/job/system-backup_jenkins_ovirt_org/">system-backup_jenkins_ovirt_org</a> </td><td> This job is automatically updated by jenkins job builder, any manual change will be lost in the next update. If you want to make permanent changes, check out the <a href="http://gerrit.ovirt.org/gitweb?p=jenkins.git;a=tree;h=refs/heads/master;hb=…"> jenkins</a> repo.  </td></tr> <tr><td> <a href="http://jenkins.ovirt.org/job/test-repo_ovirt_experimental_3.6/">test-repo_ovirt_experimental_3.6</a> </td><td> This job is automatically updated by jenkins job builder, any manual change will be lost in the next update. If you want to make permanent changes, check out the <a href="http://gerrit.ovirt.org/gitweb?p=jenkins.git;a=tree;h=refs/heads/master;hb=…"> jenkins</a> repo.  </td></tr> <tr><td> <a href="http://jenkins.ovirt.org/job/vdsm_4.0_check-merged-fc23-x86_64/">vdsm_4.0_check-merged-fc23-x86_64</a> </td><td> This job is automatically updated by jenkins job builder, any manual change will be lost in the next update. If you want to make permanent changes, check out the <a href="http://gerrit.ovirt.org/gitweb?p=jenkins.git;a=tree;h=refs/heads/master;hb=…"> jenkins</a> repo.  </td></tr> ------=_Part_50_1651204258.1477350011047--

1 0

Build failed in Jenkins: ovirt_4.0_system-tests #578
by jenkins＠jenkins.phx.ovirt.org 24 Oct '16

24 Oct '16

See <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/578/changes> Changes: [Gal Ben Haim] Fix check-patch to collect logs on failure ------------------------------------------ [...truncated 702 lines...] ## took 2129 seconds ## rc = 1 ########################################################## ##! ERROR vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv ##! Last 20 log entries: logs/mocker-fedora-23-x86_64.fc23.basic_suite_4.0.sh/basic_suite_4.0.sh.log ##! + true + env_cleanup + echo '#########################' ######################### + local res=0 + local uuid + echo '======== Cleaning up' ======== Cleaning up + [[ -e <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/d…> ]] + echo '----------- Cleaning with lago' ----------- Cleaning with lago + lago --workdir <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/d…> destroy --yes --all-prefixes + echo '----------- Cleaning with lago done' ----------- Cleaning with lago done + [[ 0 != \0 ]] + echo '======== Cleanup done' ======== Cleanup done + exit 0 Took 1939 seconds =================================== ##! ##! ERROR ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ##!######################################################## ########################################################## Build step 'Execute shell' marked build as failure Performing Post build task... Match found for :.* : True Logical operation result is TRUE Running script : #!/bin/bash -xe echo 'shell_scripts/system_tests.collect_logs.sh' # # Required jjb vars: # version # VERSION=4.0 SUITE_TYPE= WORKSPACE="$PWD" OVIRT_SUITE="$SUITE_TYPE_suite_$VERSION" TESTS_LOGS="$WORKSPACE/ovirt-system-tests/exported-artifacts" rm -rf "$WORKSPACE/exported-artifacts" mkdir -p "$WORKSPACE/exported-artifacts" if [[ -d "$TESTS_LOGS" ]]; then mv "$TESTS_LOGS/"* "$WORKSPACE/exported-artifacts/" fi [ovirt_4.0_system-tests] $ /bin/bash -xe /tmp/hudson7830777977411951032.sh + echo shell_scripts/system_tests.collect_logs.sh shell_scripts/system_tests.collect_logs.sh + VERSION=4.0 + SUITE_TYPE= + WORKSPACE=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/> + OVIRT_SUITE=4.0 + TESTS_LOGS=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> + rm -rf <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/578/artifact/exported-a…> + mkdir -p <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/578/artifact/exported-a…> + [[ -d <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> ]] + mv <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/578/artifact/exported-a…> POST BUILD TASK : SUCCESS END OF POST BUILD TASK : 0 Match found for :.* : True Logical operation result is TRUE Running script : #!/bin/bash -xe echo "shell-scripts/mock_cleanup.sh" shopt -s nullglob WORKSPACE="$PWD" # Make clear this is the cleanup, helps reading the jenkins logs cat <<EOC _______________________________________________________________________ ####################################################################### # # # CLEANUP # # # ####################################################################### EOC # Archive the logs, we want them anyway logs=( ./*log ./*/logs ) if [[ "$logs" ]]; then tar cvzf exported-artifacts/logs.tgz "${logs[@]}" rm -rf "${logs[@]}" fi # stop any processes running inside the chroot failed=false mock_confs=("$WORKSPACE"/*/mocker*) # Clean current jobs mockroot if any for mock_conf_file in "${mock_confs[@]}"; do [[ "$mock_conf_file" ]] || continue echo "Cleaning up mock $mock_conf" mock_root="${mock_conf_file##*/}" mock_root="${mock_root%.*}" my_mock="/usr/bin/mock" my_mock+=" --configdir=${mock_conf_file%/*}" my_mock+=" --root=${mock_root}" my_mock+=" --resultdir=$WORKSPACE" #TODO: investigate why mock --clean fails to umount certain dirs sometimes, #so we can use it instead of manually doing all this. echo "Killing all mock orphan processes, if any." $my_mock \ --orphanskill \ || { echo "ERROR: Failed to kill orphans on $chroot." failed=true } mock_root="$(\ grep \ -Po "(?<=config_opts\['root'\] = ')[^']*" \ "$mock_conf_file" \ )" || : [[ "$mock_root" ]] || continue mounts=($(mount | awk '{print $3}' | grep "$mock_root")) || : if [[ "$mounts" ]]; then echo "Found mounted dirs inside the chroot $chroot. Trying to umount." fi for mount in "${mounts[@]}"; do sudo umount --lazy "$mount" \ || { echo "ERROR: Failed to umount $mount." failed=true } done done # Clean any leftover chroot from other jobs for mock_root in /var/lib/mock/*; do this_chroot_failed=false mounts=($(mount | awk '{print $3}' | grep "$mock_root")) || : if [[ "$mounts" ]]; then echo "Found mounted dirs inside the chroot $mock_root." \ "Trying to umount." fi for mount in "${mounts[@]}"; do sudo umount --lazy "$mount" \ || { echo "ERROR: Failed to umount $mount." failed=true this_chroot_failed=true } done if ! $this_chroot_failed; then sudo rm -rf "$mock_root" fi done if $failed; then echo "Aborting." exit 1 fi # remove mock system cache, we will setup proxies to do the caching and this # takes lots of space between runs shopt -u nullglob sudo rm -Rf /var/cache/mock/* # restore the permissions in the working dir, as sometimes it leaves files # owned by root and then the 'cleanup workspace' from jenkins job fails to # clean and breaks the jobs sudo chown -R "$USER" "$WORKSPACE" [ovirt_4.0_system-tests] $ /bin/bash -xe /tmp/hudson4784187459026537775.sh + echo shell-scripts/mock_cleanup.sh shell-scripts/mock_cleanup.sh + shopt -s nullglob + WORKSPACE=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/> + cat _______________________________________________________________________ ####################################################################### # # # CLEANUP # # # ####################################################################### + logs=(./*log ./*/logs) + [[ -n ./ovirt-system-tests/logs ]] + tar cvzf exported-artifacts/logs.tgz ./ovirt-system-tests/logs ./ovirt-system-tests/logs/ ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/ ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/stdout_stderr.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/state.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/build.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/root.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/ ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/stdout_stderr.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/state.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/build.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/root.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.clean_rpmdb/ ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.clean_rpmdb/stdout_stderr.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.basic_suite_4.0.sh/ ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.basic_suite_4.0.sh/basic_suite_4.0.sh.log + rm -rf ./ovirt-system-tests/logs + failed=false + mock_confs=("$WORKSPACE"/*/mocker*) + for mock_conf_file in '"${mock_confs[@]}"' + [[ -n <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/m…> ]] + echo 'Cleaning up mock ' Cleaning up mock + mock_root=mocker-fedora-23-x86_64.fc23.cfg + mock_root=mocker-fedora-23-x86_64.fc23 + my_mock=/usr/bin/mock + my_mock+=' --configdir=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests'> + my_mock+=' --root=mocker-fedora-23-x86_64.fc23' + my_mock+=' --resultdir=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/'> + echo 'Killing all mock orphan processes, if any.' Killing all mock orphan processes, if any. + /usr/bin/mock --configdir=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests> --root=mocker-fedora-23-x86_64.fc23 --resultdir=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/> --orphanskill WARNING: Could not find required logging config file: <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/l….> Using default... INFO: mock.py version 1.2.18 starting (python version = 3.5.1)... Start: init plugins INFO: selinux enabled Finish: init plugins Start: run Finish: run ++ grep -Po '(?<=config_opts\['\''root'\''\] = '\'')[^'\'']*' <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/m…> + mock_root=fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad + [[ -n fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad ]] + mounts=($(mount | awk '{print $3}' | grep "$mock_root")) ++ mount ++ awk '{print $3}' ++ grep fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad + : + [[ -n '' ]] + false + shopt -u nullglob + sudo rm -Rf /var/cache/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad + sudo chown -R jenkins <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/> POST BUILD TASK : SUCCESS END OF POST BUILD TASK : 1 Recording test results Archiving artifacts

1 1

Fwd: ** PROBLEM Service Alert: ovirt-mirrorchecker/mirrors.ibiblio.org/ovirt/pub mirror site last sync is CRITICAL **
by Nadav Goldin 24 Oct '16

24 Oct '16

Hi, It seems like the oVirt mirror at ibiblio.org has not been synchronized in the past 2 days, from the logs I see there was an attempted rsync connection but it took way longer than expected(10 hours), so I assume it hanged and eventually failed. Can you please have a look? Thanks, Nadav. ---------- Forwarded message ---------- From: icinga <icinga(a)monitoring.ovirt.org> Date: Mon, Oct 24, 2016 at 8:14 PM Subject: ** PROBLEM Service Alert: ovirt-mirrorchecker/mirrors.ibiblio.org/ovirt/pub mirror site last sync is CRITICAL ** To: ngoldin(a)redhat.com ***** Icinga ***** Notification Type: PROBLEM Service: mirrors.ibiblio.org/ovirt/pub mirror site last sync Host: ovirt-mirrorchecker Address: 66.187.230.105 State: CRITICAL Date/Time: Mon Oct 24 17:14:07 UTC 2016 Additional Info: CRITICAL - 432040 seconds since last sync, which are 120.0111 hours.

1 0

oVirt 4.0.5 RC4 merge / branch / tag / bugzilla reminder
by Anton Marchukov 24 Oct '16

24 Oct '16

All stable branch maintainers, please make sure to - merge all relevant open bugs until Wednesday morning 11:00 AM TLV time. For each package that need to be built (i.e oVirt product) please make sure every bug in MODIFIED has the right Target Release and Target Milestone. A Target release should state the version of the package you're building and should include the same version you used for the tag you just used for this build. (e.g. for ovirt-engine, tag: ovirt-engine-4.0.5.2, tr: 4.0.5.2) A list of bugs that require attention is here: - https://bugzilla.redhat.com/buglist.cgi?quicksearch= target_milestone%3A4.0.5%20target_release%3A---% 20status%3Amodified%2Cpost <https://bugzilla.redhat.com/buglist.cgi?quicksearch=target_milestone%3A4.0.…> -- Anton Marchukov Senior Software Engineer - RHEV CI - Red Hat

1 0

Build failed in Jenkins: ovirt_4.0_system-tests #576
by jenkins＠jenkins.phx.ovirt.org 24 Oct '16

24 Oct '16

See <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/576/changes> Changes: [Gal Ben Haim] Fix check-patch to collect logs on failure ------------------------------------------ [...truncated 702 lines...] ## took 1760 seconds ## rc = 1 ########################################################## ##! ERROR vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv ##! Last 20 log entries: logs/mocker-fedora-23-x86_64.fc23.basic_suite_4.0.sh/basic_suite_4.0.sh.log ##! + true + env_cleanup + echo '#########################' ######################### + local res=0 + local uuid + echo '======== Cleaning up' ======== Cleaning up + [[ -e <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/d…> ]] + echo '----------- Cleaning with lago' ----------- Cleaning with lago + lago --workdir <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/d…> destroy --yes --all-prefixes + echo '----------- Cleaning with lago done' ----------- Cleaning with lago done + [[ 0 != \0 ]] + echo '======== Cleanup done' ======== Cleanup done + exit 0 Took 1594 seconds =================================== ##! ##! ERROR ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ##!######################################################## ########################################################## Build step 'Execute shell' marked build as failure Performing Post build task... Match found for :.* : True Logical operation result is TRUE Running script : #!/bin/bash -xe echo 'shell_scripts/system_tests.collect_logs.sh' # # Required jjb vars: # version # VERSION=4.0 SUITE_TYPE= WORKSPACE="$PWD" OVIRT_SUITE="$SUITE_TYPE_suite_$VERSION" TESTS_LOGS="$WORKSPACE/ovirt-system-tests/exported-artifacts" rm -rf "$WORKSPACE/exported-artifacts" mkdir -p "$WORKSPACE/exported-artifacts" if [[ -d "$TESTS_LOGS" ]]; then mv "$TESTS_LOGS/"* "$WORKSPACE/exported-artifacts/" fi [ovirt_4.0_system-tests] $ /bin/bash -xe /tmp/hudson8167372824328849708.sh + echo shell_scripts/system_tests.collect_logs.sh shell_scripts/system_tests.collect_logs.sh + VERSION=4.0 + SUITE_TYPE= + WORKSPACE=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/> + OVIRT_SUITE=4.0 + TESTS_LOGS=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> + rm -rf <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/576/artifact/exported-a…> + mkdir -p <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/576/artifact/exported-a…> + [[ -d <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> ]] + mv <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/e…> <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/576/artifact/exported-a…> POST BUILD TASK : SUCCESS END OF POST BUILD TASK : 0 Match found for :.* : True Logical operation result is TRUE Running script : #!/bin/bash -xe echo "shell-scripts/mock_cleanup.sh" shopt -s nullglob WORKSPACE="$PWD" # Make clear this is the cleanup, helps reading the jenkins logs cat <<EOC _______________________________________________________________________ ####################################################################### # # # CLEANUP # # # ####################################################################### EOC # Archive the logs, we want them anyway logs=( ./*log ./*/logs ) if [[ "$logs" ]]; then tar cvzf exported-artifacts/logs.tgz "${logs[@]}" rm -rf "${logs[@]}" fi # stop any processes running inside the chroot failed=false mock_confs=("$WORKSPACE"/*/mocker*) # Clean current jobs mockroot if any for mock_conf_file in "${mock_confs[@]}"; do [[ "$mock_conf_file" ]] || continue echo "Cleaning up mock $mock_conf" mock_root="${mock_conf_file##*/}" mock_root="${mock_root%.*}" my_mock="/usr/bin/mock" my_mock+=" --configdir=${mock_conf_file%/*}" my_mock+=" --root=${mock_root}" my_mock+=" --resultdir=$WORKSPACE" #TODO: investigate why mock --clean fails to umount certain dirs sometimes, #so we can use it instead of manually doing all this. echo "Killing all mock orphan processes, if any." $my_mock \ --orphanskill \ || { echo "ERROR: Failed to kill orphans on $chroot." failed=true } mock_root="$(\ grep \ -Po "(?<=config_opts\['root'\] = ')[^']*" \ "$mock_conf_file" \ )" || : [[ "$mock_root" ]] || continue mounts=($(mount | awk '{print $3}' | grep "$mock_root")) || : if [[ "$mounts" ]]; then echo "Found mounted dirs inside the chroot $chroot. Trying to umount." fi for mount in "${mounts[@]}"; do sudo umount --lazy "$mount" \ || { echo "ERROR: Failed to umount $mount." failed=true } done done # Clean any leftover chroot from other jobs for mock_root in /var/lib/mock/*; do this_chroot_failed=false mounts=($(mount | awk '{print $3}' | grep "$mock_root")) || : if [[ "$mounts" ]]; then echo "Found mounted dirs inside the chroot $mock_root." \ "Trying to umount." fi for mount in "${mounts[@]}"; do sudo umount --lazy "$mount" \ || { echo "ERROR: Failed to umount $mount." failed=true this_chroot_failed=true } done if ! $this_chroot_failed; then sudo rm -rf "$mock_root" fi done if $failed; then echo "Aborting." exit 1 fi # remove mock system cache, we will setup proxies to do the caching and this # takes lots of space between runs shopt -u nullglob sudo rm -Rf /var/cache/mock/* # restore the permissions in the working dir, as sometimes it leaves files # owned by root and then the 'cleanup workspace' from jenkins job fails to # clean and breaks the jobs sudo chown -R "$USER" "$WORKSPACE" [ovirt_4.0_system-tests] $ /bin/bash -xe /tmp/hudson4194178916523079386.sh + echo shell-scripts/mock_cleanup.sh shell-scripts/mock_cleanup.sh + shopt -s nullglob + WORKSPACE=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/> + cat _______________________________________________________________________ ####################################################################### # # # CLEANUP # # # ####################################################################### + logs=(./*log ./*/logs) + [[ -n ./ovirt-system-tests/logs ]] + tar cvzf exported-artifacts/logs.tgz ./ovirt-system-tests/logs ./ovirt-system-tests/logs/ ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/ ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/state.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/build.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/stdout_stderr.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.install_packages/root.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/ ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/state.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/build.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/stdout_stderr.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.init/root.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.clean_rpmdb/ ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.clean_rpmdb/stdout_stderr.log ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.basic_suite_4.0.sh/ ./ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.basic_suite_4.0.sh/basic_suite_4.0.sh.log + rm -rf ./ovirt-system-tests/logs + failed=false + mock_confs=("$WORKSPACE"/*/mocker*) + for mock_conf_file in '"${mock_confs[@]}"' + [[ -n <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/m…> ]] + echo 'Cleaning up mock ' Cleaning up mock + mock_root=mocker-fedora-23-x86_64.fc23.cfg + mock_root=mocker-fedora-23-x86_64.fc23 + my_mock=/usr/bin/mock + my_mock+=' --configdir=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests'> + my_mock+=' --root=mocker-fedora-23-x86_64.fc23' + my_mock+=' --resultdir=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/'> + echo 'Killing all mock orphan processes, if any.' Killing all mock orphan processes, if any. + /usr/bin/mock --configdir=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests> --root=mocker-fedora-23-x86_64.fc23 --resultdir=<http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/> --orphanskill WARNING: Could not find required logging config file: <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/l….> Using default... INFO: mock.py version 1.2.18 starting (python version = 3.4.3)... Start: init plugins INFO: selinux enabled Finish: init plugins Start: run Finish: run ++ grep -Po '(?<=config_opts\['\''root'\''\] = '\'')[^'\'']*' <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/ovirt-system-tests/m…> + mock_root=fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad + [[ -n fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad ]] + mounts=($(mount | awk '{print $3}' | grep "$mock_root")) ++ mount ++ awk '{print $3}' ++ grep fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad + : + [[ -n '' ]] + false + shopt -u nullglob + sudo rm -Rf /var/cache/mock/fedora-23-x86_64-0c362156a2fa4a935ea8b988eb73b2ad + sudo chown -R jenkins <http://jenkins.ovirt.org/job/ovirt_4.0_system-tests/ws/> POST BUILD TASK : SUCCESS END OF POST BUILD TASK : 1 Recording test results Archiving artifacts

1 1

[JIRA] (OVIRT-786) patch systems against CVE-2016-5195
by Evgheni Dereveanchin (oVirt JIRA) 24 Oct '16

24 Oct '16

[ https://ovirt-jira.atlassian.net/browse/OVIRT-786?page=com.atlassian.jira.p… ] Evgheni Dereveanchin reassigned OVIRT-786: ------------------------------------------ Assignee: Evgheni Dereveanchin (was: infra) > patch systems against CVE-2016-5195 > ----------------------------------- > > Key: OVIRT-786 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-786 > Project: oVirt - virtualization made easy > Issue Type: Bug > Components: General > Reporter: Evgheni Dereveanchin > Assignee: Evgheni Dereveanchin > > There's a new local privilege escalation vulnerability in the wild named CVE-2016-5195 > Most of our systems don't have remote user access, but we should still patch kernels and reboot machines. > Patches are available for Fedora/Ubuntu/Debian but not for RHEL/CentOS yet. -- This message was sent by Atlassian JIRA (v1000.456.2#100016)

1 0