- Infra - oVirt List Archives

oVirt infra daily report - unstable production jobs - 1181
by jenkins＠jenkins.phx.ovirt.org 04 May '20

04 May '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1181//artifact/exported… Cheers, Jenkins

1 0

[CQ]: 108793, 1 (ovirt-system-tests) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 04 May '20

04 May '20

A system test invoked by the "ovirt-4.3" change queue including change 108793,1 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 108560,4 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 108560,4 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108793/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/108560/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3339/

1 0

[CQ]: 108750, 3 (ovirt-system-tests) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 04 May '20

04 May '20

A system test invoked by the "ovirt-4.3" change queue including change 108750,3 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 108560,4 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 108560,4 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108750/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/108560/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3338/

1 0

[CQ]: 108691, 6 (ovirt-system-tests) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 04 May '20

04 May '20

A system test invoked by the "ovirt-4.3" change queue including change 108691,6 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 108560,4 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 108560,4 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108691/6 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/108560/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3336/

1 0

[CQ]: cd62635 (ovirt-ansible-hosted-engine-setup) failed "ovirt-master" system tests
by oVirt Jenkins 04 May '20

04 May '20

Change cd62635 (ovirt-ansible-hosted-engine-setup) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://github.com/oVirt/ovirt-ansible-hosted-engine-setup/commit/cd6263558… For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23535/

1 0

[CQ]: 04795e2 (ovirt-ansible-hosted-engine-setup) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 04 May '20

04 May '20

A system test invoked by the "ovirt-master" change queue including change 04795e2 (ovirt-ansible-hosted-engine-setup) failed. However, this change seems not to be the root cause for this failure. Change e920aaf (ovirt-ansible- hosted-engine-setup) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change e920aaf (ovirt-ansible-hosted- engine-setup) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible-hosted-engine-setup/commit/04795e259… For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible-hosted-engine-setup/commit/e920aaf2a… For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23534/

1 0

[CQ]: 108710, 4 (ovirt-system-tests) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 04 May '20

04 May '20

A system test invoked by the "ovirt-4.3" change queue including change 108710,4 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 108560,4 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 108560,4 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108710/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/108560/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3334/

1 0

[CQ]: 108782, 5 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 04 May '20

04 May '20

A system test invoked by the "ovirt-master" change queue including change 108782,5 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 108654,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 108654,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108782/5 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/108654/3 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23532/

1 0

[CQ]: c8a48c8 (ovirt-ansible-engine-setup) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 04 May '20

04 May '20

A system test invoked by the "ovirt-master" change queue including change c8a48c8 (ovirt-ansible-engine-setup) failed. However, this change seems not to be the root cause for this failure. Change 57e474d (ovirt-ansible-engine-setup) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 57e474d (ovirt-ansible-engine- setup) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible-engine-setup/commit/c8a48c8767ac305a… For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible-engine-setup/commit/57e474de6e7c4c8e… For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23530/

1 0

Build failed in Jenkins: system-sync_mirrors-fedora-updates-fc30-x86_64 #1084
by jenkins＠jenkins.phx.ovirt.org 04 May '20

04 May '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-fedora-updates-fc30-x86_6…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-fedora-updates-fc30-x86_6…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error fetching remote repo 'origin' hudson.plugins.git.GitException: Failed to fetch from http://gerrit.ovirt.org/jenkins.git at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:909) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1131) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1167) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1206) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1856) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:43) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) Caused by: hudson.plugins.git.GitException: Command "git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'http://gerrit.ovirt.org/jenkins.git/': Could not resolve host: gerrit.ovirt.org; Unknown error at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2430) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2044) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.access$500(CliGitAPIImpl.java:81) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:569) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:161) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:154) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:369) at hudson.remoting.InterceptingExecutorService$1.call(InterceptingExecutorService.java:72) at java.util.concurrent.FutureTask.run(FutureTask.java:266) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) at java.lang.Thread.run(Thread.java:748) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to mirrors.phx.ovirt.org at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1788) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:998) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:146) at sun.reflect.GeneratedMethodAccessor933.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:498) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:132) at com.sun.proxy.$Proxy90.execute(Unknown Source) at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:907) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1131) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1167) at hudson.scm.SCM.checkout(SCM.java:505) at hudson.model.AbstractProject.checkout(AbstractProject.java:1206) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:574) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:86) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:499) at hudson.model.Run.execute(Run.java:1856) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:43) at hudson.model.ResourceController.execute(ResourceController.java:97) at hudson.model.Executor.run(Executor.java:428) ERROR: Error fetching remote repo 'origin'

1 1