- Infra - oVirt List Archives

[oVirt Jenkins] cleanup-gated-dummy-master - Build #115 - FAILURE!
by jenkins＠jenkins.phx.ovirt.org 17 Apr '20

17 Apr '20

Build: https://jenkins.ovirt.org/job/cleanup-gated-dummy-master/115/ Build Name: #115 Build Status: FAILURE Gerrit change: null - title: null - project: null - branch: null - author: null <null>

1 3

[CQ]: 108199, 1 (ovirt-imageio) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 17 Apr '20

17 Apr '20

A system test invoked by the "ovirt-master" change queue including change 108199,1 (ovirt-imageio) failed. However, this change seems not to be the root cause for this failure. Change 108147,1 (ovirt-imageio) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 108147,1 (ovirt-imageio) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108199/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/108147/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23151/

1 0

oVirt infra daily report - unstable production jobs - 1163
by jenkins＠jenkins.phx.ovirt.org 17 Apr '20

17 Apr '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1163//artifact/exported… Cheers, Jenkins

1 0

[CQ]: 108143, 4 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 17 Apr '20

17 Apr '20

A system test invoked by the "ovirt-master" change queue including change 108143,4 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 108152,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 108152,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108143/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/108152/3 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23143/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-powertools-el8-x86_64 #1
by jenkins＠jenkins.phx.ovirt.org 17 Apr '20

17 Apr '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-powertools-el8-x86…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-powertools-el8-x86…> No credentials specified Cloning the remote Git repository Cloning repository http://gerrit.ovirt.org/jenkins.git > git init <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-powertools-el8-x86…> # timeout=10 Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 No valid HEAD. Skipping the resetting > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 6355daf931835e16cdc89c0f8a6d8b1ffd90e73a (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 6355daf931835e16cdc89c0f8a6d8b1ffd90e73a Commit message: "OST: add metrics nightly suite for 4.3" First time build. Skipping changelog. [system-sync_mirrors-centos-powertools-el8-x86_64] $ /bin/bash -xe /tmp/jenkins4792023742492144039.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-powertools-el8 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + YUM_PATH=/yum/ + MIRRORS_BASE_PREFIX=/var/www/html/repos/yum/ + REPOQUERY_HTTP_BASE=http://mirrors.phx.ovirt.org/repos/yum/ + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + MAX_AGE=14 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-powertools-el8 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-powertools-el8 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-powertools-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-powertools-el8 yum + local repo_name=centos-powertools-el8 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-powertools-el8 /var/www/html/repos/yum/centos-powertools-el8/base + check_yum_sync_needed centos-powertools-el8 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-powertools-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-powertools-el8 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-powertools-el8 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-powertools-el8 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-powertools-el8 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-powertools-el8/base --norepopath --newest-only --urls --quiet Error setting up repositories: centos-powertools-el8: Check uncompressed DB failed + reposync_out= Build step 'Execute shell' marked build as failure

1 1

[CQ]: 108075, 3 (ovirt-imageio) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 16 Apr '20

16 Apr '20

A system test invoked by the "ovirt-master" change queue including change 108075,3 (ovirt-imageio) failed. However, this change seems not to be the root cause for this failure. Change 108147,1 (ovirt-imageio) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 108147,1 (ovirt-imageio) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108075/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/108147/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23135/

1 0

Build failed in Jenkins: system-sync_mirrors-ovirt-master-glusterfs-7-el8-x86_64 #44
by jenkins＠jenkins.phx.ovirt.org 16 Apr '20

16 Apr '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-ovirt-master-glusterfs-7-…> Changes: [Evgheni Dereveanchin] Define more CentOS 8 repo mirrors [Evgheni Dereveanchin] Fix typo in centos-extras-el8 mirror definition ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-ovirt-master-glusterfs-7-…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 14ecb6fb82f32da6d17ac418b863451ec63194ea (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 14ecb6fb82f32da6d17ac418b863451ec63194ea Commit message: "Fix typo in centos-extras-el8 mirror definition" > git rev-list --no-walk 7ff2d84e95416ee1b17480ab34f3fc11f26a6646 # timeout=10 [system-sync_mirrors-ovirt-master-glusterfs-7-el8-x86_64] $ /bin/bash -xe /tmp/jenkins6622915226753702384.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror ovirt-master-glusterfs-7-el8 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + YUM_PATH=/yum/ + MIRRORS_BASE_PREFIX=/var/www/html/repos/yum/ + REPOQUERY_HTTP_BASE=http://mirrors.phx.ovirt.org/repos/yum/ + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + MAX_AGE=14 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror ovirt-master-glusterfs-7-el8 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror ovirt-master-glusterfs-7-el8 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=ovirt-master-glusterfs-7-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs ovirt-master-glusterfs-7-el8 yum + local repo_name=ovirt-master-glusterfs-7-el8 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/ovirt-master-glusterfs-7-el8 /var/www/html/repos/yum/ovirt-master-glusterfs-7-el8/base + check_yum_sync_needed ovirt-master-glusterfs-7-el8 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=ovirt-master-glusterfs-7-el8 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/ovirt-master-glusterfs-7-el8 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync ovirt-master-glusterfs-7-el8 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=ovirt-master-glusterfs-7-el8 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=ovirt-master-glusterfs-7-el8 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/ovirt-master-glusterfs-7-el8/base --norepopath --newest-only --urls --quiet Error setting up repositories: File /home/jenkins/mirrors_cache/fedora-base-fc30/metalink.xml is not XML + reposync_out='Could not get metalink https://mirrors.fedoraproject.org/metalink?repo=fedora-30&arch=x86_64 error was 16: error opening file from https://mirrors.fedoraproject.org/metalink?repo=fedora-30&arch=x86_64, IOError: [Errno 2] No such file or directory: '\''/home/jenkins/mirrors_cache/fedora-base-fc30/metalink.xml.tmp'\''' Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: system-sync_mirrors-glusterfs-3.12-el7-x86_64 #2821
by jenkins＠jenkins.phx.ovirt.org 16 Apr '20

16 Apr '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-glusterfs-3.12-el7-x86_64…> Changes: [Evgheni Dereveanchin] Define more CentOS 8 repo mirrors ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-glusterfs-3.12-el7-x86_64…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 33b0b453a5688b9717c8ff0ba7b6fef04969d5f5 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 33b0b453a5688b9717c8ff0ba7b6fef04969d5f5 Commit message: "Define more CentOS 8 repo mirrors" > git rev-list --no-walk 7ff2d84e95416ee1b17480ab34f3fc11f26a6646 # timeout=10 [system-sync_mirrors-glusterfs-3.12-el7-x86_64] $ /bin/bash -xe /tmp/jenkins4145333931731438079.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror glusterfs-3.12-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + YUM_PATH=/yum/ + MIRRORS_BASE_PREFIX=/var/www/html/repos/yum/ + REPOQUERY_HTTP_BASE=http://mirrors.phx.ovirt.org/repos/yum/ + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + MAX_AGE=14 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror glusterfs-3.12-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror glusterfs-3.12-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=glusterfs-3.12-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs glusterfs-3.12-el7 yum + local repo_name=glusterfs-3.12-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/glusterfs-3.12-el7 /var/www/html/repos/yum/glusterfs-3.12-el7/base + check_yum_sync_needed glusterfs-3.12-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=glusterfs-3.12-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/glusterfs-3.12-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync glusterfs-3.12-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=glusterfs-3.12-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=glusterfs-3.12-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/glusterfs-3.12-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: Cannot find a valid baseurl for repo: centos-extras-el8 + reposync_out= Build step 'Execute shell' marked build as failure

1 1

[CQ]: 107996, 2 (ovirt-provider-ovn) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 16 Apr '20

16 Apr '20

A system test invoked by the "ovirt-master" change queue including change 107996,2 (ovirt-provider-ovn) failed. However, this change seems not to be the root cause for this failure. Change 107869,3 (ovirt-provider-ovn) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107869,3 (ovirt-provider-ovn) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107996/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107869/3 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/23127/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-kvm-common-el7-x86_64 #3481
by jenkins＠jenkins.phx.ovirt.org 16 Apr '20

16 Apr '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-kvm-common-el7-x86…> Changes: [Evgheni Dereveanchin] Define more CentOS 8 repo mirrors ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-kvm-common-el7-x86…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 33b0b453a5688b9717c8ff0ba7b6fef04969d5f5 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 33b0b453a5688b9717c8ff0ba7b6fef04969d5f5 Commit message: "Define more CentOS 8 repo mirrors" > git rev-list --no-walk 7ff2d84e95416ee1b17480ab34f3fc11f26a6646 # timeout=10 [system-sync_mirrors-centos-kvm-common-el7-x86_64] $ /bin/bash -xe /tmp/jenkins3061479776073978629.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-kvm-common-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + YUM_PATH=/yum/ + MIRRORS_BASE_PREFIX=/var/www/html/repos/yum/ + REPOQUERY_HTTP_BASE=http://mirrors.phx.ovirt.org/repos/yum/ + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + MAX_AGE=14 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-kvm-common-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-kvm-common-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-kvm-common-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-kvm-common-el7 yum + local repo_name=centos-kvm-common-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-kvm-common-el7 /var/www/html/repos/yum/centos-kvm-common-el7/base + check_yum_sync_needed centos-kvm-common-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-kvm-common-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-kvm-common-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-kvm-common-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-kvm-common-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-kvm-common-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-kvm-common-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: Cannot find a valid baseurl for repo: centos-extras-el8 + reposync_out= Build step 'Execute shell' marked build as failure

1 1