- Infra - oVirt List Archives

[CQ]: 99711, 3 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 06 May '19

06 May '19

A system test invoked by the "ovirt-master" change queue including change 99711,3 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 98920,15 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 98920,15 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/99711/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/98920/15 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/14012/

1 0

[CQ]: 99704, 2 (ovirt-hosted-engine-setup) failed "ovirt-master" system tests
by oVirt Jenkins 06 May '19

06 May '19

Change 99704,2 (ovirt-hosted-engine-setup) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/99704/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/14010/

1 0

[CQ]: 98657, 7 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 06 May '19

06 May '19

A system test invoked by the "ovirt-master" change queue including change 98657,7 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 98920,15 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 98920,15 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/98657/7 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/98920/15 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/14008/

1 0

Build failed in Jenkins: system-sync_mirrors-fedora-base-fc29-x86_64 #542
by jenkins＠jenkins.phx.ovirt.org 06 May '19

06 May '19

See <http://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc29-x86_64/54…> ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-fedora-base-fc29-x86_64/ws/> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 8e55d002d91e6007823c262509f8a9c40b8efcda (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 8e55d002d91e6007823c262509f8a9c40b8efcda Commit message: "automation: drop V1 fcraw jobs" > git rev-list --no-walk 8e55d002d91e6007823c262509f8a9c40b8efcda # timeout=10 [system-sync_mirrors-fedora-base-fc29-x86_64] $ /bin/bash -xe /tmp/jenkins7196085581457803182.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=fedora-base-fc29 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs fedora-base-fc29 yum + local repo_name=fedora-base-fc29 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/fedora-base-fc29 /var/www/html/repos/yum/fedora-base-fc29/base + check_yum_sync_needed fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=fedora-base-fc29 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/fedora-base-fc29 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync fedora-base-fc29 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=fedora-base-fc29 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=fedora-base-fc29 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/fedora-base-fc29/base --norepopath --newest-only --urls --quiet Traceback (most recent call last): File "/usr/bin/reposync", line 373, in <module> main() File "/usr/bin/reposync", line 185, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1482, in _commonLoadRepoXML result = self._getFileRepoXML(local, text) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1259, in _getFileRepoXML size=102400) # setting max size as 100K File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1025, in _getFile result = self.grab.urlgrab(misc.to_utf8(relative), local, File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 703, in <lambda> grab = property(lambda self: self._getgrab()) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 698, in _getgrab self._setupGrab() File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 635, in _setupGrab urls = self.urls File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 881, in <lambda> urls = property(fget=lambda self: self._geturls(), File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 878, in _geturls self._baseurlSetup() File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 824, in _baseurlSetup mirrorurls.extend(list(self.metalink_data.urls())) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 921, in <lambda> metalink_data = property(fget=lambda self: self._getMetalink(), File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 917, in _getMetalink self._metalink = metalink.MetaLinkRepoMD(self.metalink_filename) File "/usr/lib/python2.7/site-packages/yum/metalink.py", line 185, in __init__ raise MetaLinkRepoErrorParseFail, "File %s does not exist" %filename yum.metalink.MetaLinkRepoErrorParseFail: File /home/jenkins/mirrors_cache/fedora-base-fc29/metalink.xml does not exist + reposync_out='Could not parse metalink https://mirrors.fedoraproject.org/metalink?repo=fedora-29&arch=x86_64 error was File /home/jenkins/mirrors_cache/fedora-base-fc29/metalink.xml.tmp is not XML' Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: system-sync_mirrors-centos-kvm-common-el7-x86_64 #2441
by jenkins＠jenkins.phx.ovirt.org 05 May '19

05 May '19

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-kvm-common-el7-x86_…> ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-kvm-common-el7-x86_…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/changes/59/95959/1:test --prune > git rev-parse origin/test^{commit} # timeout=10 > git rev-parse test^{commit} # timeout=10 Checking out Revision 05b40dfb4ec43a82530e8c471395d1858e5c59e1 (test) > git config core.sparsecheckout # timeout=10 > git checkout -f 05b40dfb4ec43a82530e8c471395d1858e5c59e1 Commit message: "mirror-reposync: remove gluster-3.10 mirror" > git rev-list --no-walk 05b40dfb4ec43a82530e8c471395d1858e5c59e1 # timeout=10 [system-sync_mirrors-centos-kvm-common-el7-x86_64] $ /bin/bash -xe /tmp/jenkins8215446832373865404.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-kvm-common-el7 x86_64 jenkins/data/mirrors-reposync.conf Checking if mirror needs a resync Traceback (most recent call last): File "/usr/bin/reposync", line 373, in <module> main() File "/usr/bin/reposync", line 185, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1482, in _commonLoadRepoXML result = self._getFileRepoXML(local, text) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1259, in _getFileRepoXML size=102400) # setting max size as 100K File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1025, in _getFile result = self.grab.urlgrab(misc.to_utf8(relative), local, File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 703, in <lambda> grab = property(lambda self: self._getgrab()) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 698, in _getgrab self._setupGrab() File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 635, in _setupGrab urls = self.urls File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 881, in <lambda> urls = property(fget=lambda self: self._geturls(), File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 878, in _geturls self._baseurlSetup() File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 824, in _baseurlSetup mirrorurls.extend(list(self.metalink_data.urls())) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 921, in <lambda> metalink_data = property(fget=lambda self: self._getMetalink(), File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 900, in _getMetalink raise Errors.RepoError, msg yum.Errors.RepoError: Cannot retrieve metalink for repository: fedora-base-fc29. Please verify its path and try again Build step 'Execute shell' marked build as failure

1 1

oVirt infra daily report - unstable production jobs - 816
by jenkins＠jenkins.phx.ovirt.org 05 May '19

05 May '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/816//artifact/exported-a… Cheers, Jenkins

1 0

[CQ]: 99594, 10 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 05 May '19

05 May '19

A system test invoked by the "ovirt-master" change queue including change 99594,10 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 98920,15 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 98920,15 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/99594/10 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/98920/15 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/14006/

1 0

[CQ]: 99460, 3 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 05 May '19

05 May '19

A system test invoked by the "ovirt-master" change queue including change 99460,3 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 98920,15 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 98920,15 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/99460/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/98920/15 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/14005/

1 0

[CQ]: 98920,15 (ovirt-engine) failed "ovirt-master" system tests
by oVirt Jenkins 05 May '19

05 May '19

Change 98920,15 (ovirt-engine) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/98920/15 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/14003/

1 0

Re: [ovirt-devel] Jenkins is very slow now - can someone restart it?
by Nir Soffer 05 May '19

05 May '19

On Fri, May 3, 2019 at 5:14 PM Evgheni Dereveanchin <ederevea(a)redhat.com> wrote: > Hi Nir and thanks for the report. > > I've just upgraded Jenkins and restarted it. The ovirt-system-tests_manual > job page loads much faster for me now. > It still takes some time yet that's due to the fact that Jenkins reads > each build off disk for this status page. > > Please tell me if it looks better on your side too. > This is still pretty bad. From tlv network: $ for i in $(seq 10); do /usr/bin/time -f %e curl -s https://jenkins.ovirt.org/job/ovirt-system-tests_manual/ >/dev/null; done 49.92 17.19 11.91 12.38 32.22 38.41 33.50 15.59 11.24 17.71 But it looks much better and consistent from my home network: $ for i in $(seq 10); do /usr/bin/time -f %e curl -s https://jenkins.ovirt.org/job/ovirt-system-tests_manual/ >/dev/null; done 9.99 11.71 9.98 10.75 9.76 9.87 10.87 9.98 10.15 10.60 So maybe this is an issue with tlv network, and not with jenkins? > > On Thu, May 2, 2019 at 8:27 PM Nir Soffer <nsoffer(a)redhat.com> wrote: > >> $ time curl -s https://jenkins.ovirt.org/job/ovirt-system-tests_manual/ >> >/dev/null >> >> real 0m27.380s >> user 0m0.038s >> sys 0m0.028s >> >> For reference: >> >> $ time curl -s https://travis-ci.org/oVirt/vdsm/builds >/dev/null >> >> real 0m0.614s >> user 0m0.027s >> sys 0m0.015s >> >> Can someone restart jenkins? >> _______________________________________________ >> Devel mailing list -- devel(a)ovirt.org >> To unsubscribe send an email to devel-leave(a)ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FEEE5AHK6B6UY… >> > > > -- > Regards, > Evgheni Dereveanchin >

2 1