- Infra - oVirt List Archives

[JIRA] (OVIRT-2714) Increase limits on concurrent https://jenkins.ovirt.org/job/ovirt-system-tests_manual/ jobs
by Michal Skrivanek (oVirt JIRA) 10 Apr '19

10 Apr '19

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2714?page=com.atlassian.jira.… ] Michal Skrivanek updated OVIRT-2714: ------------------------------------ Summary: Increase limits on concurrent https://jenkins.ovirt.org/job/ovirt-system-tests_manual/ jobs (was: CLONE - Increase limits on concurrent https://jenkins.ovirt.org/job/ovirt-system-tests_manual/ jobs) > Increase limits on concurrent https://jenkins.ovirt.org/job/ovirt-system-tests_manual/ jobs > ------------------------------------------------------------------------------------------- > > Key: OVIRT-2714 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2714 > Project: oVirt - virtualization made easy > Issue Type: Task > Reporter: Michal Skrivanek > Assignee: infra > > We started to use this job to build artifacts for running OST. > Looks like this job is limited to one concurrent job, which make it less > useful than > it could be. > If we don't make it easy to run OST, people will not run it, and the change > queue > will break. > Please change the limit to use the same limit used for regular builds. We > seem to be > able to create more then 10 concurrent builds by uploading patches to > gerrit. The manual > runner should this as well. > Nir -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100099)

1 0

[JIRA] (OVIRT-2714) CLONE - Increase limits on concurrent https://jenkins.ovirt.org/job/ovirt-system-tests_manual/ jobs
by Michal Skrivanek (oVirt JIRA) 10 Apr '19

10 Apr '19

Michal Skrivanek created OVIRT-2714: --------------------------------------- Summary: CLONE - Increase limits on concurrent https://jenkins.ovirt.org/job/ovirt-system-tests_manual/ jobs Key: OVIRT-2714 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2714 Project: oVirt - virtualization made easy Issue Type: Task Reporter: Michal Skrivanek Assignee: infra We started to use this job to build artifacts for running OST. Looks like this job is limited to one concurrent job, which make it less useful than it could be. If we don't make it easy to run OST, people will not run it, and the change queue will break. Please change the limit to use the same limit used for regular builds. We seem to be able to create more then 10 concurrent builds by uploading patches to gerrit. The manual runner should this as well. Nir -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100099)

1 0

[JIRA] (OVIRT-2713) Package does not match intended download on PHX mirror
by Evgheni Dereveanchin (oVirt JIRA) 10 Apr '19

10 Apr '19

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2713?page=com.atlassian.jira.… ] Evgheni Dereveanchin reassigned OVIRT-2713: ------------------------------------------- Assignee: Evgheni Dereveanchin (was: infra) > Package does not match intended download on PHX mirror > ------------------------------------------------------ > > Key: OVIRT-2713 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2713 > Project: oVirt - virtualization made easy > Issue Type: Bug > Reporter: Evgheni Dereveanchin > Assignee: Evgheni Dereveanchin > > I was working on updating some nodes and hit an issue that was reported before in CI. Basically, a package fails to install when running "yum update" with the following error: > Error downloading packages: > polkit-0.112-18.el7_6.1.x86_64: failed to retrieve Packages/polkit-0.112-18.el7_6.1.x86_64.rpm from centos-updates-el7 > error was [Errno -1] Package does not match intended download. Suggestion: run yum --enablerepo=centos-updates-el7 clean metadata > Last time I checked the file was intact on the mirror so it may be a sign of metadata corruption on the snapshot. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100099)

1 0

[JIRA] (OVIRT-2713) Package does not match intended download on PHX mirror
by Evgheni Dereveanchin (oVirt JIRA) 10 Apr '19

10 Apr '19

[ https://ovirt-jira.atlassian.net/browse/OVIRT-2713?page=com.atlassian.jira.… ] Evgheni Dereveanchin commented on OVIRT-2713: --------------------------------------------- The exact URL that fails is: http://mirrors.phx.ovirt.org/repos/yum/centos-updates-el7/base/Packages/pol… Downloading this file produces an md5sum of 79c1fa6804307bfc54833c880743c358 which matches the file from an upstream mirror: http://mirror.centos.org/centos/7/updates/x86_64/Packages/polkit-0.112-18.e… Running "rpm -Uvh" on the downloaded RPM does not produce any warnings either so it is intact. > Package does not match intended download on PHX mirror > ------------------------------------------------------ > > Key: OVIRT-2713 > URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2713 > Project: oVirt - virtualization made easy > Issue Type: Bug > Reporter: Evgheni Dereveanchin > Assignee: infra > > I was working on updating some nodes and hit an issue that was reported before in CI. Basically, a package fails to install when running "yum update" with the following error: > Error downloading packages: > polkit-0.112-18.el7_6.1.x86_64: failed to retrieve Packages/polkit-0.112-18.el7_6.1.x86_64.rpm from centos-updates-el7 > error was [Errno -1] Package does not match intended download. Suggestion: run yum --enablerepo=centos-updates-el7 clean metadata > Last time I checked the file was intact on the mirror so it may be a sign of metadata corruption on the snapshot. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100099)

1 0

[JIRA] (OVIRT-2713) Package does not match intended download on PHX mirror
by Evgheni Dereveanchin (oVirt JIRA) 10 Apr '19

10 Apr '19

Evgheni Dereveanchin created OVIRT-2713: ------------------------------------------- Summary: Package does not match intended download on PHX mirror Key: OVIRT-2713 URL: https://ovirt-jira.atlassian.net/browse/OVIRT-2713 Project: oVirt - virtualization made easy Issue Type: Bug Reporter: Evgheni Dereveanchin Assignee: infra I was working on updating some nodes and hit an issue that was reported before in CI. Basically, a package fails to install when running "yum update" with the following error: Error downloading packages: polkit-0.112-18.el7_6.1.x86_64: failed to retrieve Packages/polkit-0.112-18.el7_6.1.x86_64.rpm from centos-updates-el7 error was [Errno -1] Package does not match intended download. Suggestion: run yum --enablerepo=centos-updates-el7 clean metadata Last time I checked the file was intact on the mirror so it may be a sign of metadata corruption on the snapshot. -- This message was sent by Atlassian Jira (v1001.0.0-SNAPSHOT#100099)

1 0

[JENKINS] Failed to setup proejct vdsm_standard-check-patch
by jenkins＠jenkins.phx.ovirt.org 10 Apr '19

10 Apr '19

Failed to run project_setup.sh for: #4674 vdsm [check-patch]. It probably means that docker_cleanup.py failed. This step doesn't fail the job, but we do collect data about such failures to find the root cause. Infra owner, ensure that we're not running out of disk space on vm0042.workers-phx.ovirt.org.

1 0

[CQ]: 98922, 8 (ovirt-provider-ovn) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 10 Apr '19

10 Apr '19

A system test invoked by the "ovirt-4.3" change queue including change 98922,8 (ovirt-provider-ovn) failed. However, this change seems not to be the root cause for this failure. Change 99237,2 (ovirt-provider-ovn) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 99237,2 (ovirt-provider-ovn) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/98922/8 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/99237/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/623/

1 0

[CQ]: 98922, 8 (ovirt-provider-ovn) failed "ovirt-master" system tests
by oVirt Jenkins 10 Apr '19

10 Apr '19

Change 98922,8 (ovirt-provider-ovn) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/98922/8 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/13770/

1 0

oVirt infra daily report - unstable production jobs - 790
by jenkins＠jenkins.phx.ovirt.org 09 Apr '19

09 Apr '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/790//artifact/exported-a… Cheers, Jenkins

1 0

Build failed in Jenkins: system-sync_mirrors-glusterfs-5-el7-x86_64 #239
by jenkins＠jenkins.phx.ovirt.org 09 Apr '19

09 Apr '19

See <http://jenkins.ovirt.org/job/system-sync_mirrors-glusterfs-5-el7-x86_64/239…> ------------------------------------------ Started by timer [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-glusterfs-5-el7-x86_64/ws/> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* --prune > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision a6f2e271684c62613aab969ba1c988e4b85a51e8 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f a6f2e271684c62613aab969ba1c988e4b85a51e8 Commit message: "Make standard-manual-runner run concurrently" > git rev-list --no-walk a6f2e271684c62613aab969ba1c988e4b85a51e8 # timeout=10 [system-sync_mirrors-glusterfs-5-el7-x86_64] $ /bin/bash -xe /tmp/jenkins3715944413563678211.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror glusterfs-5-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror glusterfs-5-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror glusterfs-5-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=glusterfs-5-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs glusterfs-5-el7 yum + local repo_name=glusterfs-5-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/glusterfs-5-el7 /var/www/html/repos/yum/glusterfs-5-el7/base + check_yum_sync_needed glusterfs-5-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=glusterfs-5-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/glusterfs-5-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync glusterfs-5-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=glusterfs-5-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=glusterfs-5-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/glusterfs-5-el7/base --norepopath --newest-only --urls --quiet Traceback (most recent call last): File "/usr/bin/reposync", line 343, in <module> main() File "/usr/bin/reposync", line 175, in main my.doRepoSetup() File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 681, in doRepoSetup return self._getRepos(thisrepo, True) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 721, in _getRepos self._repos.doSetup(thisrepo) File "/usr/lib/python2.7/site-packages/yum/repos.py", line 157, in doSetup self.retrieveAllMD() File "/usr/lib/python2.7/site-packages/yum/repos.py", line 88, in retrieveAllMD dl = repo._async and repo._commonLoadRepoXML(repo) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 1465, in _commonLoadRepoXML local = self.cachedir + '/repomd.xml' File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 774, in <lambda> cachedir = property(lambda self: self._dirGetAttr('cachedir')) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 757, in _dirGetAttr self.dirSetup() File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 735, in dirSetup self._dirSetupMkdir_p(dir) File "/usr/lib/python2.7/site-packages/yum/yumRepo.py", line 712, in _dirSetupMkdir_p raise Errors.RepoError, msg yum.Errors.RepoError: Error making cache directory: /home/jenkins/mirrors_cache/glusterfs-5-el7/gen error was: [Errno 17] File exists: '/home/jenkins/mirrors_cache/glusterfs-5-el7/gen' + reposync_out= Build step 'Execute shell' marked build as failure

1 1