Hi all, I found that vdsm storage tests failed [1], and checked console output. Turns out that the storage tests were fine, but the test infrastructure is broken: 21:59:17 StorageTest 21:59:17 testCreatePoolErrors OK 21:59:23 testStorage(backendType='localfs', domVersion='0') OK 22:00:40 testStorage(backendType='localfs', domVersion='3') OK 22:00:50 ... 22:00:52 [vdsm_master_storage_functional_tests_localfs_gerrit] $ /bin/sh -xe /tmp/hudson2560576493759199190.sh 22:00:52 + sudo cp /var/log/vdsm/vdsm.log 22:00:52 cp: missing destination file operand after '/var/log/vdsm/vdsm.log' 22:00:52 Try 'cp --help' for more information. 22:00:54 POST BUILD TASK : FAILURE 22:00:54 END OF POST BUILD TASK : 0 22:00:54 Archiving artifacts 22:00:55 ERROR: No artifacts found that match the file pattern "*vdsm.log". Configuration error? 22:00:55 ERROR: ?*vdsm.log? doesn?t match anything 22:00:55 Build step 'Archive the artifacts' changed build result to FAILURE 22:00:55 Recording test results 22:00:56 Build step 'Groovy Postbuild' marked build as failure 22:00:57 Finished: FAILURE This bogus failure showed on gerrit as: http://jenkins.ovirt.org/job/vdsm_master_storage_functional_tests_localfs... : FAILURE There are 3 errors here: 1. cp command is missing an argument I fixed this in the job configuration 2. Error in artifacts archiving - probably because the previous step in the script failed, but nobody checks for error codes. Maybe the script should run with "set -e" ? 3. Error in the tests environment should result in "ERROR" output on gerrit, not "FAILURE". Hopefully someone can fix these errors. [1] http://jenkins.ovirt.org/job/vdsm_master_storage_functional_tests_localfs... Thanks, Nir