Re: OVS Task Error when Add EL Host
by Rui Crespo
Hi, I'm having the exact same problem doing a fresh install of RHEL and setting up (command line: hosted-engine --deploy --4) the ovirt-engine. I assume it must have been some kind of update to the base OS - (in my case RHEL 8.6 (Ootpa), because i have done previous installations with this exact OS and centos-release-ovirt45 repos without having an issues. The failed task is:
TASK [ovirt.ovirt.hosted_engine_setup : Wait for the host to be up]
and, on the hosted-engine log:
/var/log/ovirt-hosted-engine-setup/engine-logs-2022-10-11T18:43:29Z/log/ovirt-engine/host-deploy
I see:
"stdout" : "fatal: [xxxxx]: FAILED! => {\"msg\": \"The conditional check 'cluster_switch == \\\"ovs\\\" or (ovn_central is defined and ovn_central | ipaddr)' failed. The error was: The ipaddr filter requires python's netaddr be installed on the ansible controller\\n\\nThe error appears to be in '/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-provider-ovn-driver/tasks/configure.yml': line 3, column 5, but may\\nbe elsewhere in the file depending on the exact syntax problem.\\n\\nThe offending line appears to be:\\n\\n- block:\\n - name: Install ovs\\n ^ here\\n\"}",
2 years, 1 month
SSL error on oVirt 4.2.4
by Don Dupuis
Hello
I have oVirt cluster with 25 hypervisors that has been running fine for a
couple of years and today all of a sudden engine was getting ssl errors
talking to the hypervisors. Error in engine.log is:
2022-10-10 16:20:23,562-05 ERROR
[org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring]
(EE-ManagedThreadFactory-engineScheduled-Thread-47) [] Unable to
RefreshCapabilities: VDSNetworkException: VDSGenericException:
VDSNetworkException: Received fatal alert: unknown_ca
Certificates don't seem expired and I ran the command:
openssl x509 -noout -in /etc/pki/ovirt-engine/ca.pem -fingerprint
openssl x509 -noout -in /etc/pki/vdsm/certs/cacert.pem -fingerprint
# openssl x509 -noout -in /etc/pki/vdsm/libvirt-spice/ca-cert.pem -fingerprint
# openssl x509 -noout -in /etc/pki/vdsm/libvirt-vnc/ca-cert.pem -fingerprint
# openssl x509 -noout -in /etc/pki/CA/cacert.pem -fingerprint
Those commands show that the fingerprints are the same.
openssl verify -CAfile /etc/pki/ovirt-engine/ca.pem
/etc/pki/ovirt-engine/certs/engine.cer
# openssl verify -CAfile /etc/pki/ovirt-engine/ca.pem
/etc/pki/ovirt-engine/certs/apache.cer
# openssl verify -CAfile /etc/pki/ovirt-engine/ca.pem
/etc/pki/ovirt-engine/certs/websocket-proxy.cer
# openssl verify -CAfile /etc/pki/ovirt-engine/ca.pem
/etc/pki/ovirt-engine/certs/jboss.cer
# openssl verify -CAfile /etc/pki/ovirt-engine/ca.pem
/etc/pki/ovirt-engine/certs/imageio-proxy.cer
# openssl verify -CAfile /etc/pki/ovirt-engine/ca.pem
/etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer
These verification commands come back as OK. I am having trouble
finding my problem. Does anyone have any suggestions? I am not finding
any hits on google and unknown_ca.
Also the vdsm log on hypervisors has this:
2022-10-10 15:54:42,843-0500 ERROR (Reactor thread)
[ProtocolDetector.SSLHandshakeDispatcher] ssl handshake: SSLError,
address: ::ffff:192.168.50.26 (sslutils:263)
Thanks
Don
2 years, 1 month
Re: Snapshot not working
by Facundo Badaracco
Sorry for my ignorance. But, im trying since a few days to upload the
requested logs, but it keeping me saying they are too big. How con i upload
them?
El vie, 7 de oct. de 2022 19:09, Facundo Badaracco <varekoarfa(a)gmail.com>
escribió:
> sorry for the delay.
>
> there are the engine.log, vdsm.log from spm and the host where the vm is
> running.
>
> thx in advance!
>
> ---------- Forwarded message ---------
> De: Facundo Badaracco <varekoarfa(a)gmail.com>
> Date: jue, 6 oct 2022 a la(s) 20:22
> Subject: Re: [ovirt-users] Re: Snapshot not working
> To: Benny Zlotnik <bzlotnik(a)redhat.com>
>
>
> sorry for the delay.
>
> there are the engine.log, vdsm.log from spm and the host where the vm is
> running.
>
> thx in advance!
>
> El jue, 6 oct 2022 a la(s) 20:03, Facundo Badaracco (varekoarfa(a)gmail.com)
> escribió:
>
>> sorry for the delay.
>>
>> there are the engine.log, vdsm.log from spm and the host where the vm is
>> running.
>>
>> thx in advance!
>>
>>
>> El jue, 6 oct 2022 a la(s) 05:30, Benny Zlotnik (bzlotnik(a)redhat.com)
>> escribió:
>>
>>> Can you provide relevant ovirt-engine and vdsm logs (SPM and host where
>>> VM runs)
>>>
>>> On Tue, Oct 4, 2022 at 7:49 PM Facundo Badaracco <varekoarfa(a)gmail.com>
>>> wrote:
>>> >
>>> > Someone? Any hint?
>>> >
>>> > El jue, 29 de sep. de 2022 10:58, Facundo Badaracco <
>>> varekoarfa(a)gmail.com> escribió:
>>> >>
>>> >> hi everyone,
>>> >>
>>> >> I have a glusterFS replica x3 node.
>>> >>
>>> >> I can't create snapshot. when I create it, if I select to save the
>>> memory, then in the disks section only appears the snapshot of the memory
>>> and in locked state. If instead, I remove the option to make snapshot of
>>> the memory, it does not make the snapshot saying "failed".
>>> >>
>>> >> Any idea?
>>> >
>>> > _______________________________________________
>>> > Users mailing list -- users(a)ovirt.org
>>> > To unsubscribe send an email to users-leave(a)ovirt.org
>>> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
>>> > oVirt Code of Conduct:
>>> https://www.ovirt.org/community/about/community-guidelines/
>>> > List Archives:
>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/5LQQKPQC6LR...
>>>
>>>
2 years, 1 month
Convert raw images to qcow format
by Jonas
Hi there
I want to create incremental backups of a few imported VMs, but the VM disks are in the raw disk format which does not support incremental backup. Is there a way to convert existing disks from raw to qcow in oVirt? Since qemu-img can do this,I assume there must be a way..
Thank you
Jonas
2 years, 1 month
Pre-Installing OpenVSwitch For oVirt Self-Hoster Install - Issues?
by Matthew J Black
Hi All,
Is anyone aware of any issues (ie "gotchas") with pre-installing OpenVSwitch in preparation for an oVirt Self-Hosted install?
We're trying to work around an error we're getting with `hosted-engine --deploy` which spits out: `error: Failed to start network default\nerror: internal error: Network is already in use by interface bond1.a`. What we're thinking is if we pre-create the OVS Network (ie ovirtmgmt) then `hosted-engine --deploy` won't baulk and fail to install.
We've been grinding away at this and other issues for several weeks now and we're getting pretty desperate at this stage, to the point that we're starting to seriously consider giving up on oVirt completely - which would be a shame because it seems to be made for the job we want to do, but if we can't get it installed, let along working, then what's the point? (Plus I hate the thought of all the wasted time and effort - but that may just be the "suck cost fallacy" at work).
Anyway, if anyone has any insights we'd appreciate them.
Cheers
Dulux-Oz
2 years, 1 month
Re: OVS Task Error when Add EL Host
by Łukasz Pelczyk
I just hit the same error. Initially I got it on the beginning of installation (both netaddr and jmespath were not found). Seems that python3.9 is used so initially I solved it via pip3.9 install. Alternatively you can get the rpm packages from epel.
The same issues is on ovirt VM side. As a workaround I started deployment with pause (hosted-engine --deploy --ansible-extra-vars=he_pause_host=true). With that you can ssh to the instance, and manually run pip install which got me: 'Successfully installed jmespath-1.0.1 netaddr-0.8.0'.
This is just a workaround and proper fix should be reflected in engine VM image, or on the repos side.
2 years, 1 month
Re: OVS Task Error when Add EL Host
by Martin Perina
Hi,
please try to downgrade ansible-core-2.13 to 2.12, oVirt doesn't support
2.13 on EL8 yet.
Regards,
Martin
On Thu, Oct 6, 2022 at 3:23 PM Nur Imam Febrianto <nur_imam(a)outlook.com>
wrote:
> Hi,
>
>
>
> Getting strange error when adding EL Host (Using CentOS Stream 8) :
>
> The conditional check 'cluster_switch == \\\"ovs\\\" or (ovn_central is
> defined and ovn_central | ipaddr)' failed. The error was: The ipaddr filter
> requires python's netaddr be installed on the ansible controller\\n\\nThe
> error appears to be in
> '/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-provider-ovn-driver/tasks/configure.yml':
> line 3, column 5, but may\\nbe elsewhere in the file depending on the exact
> syntax problem.\\n\\nThe offending line appears to be:\\n\\n- block:\\n -
> name: Install ovs\\n ^ here\\n\"}",
>
> "msg" : "The conditional check 'cluster_switch == \"ovs\" or
> (ovn_central is defined and ovn_central | ipaddr)' failed. The error was:
> The ipaddr filter requires python's netaddr be installed on the ansible
> controller\n\nThe error appears to be in
> '/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-provider-ovn-driver/tasks/configure.yml':
> line 3, column 5, but may\nbe elsewhere in the file depending on the exact
> syntax problem.\n\nThe offending line appears to be:\n\n- block:\n - name:
> Install ovs\n ^ here\n"
>
>
>
> Already checking the python-netaddr and its already installed on the
> system (both python3-netaddr and python38-netaddr).
>
> Using oVirt 4.5. Anybody getting this same issue ?
>
>
>
> Thanks before.
>
> Regards,
>
> Nur Imam Febrianto
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows
>
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/EGVQEKGAA6O...
>
--
Martin Perina
Manager, Software Engineering
Red Hat Czech s.r.o.
2 years, 1 month
Question: How does ovirt storage domain differ from VMFS?
by jstk888＠gmail.com
Hello,
I was asked the other day what file system oVirt uses to store virtual machine images and how it differed from VMware VMFS. I had to admit that I didn't quite understand this aspect of oVirt. I've had a look around but haven't found an answer. I was wondering if someone could explain at a high level, how the underlying oVirt VM storage domain differs from VMFS? What file system is used? Does it use a file system at all?
Thank you.
2 years, 1 month
OVS Task Error when Add EL Host
by Nur Imam Febrianto
Hi,
Getting strange error when adding EL Host (Using CentOS Stream 8) :
The conditional check 'cluster_switch == \\\"ovs\\\" or (ovn_central is defined and ovn_central | ipaddr)' failed. The error was: The ipaddr filter requires python's netaddr be installed on the ansible controller\\n\\nThe error appears to be in '/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-provider-ovn-driver/tasks/configure.yml': line 3, column 5, but may\\nbe elsewhere in the file depending on the exact syntax problem.\\n\\nThe offending line appears to be:\\n\\n- block:\\n - name: Install ovs\\n ^ here\\n\"}",
"msg" : "The conditional check 'cluster_switch == \"ovs\" or (ovn_central is defined and ovn_central | ipaddr)' failed. The error was: The ipaddr filter requires python's netaddr be installed on the ansible controller\n\nThe error appears to be in '/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-provider-ovn-driver/tasks/configure.yml': line 3, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n- block:\n - name: Install ovs\n ^ here\n"
Already checking the python-netaddr and its already installed on the system (both python3-netaddr and python38-netaddr).
Using oVirt 4.5. Anybody getting this same issue ?
Thanks before.
Regards,
Nur Imam Febrianto
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
2 years, 1 month
Snapshot not working
by Facundo Badaracco
hi everyone,
I have a glusterFS replica x3 node.
I can't create snapshot. when I create it, if I select to save the memory,
then in the disks section only appears the snapshot of the memory and in
locked state. If instead, I remove the option to make snapshot of the
memory, it does not make the snapshot saying "failed".
Any idea?
2 years, 1 month
