December 2019 - Infra - oVirt List Archives

[CQ]: 105491, 1 (ovirt-engine-nodejs-modules) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 15 Dec '19

15 Dec '19

A system test invoked by the "ovirt-master" change queue including change 105491,1 (ovirt-engine-nodejs-modules) failed. However, this change seems not to be the root cause for this failure. Change 105324,3 (ovirt-engine-nodejs- modules) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 105324,3 (ovirt-engine-nodejs- modules) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/105491/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/105324/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17754/

1 0

oVirt infra daily report - unstable production jobs - 1039
by jenkins＠jenkins.phx.ovirt.org 15 Dec '19

15 Dec '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/1039//artifact/exported-… Cheers, Jenkins

1 0

[CQ]: 103527, 18 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Dec '19

14 Dec '19

A system test invoked by the "ovirt-master" change queue including change 103527,18 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 105441,3 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 105441,3 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/103527/18 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/105441/3 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17747/

1 0

[CQ]: 5760b62 (ovirt-web-ui) failed "ovirt-4.3" system tests
by oVirt Jenkins 14 Dec '19

14 Dec '19

Change 5760b62 (ovirt-web-ui) is probably the reason behind recent system test failures in the "ovirt-4.3" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://github.com/oVirt/ovirt-web-ui/commit/5760b629f0a47c2568882c46a2b014… For failed test results see: http://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/2688/

1 0

oVirt infra daily report - unstable production jobs - 1038
by jenkins＠jenkins.phx.ovirt.org 14 Dec '19

14 Dec '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/1038//artifact/exported-… Cheers, Jenkins

1 0

Build failed in Jenkins: system-sync_mirrors-centos-updates-7.6-el7-x86_64 #154
by jenkins＠jenkins.phx.ovirt.org 13 Dec '19

13 Dec '19

See <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-updates-7.6-el7-x86…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <http://jenkins.ovirt.org/job/system-sync_mirrors-centos-updates-7.6-el7-x86…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision b22e8cf6cc5d637ac7049094c31be5df759b1697 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f b22e8cf6cc5d637ac7049094c31be5df759b1697 Commit message: "deploy_to_container: Support flattening images" > git rev-list --no-walk b22e8cf6cc5d637ac7049094c31be5df759b1697 # timeout=10 [system-sync_mirrors-centos-updates-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins573364781968939275.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-updates-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-updates-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-updates-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-updates-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-updates-7.6-el7 yum + local repo_name=centos-updates-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-updates-7.6-el7 /var/www/html/repos/yum/centos-updates-7.6-el7/base + check_yum_sync_needed centos-updates-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-updates-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-updates-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-updates-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-updates-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-updates-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-updates-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: Error making cache directory: /home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7 error was: [Errno 17] File exists: '/home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7' + reposync_out= Build step 'Execute shell' marked build as failure

1 1

[CQ]: 105481, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 13 Dec '19

13 Dec '19

A system test invoked by the "ovirt-master" change queue including change 105481,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 104569,2 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104569,2 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/105481/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104569/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17740/

1 0

oVirt infra daily report - unstable production jobs - 1037
by jenkins＠jenkins.phx.ovirt.org 13 Dec '19

13 Dec '19

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - http://jenkins.ovirt.org/job/system_jenkins-report/1037//artifact/exported-… Cheers, Jenkins

1 0

[CQ]: 105299, 3 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 12 Dec '19

12 Dec '19

A system test invoked by the "ovirt-master" change queue including change 105299,3 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 104569,2 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104569,2 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/105299/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104569/2 For failed test results see: http://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/17733/

1 0

[CQ]: 102662,7 (jenkins) failed "dummy-master" system tests
by oVirt Jenkins 12 Dec '19

12 Dec '19

Change 102662,7 (jenkins) is probably the reason behind recent system test failures in the "dummy-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/102662/7 For failed test results see: https://jenkins-staging.ovirt.org/job/dummy-master_change-queue-tester/457/

1 0