February 2020 - Infra - oVirt List Archives

oVirt infra daily report - unstable production jobs - 1108
by jenkins＠jenkins.phx.ovirt.org 21 Feb '20

21 Feb '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1108//artifact/exported… Cheers, Jenkins

1 0

[CQ]: 106228, 4 (ovirt-log-collector) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 21 Feb '20

21 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106228,4 (ovirt-log-collector) failed. However, this change seems not to be the root cause for this failure. Change 104922,1 (ovirt-log-collector) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104922,1 (ovirt-log-collector) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106228/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104922/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/20380/

1 0

[CQ]: 106980, 4 (ovirt-imageio) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 21 Feb '20

21 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106980,4 (ovirt-imageio) failed. However, this change seems not to be the root cause for this failure. Change 106905,1 (ovirt-imageio) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 106905,1 (ovirt-imageio) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106980/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/106905/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/20374/

1 0

[CQ]: 106966, 1 (ovirt-imageio) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 21 Feb '20

21 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106966,1 (ovirt-imageio) failed. However, this change seems not to be the root cause for this failure. Change 106905,1 (ovirt-imageio) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 106905,1 (ovirt-imageio) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106966/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/106905/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/20367/

1 0

[CQ]: 106952, 2 (ovirt-imageio) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 21 Feb '20

21 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106952,2 (ovirt-imageio) failed. However, this change seems not to be the root cause for this failure. Change 106905,1 (ovirt-imageio) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 106905,1 (ovirt-imageio) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106952/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/106905/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/20361/

1 0

[CQ]: 107007, 2 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 21 Feb '20

21 Feb '20

A system test invoked by the "ovirt-master" change queue including change 107007,2 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 104391,14 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104391,14 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107007/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104391/14 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/20355/

1 0

[CQ]: 106967, 1 (ovirt-imageio) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 21 Feb '20

21 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106967,1 (ovirt-imageio) failed. However, this change seems not to be the root cause for this failure. Change 106905,1 (ovirt-imageio) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 106905,1 (ovirt-imageio) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106967/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/106905/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/20349/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-sclo-rh-release-7.6-el7-x86_64 #362
by jenkins＠jenkins.phx.ovirt.org 21 Feb '20

21 Feb '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-7.…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-7.…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 9383b6c450886d9c8eb3a2446d23a420071fbb0b (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 9383b6c450886d9c8eb3a2446d23a420071fbb0b Commit message: "Fix the return value of update_upstream_sources" > git rev-list --no-walk 9383b6c450886d9c8eb3a2446d23a420071fbb0b # timeout=10 [system-sync_mirrors-centos-sclo-rh-release-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins857438835862638847.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-sclo-rh-release-7.6-el7 yum + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7 /var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7/base + check_yum_sync_needed centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-sclo-rh-release-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-sclo-rh-release-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: Error making cache directory: /home/jenkins/mirrors_cache/centos-updates-7.6-el7 error was: [Errno 17] File exists: '/home/jenkins/mirrors_cache/centos-updates-7.6-el7' + reposync_out= Build step 'Execute shell' marked build as failure

1 1

[CQ]: 106968, 1 (ovirt-imageio) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 21 Feb '20

21 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106968,1 (ovirt-imageio) failed. However, this change seems not to be the root cause for this failure. Change 106905,1 (ovirt-imageio) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 106905,1 (ovirt-imageio) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106968/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/106905/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/20343/

1 0

oVirt infra daily report - unstable production jobs - 1107
by jenkins＠jenkins.phx.ovirt.org 20 Feb '20

20 Feb '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1107//artifact/exported… Cheers, Jenkins

1 0