February 2020 - Infra - oVirt List Archives

[CQ]: 106904, 1 (ovirt-engine-metrics) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Feb '20

14 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106904,1 (ovirt-engine-metrics) failed. However, this change seems not to be the root cause for this failure. Change 106516,1 (ovirt-engine-metrics) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 106516,1 (ovirt-engine-metrics) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106904/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/106516/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/19967/

1 0

[CQ]: 106903, 1 (ovirt-engine-metrics) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Feb '20

14 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106903,1 (ovirt-engine-metrics) failed. However, this change seems not to be the root cause for this failure. Change 106516,1 (ovirt-engine-metrics) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 106516,1 (ovirt-engine-metrics) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106903/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/106516/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/19961/

1 0

[CQ]: 106147, 24 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Feb '20

14 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106147,24 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 104391,14 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104391,14 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106147/24 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104391/14 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/19955/

1 0

[CQ]: 106852, 4 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Feb '20

14 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106852,4 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 104391,14 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104391,14 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106852/4 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104391/14 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/19949/

1 0

[CQ]: 106809, 1 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Feb '20

14 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106809,1 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 104391,14 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104391,14 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106809/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104391/14 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/19943/

1 0

[CQ]: 106895, 2 (ovirt-dwh) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Feb '20

14 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106895,2 (ovirt-dwh) failed. However, this change seems not to be the root cause for this failure. Change 104767,4 (ovirt-dwh) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104767,4 (ovirt-dwh) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106895/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104767/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/19937/

1 0

[CQ]: 106894, 2 (ovirt-dwh) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Feb '20

14 Feb '20

A system test invoked by the "ovirt-master" change queue including change 106894,2 (ovirt-dwh) failed. However, this change seems not to be the root cause for this failure. Change 104767,4 (ovirt-dwh) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 104767,4 (ovirt-dwh) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106894/2 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/104767/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/19931/

1 0

[CQ]: 105710, 6 (vdsm) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 14 Feb '20

14 Feb '20

A system test invoked by the "ovirt-master" change queue including change 105710,6 (vdsm) failed. However, this change seems not to be the root cause for this failure. Change 106280,6 (vdsm) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 106280,6 (vdsm) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/105710/6 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/106280/6 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/19925/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-sclo-rh-release-7.6-el7-x86_64 #341
by jenkins＠jenkins.phx.ovirt.org 14 Feb '20

14 Feb '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-7.…> Changes: [Barak Korren] usrc.py: Be better at importing `pusher.py` ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-7.…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 4990081c68ad58910bf61d71e985139965b52a7c (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 4990081c68ad58910bf61d71e985139965b52a7c Commit message: "usrc.py: Be better at importing `pusher.py`" > git rev-list --no-walk f728577d091518eeb247a75a35ea3bec36c064d9 # timeout=10 [system-sync_mirrors-centos-sclo-rh-release-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins2079537812303727495.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-sclo-rh-release-7.6-el7 yum + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7 /var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7/base + check_yum_sync_needed centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-sclo-rh-release-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-sclo-rh-release-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: failure: repodata/be198d32d786c933beb06e141f7f49d7b9671df70ecb09f05c39370d498a5f57-primary.sqlite.bz2 from centos-sclo-rh-release-7.6-el7: [Errno 256] No more mirrors to try. http://vault.centos.org/7.6.1810/sclo/x86_64/rh/repodata/be198d32d786c933be…: [Errno 16] error setting timestamp on file /home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7/be198d32d786c933beb06e141f7f49d7b9671df70ecb09f05c39370d498a5f57-primary.sqlite.bz2 from http://vault.centos.org/7.6.1810/sclo/x86_64/rh/repodata/be198d32d786c933be…, OSError: [Errno 2] No such file or directory: '/home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7/be198d32d786c933beb06e141f7f49d7b9671df70ecb09f05c39370d498a5f57-primary.sqlite.bz2' + reposync_out= Build step 'Execute shell' marked build as failure

1 1

[oVirt Jenkins] cleanup-gated-ovirt-4.3 - Build #56 - FAILURE!
by jenkins＠jenkins.phx.ovirt.org 14 Feb '20

14 Feb '20

Build: https://jenkins.ovirt.org/job/cleanup-gated-ovirt-4.3/56/ Build Name: #56 Build Status: FAILURE Gerrit change: null - title: null - project: null - branch: null - author: null <null>

1 0