October 2021 - Infra - oVirt List Archives

[CQ]: 117280, 1 (ovirt-engine-api-metamodel) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 25 Oct '21

25 Oct '21

A system test invoked by the "ovirt-master" change queue including change 117280,1 (ovirt-engine-api-metamodel) failed. However, this change seems not to be the root cause for this failure. Change 111144,2 (ovirt-engine-api- metamodel) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 111144,2 (ovirt-engine-api- metamodel) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/c/ovirt-engine-api-metamodel/+/#/c/117280/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/111144/2 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/32210/

1 0

[CQ]: 117279, 1 (ovirt-engine-api-metamodel) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 25 Oct '21

25 Oct '21

A system test invoked by the "ovirt-master" change queue including change 117279,1 (ovirt-engine-api-metamodel) failed. However, this change seems not to be the root cause for this failure. Change 111144,2 (ovirt-engine-api- metamodel) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 111144,2 (ovirt-engine-api- metamodel) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/c/ovirt-engine-api-metamodel/+/#/c/117279/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/111144/2 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/32209/

1 0

[CQ]: 117278, 1 (ovirt-engine-api-metamodel) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 25 Oct '21

25 Oct '21

A system test invoked by the "ovirt-master" change queue including change 117278,1 (ovirt-engine-api-metamodel) failed. However, this change seems not to be the root cause for this failure. Change 111144,2 (ovirt-engine-api- metamodel) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 111144,2 (ovirt-engine-api- metamodel) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/c/ovirt-engine-api-metamodel/+/#/c/117278/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/111144/2 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/32208/

1 0

Build failed in Jenkins: system-sync_mirrors-epel-el7-x86_64 #5233
by jenkins＠jenkins.phx.ovirt.org 25 Oct '21

25 Oct '21

See <https://jenkins.ovirt.org/job/system-sync_mirrors-epel-el7-x86_64/5233/disp…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-epel-el7-x86_64/ws/> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.ovirt.org/job/system-sync_mirrors-epel-el7-x86_64/ws/jenkin…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git --version # 'git version 1.8.3.1' > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* # timeout=10 > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 9f431eab59411915b18bfb82c0ec14caeed95df7 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 9f431eab59411915b18bfb82c0ec14caeed95df7 # timeout=10 Commit message: "Copy logs of el8stream runs to log server" > git rev-list --no-walk 9f431eab59411915b18bfb82c0ec14caeed95df7 # timeout=10 [system-sync_mirrors-epel-el7-x86_64] $ /bin/bash -xe /tmp/jenkins3194780107818036201.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror epel-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + YUM_PATH=/yum/ + MIRRORS_BASE_PREFIX=/var/www/html/repos/yum/ + REPOQUERY_HTTP_BASE=http://mirrors.phx.ovirt.org/repos/yum/ + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + MAX_AGE=14 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror epel-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror epel-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=epel-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs epel-el7 yum + local repo_name=epel-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/epel-el7 /var/www/html/repos/yum/epel-el7/base + modify_reposync_conf epel-el7 jenkins/data/mirrors-reposync.conf + local repo_name=epel-el7 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local tmp_file=reposync.tmp + awk -v RS= -v 'ORS=\n\n' /main/ jenkins/data/mirrors-reposync.conf + awk -v RS= -v 'ORS=\n\n' /epel-el7/ jenkins/data/mirrors-reposync.conf + mv reposync.tmp jenkins/data/mirrors-reposync.conf + check_yum_sync_needed epel-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=epel-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/epel-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync epel-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=epel-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=epel-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/epel-el7/base --norepopath --urls --quiet Error setting up repositories: Cannot retrieve metalink for repository: epel-el7. Please verify its path and try again + reposync_out= Build step 'Execute shell' marked build as failure

1 1

oVirt infra daily report - unstable production jobs - 1719
by jenkins＠jenkins.phx.ovirt.org 25 Oct '21

25 Oct '21

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1719//artifact/exported… Cheers, Jenkins

1 0

oVirt infra daily report - unstable production jobs - 1718
by jenkins＠jenkins.phx.ovirt.org 24 Oct '21

24 Oct '21

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1718//artifact/exported… Cheers, Jenkins

1 0

oVirt infra daily report - unstable production jobs - 1717
by jenkins＠jenkins.phx.ovirt.org 23 Oct '21

23 Oct '21

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1717//artifact/exported… Cheers, Jenkins

1 0

oVirt infra daily report - unstable production jobs - 1716
by jenkins＠jenkins.phx.ovirt.org 22 Oct '21

22 Oct '21

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1716//artifact/exported… Cheers, Jenkins

1 0

[CQ]: 117245,1 (ovirt-setup-lib) failed "ovirt-master" system tests
by oVirt Jenkins 21 Oct '21

21 Oct '21

Change 117245,1 (ovirt-setup-lib) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/c/ovirt-setup-lib/+/#/c/117245/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/32193/

1 0

[CQ]: 117242, 1 (ovirt-host) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 21 Oct '21

21 Oct '21

A system test invoked by the "ovirt-master" change queue including change 117242,1 (ovirt-host) failed. However, this change seems not to be the root cause for this failure. Change 117233,3 (ovirt-host) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 117233,3 (ovirt-host) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/c/ovirt-host/+/#/c/117242/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/c/ovirt-host/+/#/c/117233/3 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/32189/

1 0