- Infra - oVirt List Archives

[CQ]: 107792, 1 (cockpit-ovirt) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 28 Mar '20

28 Mar '20

A system test invoked by the "ovirt-master" change queue including change 107792,1 (cockpit-ovirt) failed. However, this change seems not to be the root cause for this failure. Change 107734,1 (cockpit-ovirt) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107734,1 (cockpit-ovirt) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107792/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107734/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21719/

1 0

[CQ]: 107495, 11 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 28 Mar '20

28 Mar '20

A system test invoked by the "ovirt-master" change queue including change 107495,11 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 107696,2 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107696,2 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107495/11 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107696/2 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21711/

1 0

[CQ]: 107770, 3 (ovirt-system-tests) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 28 Mar '20

28 Mar '20

A system test invoked by the "ovirt-master" change queue including change 107770,3 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 107439,4 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107439,4 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107770/3 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107439/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21703/

1 0

[CQ]: 107789, 1 (java-client-kubevirt) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 28 Mar '20

28 Mar '20

A system test invoked by the "ovirt-master" change queue including change 107789,1 (java-client-kubevirt) failed. However, this change seems not to be the root cause for this failure. Change 107781,1 (java-client-kubevirt) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107781,1 (java-client-kubevirt) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/107789/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107781/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21695/

1 0

Build failed in Jenkins: system-sync_mirrors-centos-sclo-rh-release-7.6-el7-x86_64 #470
by jenkins＠jenkins.phx.ovirt.org 28 Mar '20

28 Mar '20

See <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-7.…> Changes: ------------------------------------------ Started by timer Running as SYSTEM [EnvInject] - Loading node environment variables. Building remotely on mirrors.phx.ovirt.org (mirrors) in workspace <https://jenkins.ovirt.org/job/system-sync_mirrors-centos-sclo-rh-release-7.…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url http://gerrit.ovirt.org/jenkins.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Pruning obsolete local branches Fetching upstream changes from http://gerrit.ovirt.org/jenkins.git > git --version # timeout=10 > git fetch --tags --progress --prune http://gerrit.ovirt.org/jenkins.git +refs/heads/*:refs/remotes/origin/* > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 97b81245acf3b2c8271a2d5321717353d6350c3d (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 97b81245acf3b2c8271a2d5321717353d6350c3d Commit message: "virt sig: move repos to buildlogs" > git rev-list --no-walk 97b81245acf3b2c8271a2d5321717353d6350c3d # timeout=10 [system-sync_mirrors-centos-sclo-rh-release-7.6-el7-x86_64] $ /bin/bash -xe /tmp/jenkins1153622881923280837.sh + jenkins/scripts/mirror_mgr.sh resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + MIRRORS_MP_BASE=/var/www/html/repos + MIRRORS_HTTP_BASE=http://mirrors.phx.ovirt.org/repos + MIRRORS_CACHE=/home/jenkins/mirrors_cache + MAX_LOCK_ATTEMPTS=120 + LOCK_WAIT_INTERVAL=5 + LOCK_BASE=/home/jenkins + OLD_MD_TO_KEEP=100 + HTTP_SELINUX_TYPE=httpd_sys_content_t + HTTP_FILE_MODE=644 + main resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local command=resync_yum_mirror + command_args=("${@:2}") + local command_args + cmd_resync_yum_mirror centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local sync_needed + mkdir -p /home/jenkins/mirrors_cache + verify_repo_fs centos-sclo-rh-release-7.6-el7 yum + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_type=yum + sudo install -o jenkins -d /var/www/html/repos/yum /var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7 /var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7/base + check_yum_sync_needed centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf sync_needed + local repo_name=centos-sclo-rh-release-7.6-el7 + local repo_archs=x86_64 + local reposync_conf=jenkins/data/mirrors-reposync.conf + local p_sync_needed=sync_needed + local reposync_out + echo 'Checking if mirror needs a resync' Checking if mirror needs a resync + rm -rf /home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7 ++ IFS=, ++ echo x86_64 + for arch in '$(IFS=,; echo $repo_archs)' ++ run_reposync centos-sclo-rh-release-7.6-el7 x86_64 jenkins/data/mirrors-reposync.conf --urls --quiet ++ local repo_name=centos-sclo-rh-release-7.6-el7 ++ local repo_arch=x86_64 ++ local reposync_conf=jenkins/data/mirrors-reposync.conf ++ extra_args=("${@:4}") ++ local extra_args ++ reposync --config=jenkins/data/mirrors-reposync.conf --repoid=centos-sclo-rh-release-7.6-el7 --arch=x86_64 --cachedir=/home/jenkins/mirrors_cache --download_path=/var/www/html/repos/yum/centos-sclo-rh-release-7.6-el7/base --norepopath --newest-only --urls --quiet Error setting up repositories: Error making cache directory: /home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7 error was: [Errno 17] File exists: '/home/jenkins/mirrors_cache/centos-sclo-rh-release-7.6-el7' + reposync_out= Build step 'Execute shell' marked build as failure

1 1

[CQ]: 106148, 19 (ovirt-engine) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 27 Mar '20

27 Mar '20

A system test invoked by the "ovirt-master" change queue including change 106148,19 (ovirt-engine) failed. However, this change seems not to be the root cause for this failure. Change 107696,2 (ovirt-engine) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107696,2 (ovirt-engine) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/106148/19 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107696/2 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21687/

1 0

[CQ]: 107439, 4 (ovirt-system-tests) failed "ovirt-master" system tests
by oVirt Jenkins 27 Mar '20

27 Mar '20

Change 107439,4 (ovirt-system-tests) is probably the reason behind recent system test failures in the "ovirt-master" change queue and needs to be fixed. This change had been removed from the testing queue. Artifacts build from this change will not be released until it is fixed. For further details about the change see: https://gerrit.ovirt.org/#/c/107439/4 For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21678/

1 0

oVirt infra daily report - unstable production jobs - 1143
by jenkins＠jenkins.phx.ovirt.org 27 Mar '20

27 Mar '20

Good morning! Attached is the HTML page with the jenkins status report. You can see it also here: - https://jenkins.ovirt.org/job/system_jenkins-report/1143//artifact/exported… Cheers, Jenkins

1 0

[CQ]: 9c532ee (ovirt-ansible-image-template) failed "ovirt-master" system tests, but isn't the failure root cause
by oVirt Jenkins 27 Mar '20

27 Mar '20

A system test invoked by the "ovirt-master" change queue including change 9c532ee (ovirt-ansible-image-template) failed. However, this change seems not to be the root cause for this failure. Change 40762ed (ovirt-ansible-image- template) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 40762ed (ovirt-ansible-image- template) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://github.com/oVirt/ovirt-ansible-image-template/commit/9c532eea3cba89… For further details about the change that seems to be the root cause behind the testing failures see: https://github.com/oVirt/ovirt-ansible-image-template/commit/40762edfd74f73… For failed test results see: https://jenkins.ovirt.org/job/ovirt-master_change-queue-tester/21671/

1 0

[CQ]: 108014, 1 (ovirt-system-tests) failed "ovirt-4.3" system tests, but isn't the failure root cause
by oVirt Jenkins 27 Mar '20

27 Mar '20

A system test invoked by the "ovirt-4.3" change queue including change 108014,1 (ovirt-system-tests) failed. However, this change seems not to be the root cause for this failure. Change 107900,1 (ovirt-system-tests) that this change depends on or is based on, was detected as the cause of the testing failures. This change had been removed from the testing queue. Artifacts built from this change will not be released until either change 107900,1 (ovirt-system-tests) is fixed and this change is updated to refer to or rebased on the fixed version, or this change is modified to no longer depend on it. For further details about the change see: https://gerrit.ovirt.org/#/c/108014/1 For further details about the change that seems to be the root cause behind the testing failures see: https://gerrit.ovirt.org/#/c/107900/1 For failed test results see: https://jenkins.ovirt.org/job/ovirt-4.3_change-queue-tester/3186/

1 0