Hosted engine datastore crashed on adding a new datastore
by Klas Mattsson
Hello all,
For some reason, when I try to add a second datastore (separate IP and
empty share with 36:36 user rights), the share which has got the
hosted-engine on it crashes.
This of course crashes the hosted engine.
When the share is up again, it's not sufficient to create a directory
/rhev/data-center/mnt/ with identical name as before and mounting the
share there.
The hosted-engine still refuses to boot up.
The load (pure I/O) on the NFS server goes up to about 11 as well.
Any ideas on where I should check?
10 years, 7 months
Storage domain - defining fields
by Gabi C
Hello!
My setup 1 engine Fedora 19 ovirt 3.4 managing 3 nodes Fedora 19 + ovirt
3.4 updated; those nodes acts also as gluster server for 2 storage domains,
each domain 3 bricks replicated ( so 3 bricks each).
I have one questions regarding the fields one have to complete when
defining a new storage domain and its importance.
First, field "*Use Host*" - you have to complete with one of the nodes. Of
course you can use any of the host in cluster, *but which is its
significance/importance*? * If you reboot that node, you suppose to have
any issue with the storage?*
The same question with field "*Path*" - gluster case - "*Path to gluster
volume to mount*" formatted as "HOST:VOLUME" , where host can be the same
as above mentioned field- "*Use Host*" or any af the gluster cluster
member; *which is its significance/importance?*
*Again If you reboot that node, you suppose to have any issue with the
storage?*
My experience with rebooting these nodes*, *after moving VM's and putting
it in Maintenance was good*,* until yesterday, when after such reboot I've
got some corrupted VM images, and subsequently I had to restore them.
Error message follows :
Exit message: cannot read header
'/rhev/data-center/mnt/glusterSD/10.125.1.194:gluster__data3/5fe658b1-43ff-4bfd-97d6-28217cf415df/images/321ad473-3741-4825-8ac0-6c416aa8f490/1a21454d-9931-4ed8-ba38-7126528664a1':
Input/output error."
Did I miss some step(s), beside moving VM's and puting node in maintenace,
before reboot one host node, servig also as gluster node?
Any hint, link would be appreciated!
Thanks!
10 years, 7 months
Problem deploying host
by Juan Jose
Hello everybody,
I'm trying to add a new host to my oVirt infrastructure and in the process
of installing host I receive the errors:
Host host3 installation failed. Command returned failure code 1 during SSH
session 'root(a)ovirt-host3.siee.local'
My host is a CentOS release 6.5 (Final) and the installation log file
/var/log/ovirt-engine/host-deploy/ovirt-20140425105003-ovirt-host3.siee.local-b98f5fc.log
says:
2014-04-25 10:52:41 INFO otopi.plugins.ovirt_host_deploy.vdsm.hardware
hardware._validate_virtualization:71 Hardware supports virtualization
2014-04-25 10:52:41 DEBUG otopi.context context._executeMethod:123 Stage
validation METHOD
otopi.plugins.ovirt_host_deploy.vdsm.packages.Plugin._validation
Loading mirror speeds from cached hostfile
* base: ftp.cica.es
* epel: ftp.cica.es
* extras: ftp.cica.es
* updates: ftp.cica.es
2014-04-25 10:52:41 DEBUG otopi.context context._executeMethod:137 method
exception
Traceback (most recent call last):
File "/tmp/ovirt-FbkNK3vQrX/pythonlib/otopi/context.py", line 127, in
_executeMethod
method['method']()
File
"/tmp/ovirt-FbkNK3vQrX/otopi-plugins/ovirt-host-deploy/vdsm/packages.py",
line 75, in _validation
'Cannot locate vdsm package, '
RuntimeError: Cannot locate vdsm package, possible cause is incorrect
channels
2014-04-25 10:52:41 ERROR otopi.context context._executeMethod:146 Failed
to execute stage 'Setup validation': Cannot locate vdsm package, possible
cause is incorrect channels
I'm attaching the installation log file. Could Anybody gives me some
indication about this problem?
Thank you very much in avanced,
Juanjo.
10 years, 7 months
Foreman not starting VM, hangs on finishing creating a new VM
by Matt .
Hi All,
I'm having an issue with oVirt 3.4 and Foreman 1.5 RC1 at the moment, it
does not start/finish a new provisioned VM/Host., it creates it well on
oVirt.
I'm sure this worked well on a nightly some dags ago and I didn't update it
after it.
The foreman bug is shown here: http://projects.theforeman.org/issues/5132
What I also see in the engine log is a bunch of admin login errors which I
cannot place anywhere:
2014-04-23 20:26:44,203 INFO [org.ovirt.engine.core.bll.LoginUserCommand]
(ajp--127.0.0.1-8702-6) Running command: LoginUserCommand internal: false.
2014-04-23 20:26:44,242 INFO [org.ovirt.engine.core.bll.LogoutUserCommand]
(ajp--127.0.0.1-8702-6) [2e4a8183] Running command: LogoutUserCommand
internal: false.
2014-04-23 20:26:44,276 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ajp--127.0.0.1-8702-6) [2e4a8183] Correlation ID: 2e4a8183, Call Stack:
null, Custom Event ID: -1, Message: User admin logged out.
2014-04-23 20:26:44,470 INFO [org.ovirt.engine.core.bll.LoginUserCommand]
(ajp--127.0.0.1-8702-1) Running command: LoginUserCommand internal: false.
2014-04-23 20:26:44,510 INFO [org.ovirt.engine.core.bll.LogoutUserCommand]
(ajp--127.0.0.1-8702-1) [5d731a43] Running command: LogoutUserCommand
internal: false.
2014-04-23 20:26:44,542 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ajp--127.0.0.1-8702-1) [5d731a43] Correlation ID: 5d731a43, Call Stack:
null, Custom Event ID: -1, Message: User admin logged out.
2014-04-23 20:26:44,575 INFO [org.ovirt.engine.core.bll.LoginUserCommand]
(ajp--127.0.0.1-8702-3) Running command: LoginUserCommand internal: false.
2014-04-23 20:26:44,623 INFO [org.ovirt.engine.core.bll.RemoveVmCommand]
(ajp--127.0.0.1-8702-3) [708f0b9a] Lock Acquired to object EngineLock
[exclusiveLocks= key: 7bfc175c-dbcd-43c9-9549-cde8d3b3b731 value: VM
I get the feeling this has something todo with eachother.
Any idea here ?
Thanks!
Matt
10 years, 7 months
[Users] VM used FUSE mount point, are not used qemu-GlusterFS native integration
by Андрей Брагин
Hi, all
I created DC, use GlusterFS as the domain type.
And created Storage, with storage type "Data/GlusterFS"
But VM used FUSE mount point, are not used qemu-glusterfs native integration
When i looked at the running KVM processes, i saw
-drive file=/rhev/data-center/mnt/
glusterSD/vdsm01.cn.local:
local/35c541ad-bd48-4000-ad8f-8539629b7d75/images/9f3ecc5d-5d82-4e83-a89e-b298725e1d63/6a621ecc-715d-4a15-982c-05c618eefd36
But I expect to see
-drive file=gluster+tcp://
Fodora 19
oVirt 3.3.4
libvirt 1.0.5
qemu-kvm 1.4.2
10 years, 7 months
Spurious error message when the RHEV capacity is maxed out?
by Satya Vempati
--_000_CF7D45AF5E0Esvempatitintricom_
Content-Type: text/plain; charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
We have about 900 vms in a RHEV-M 3.3 installation (3.3.2-0.50.el6ev) with =
three hosts.
Each VM has 1 socket, 1 core for CPU and 256 MB memory and 2 x 1TB disks + =
one 5 GB boot disk.
Each host has 2 cpu sockets with 4 cpu cores per socket.
When we power on about 250 of these vms, we cannot power on any more vms.
Attempting to do so gets the error (in the RHEV-M) console.
Bad volume specification {'index': 0, 'iface': 'virtio', 'reqsize': '0', 'f=
ormat': 'raw', 'bootOrder': '1', 'volumeID': '14aa7302-7f6d-4b80-922d-3fc09=
0695447', 'apparentsize': '5368709120', 'imageID': '97b1985e-e507-4927-91e9=
-7393c7777de5', 'specParams': {}, 'readonly': 'false', 'domainID': '0c7abcc=
c-1b97-4b39-ab96-e977a19fac3a', 'optional': 'false', 'deviceId': '97b1985e-=
e507-4927-91e9-7393c7777de5', 'truesize': '0', 'poolID': '5849b030-626e-47c=
b-ad90-3ce782d831b3', 'device': 'disk', 'shared': 'false', 'propagateErrors=
': 'off', 'type': 'disk'}.
This looks like a spurious error, as we can power on the same VM after rebo=
oting the hosts.
And also, the hosts do not really look maxed out (CPU usage is around 25%, =
memory around 50%), but no more vm=92s can be powered on.
I was looking for a sizing guide, and found only https://access.redhat.com/=
site/sites/default/files/attachments/rhev_sizing_0812.pdf
Is there any other information available?
--_000_CF7D45AF5E0Esvempatitintricom_
Content-Type: text/html; charset="Windows-1252"
Content-ID: <43C5516411658D4E88AF942223A80EF2@internal>
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1=
252">
</head>
<body style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-lin=
e-break: after-white-space; color: rgb(0, 0, 0); font-size: 14px; font-fami=
ly: Calibri, sans-serif;">
<div>We have about 900 vms in a RHEV-M 3.3 installation (<span style=3D"col=
or: rgb(17, 17, 17); font-family: Verdana; line-height: 24px;">3.3.2-0.50.e=
l6ev) </span>with three hosts.</div>
<div><br>
</div>
<div>Each VM has 1 socket, 1 core for CPU and 256 MB memory and 2 x 1TB dis=
ks + one 5 GB boot disk.</div>
<div><br>
</div>
<div>Each host has 2 cpu sockets with 4 cpu cores per socket.</div>
<div><br>
</div>
<div>When we power on about 250 of these vms, we cannot power on any more v=
ms.</div>
<div><br>
</div>
<div>Attempting to do so gets the error (in the RHEV-M) console.</div>
<div><br>
</div>
<div>
<div>Bad volume specification {'index': 0, 'iface': 'virtio', 'reqsize': '0=
', 'format': 'raw', 'bootOrder': '1', 'volumeID': '14aa7302-7f6d-4b80-922d-=
3fc090695447', 'apparentsize': '5368709120', 'imageID': '97b1985e-e507-4927=
-91e9-7393c7777de5', 'specParams':
{}, 'readonly': 'false', 'domainID': '0c7abccc-1b97-4b39-ab96-e977a19fac3a=
', 'optional': 'false', 'deviceId': '97b1985e-e507-4927-91e9-7393c7777de5',=
'truesize': '0', 'poolID': '5849b030-626e-47cb-ad90-3ce782d831b3', 'device=
': 'disk', 'shared': 'false', 'propagateErrors':
'off', 'type': 'disk'}.</div>
</div>
<div><br>
</div>
<div>This looks like a spurious error, as we can power on the same VM after=
rebooting the hosts.</div>
<div><br>
</div>
<div>And also, the hosts do not really look maxed out (CPU usage is around =
25%, memory around 50%), but no more vm=92s can be powered on. </div>
<div><br>
</div>
<div>I was looking for a sizing guide, and found only <a href=3D"https=
://access.redhat.com/site/sites/default/files/attachments/rhev_sizing_0812.=
pdf" style=3D"font-size: medium; color: rgb(102, 51, 102);">https://access.=
redhat.com/site/sites/default/files/attachments/rhev_sizing_0812.pdf</a></d=
iv>
<div><br>
</div>
<div>Is there any other information available?</div>
<br>
</body>
</html>
--_000_CF7D45AF5E0Esvempatitintricom_--
10 years, 7 months
configuration maximus
by Ovirt User
Hello,
1) how many Vm per node are supported ?
2) how many virtual CPU per node are supported ?
i don't find configuration maximus ..
thanks
Lukas
10 years, 7 months
Unable to move disk to another data domain
by Yusufi M R
--_000_58778a998fcc49299998eac45c7565abBY2PR07MB187namprd07pro_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hi All,
I am trying to move the disk of VM from Data Domain(Master) to another data=
domain in the same cluster, but I get the warning as " some of the disk ca=
nnot be moved" and I cannot see the list of other data domain in the selec=
tion window.
Can someone help here ?
Regards,
Yusuf
--_000_58778a998fcc49299998eac45c7565abBY2PR07MB187namprd07pro_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:=
//www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
>
<meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri","sans-serif";}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72">
<div class=3D"WordSection1">
<p class=3D"MsoNormal">Hi All,<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">I am trying to move the disk of VM from Data Domain(=
Master) to another data domain in the same cluster, but I get the warning a=
s “ some of the disk cannot be moved” and I cannot see th=
e list of other data domain in the selection window.<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">Can someone help here ?<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal">Regards,<o:p></o:p></p>
<p class=3D"MsoNormal">Yusuf<o:p></o:p></p>
</div>
</body>
</html>
--_000_58778a998fcc49299998eac45c7565abBY2PR07MB187namprd07pro_--
10 years, 7 months
qemu-kvm-rhev for el6
by Amedeo Salvati
hello,
does anyone know if there are an existent bugzilla to track the release
of qemu-kvm-rhev rpms under el (like centos)?
Because I've looked at bugzilla and google docs oVirt Planning &
Tracking with no luck
best regards
a
10 years, 7 months
