lost connection to hosted engine
by Artem Tambovskiy
Hi,
Just run into the issue during cluster upgrade from 4.24 to 4.2.6.1. I'm
running small cluster with 2 hosts and gluster storage. Once I upgraded one
of the hosts to 4.2.6.1 something went wrong (looks like it tried to start
HE instance) and I can't connect to hosted-engine any longer.
As I can see HostedEngine is still running on the second host (and another
yet 7 VM's) , but I can't stop it.
ovirt-ha-agent and ovirt-ha-broker are failing to start. hosted-engine
--vm-status gives nothing but error message
"The hosted engine configuration has not been retrieved from shared
storage. Please ensure that ovirt-ha-agent is running and the storage
server is reachable."
ps -ef shows plenty of vdsm processes in defunc state thats probably the
reason why agent and brocker can't start. Just wondering that is the good
way to start problem resolution here to minimize downtime for running VM's?
Restart vdsm and try again restarting agent and broker or just reboot the
whole host?
Regards,
Artem
6 years, 1 month
hosted-engine --deploy erorr
by mustafa.taha.mu95＠gmail.com
i configuer ovirt-self host and then i clear it by this command :
/usr/sbin/ovirt-hosted-engine-cleanup
then i want to re-deploy the selfhost by this error appear :
[root@ovirtnode44 ~]# hosted-engine --deploy
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
During customization use CTRL-D to abort.
Continuing will configure this host for serving as hypervisor and create a local VM with a running engine.
The locally running engine will be used to configure a storage domain and create a VM there.
At the end the disk of the local VM will be moved to the shared storage.
Are you sure you want to continue? (Yes, No)[Yes]:
It has been detected that this program is executed through an SSH connection without using screen.
Continuing with the installation may lead to broken installation if the network connection fails.
It is highly recommended to abort the installation and run it inside a screen session using command "screen".
Do you want to continue anyway? (Yes, No)[No]: yes
Configuration files: []
Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20181004025609-bzthh6.log
Version: otopi-1.7.8 (otopi-1.7.8-1.el7)
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Stage: Environment customization
--== STORAGE CONFIGURATION ==--
--== HOST NETWORK CONFIGURATION ==--
[ INFO ] Bridge ovirtmgmt already created
Please indicate a pingable gateway IP address [192.168.3.2]:
[ INFO ] TASK [Gathering Facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Detecting interface on existing management bridge]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Get all active network interfaces]
[ INFO ] TASK [Filter bonds with bad naming]
[ INFO ] TASK [Generate output list]
[ INFO ] ok: [localhost]
Please indicate a nic to set ovirtmgmt bridge on: (enp24s0f0) [enp24s0f0]:
--== VM CONFIGURATION ==--
If you want to deploy with a custom engine appliance image,
please specify the path to the OVA archive you would like to use
(leave it empty to skip, the setup will use ovirt-engine-appliance rpm installing it if missing):
[ INFO ] Detecting host timezone.
Please provide the FQDN you would like to use for the engine appliance.
Note: This will be the FQDN of the engine VM you are now going to launch,
it should not point to the base host or to any other existing machine.
Engine VM FQDN: []: ovirtengine.exalt.ps
Please provide the domain name you would like to use for the engine appliance.
Engine VM domain: [exalt.ps]
Enter root password that will be used for the engine appliance:
Confirm appliance root password:
Enter ssh public key for the root user that will be used for the engine appliance (leave it empty to skip):
[WARNING] Skipping appliance root ssh public key
Do you want to enable ssh access for the root user (yes, no, without-password) [yes]:
Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF value): [4]:
Please specify the memory size of the VM in MB (Defaults to appliance OVF value): [16384]:
You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:03:a8:09]:
How should the engine VM network be configured (DHCP, Static)[DHCP]? Static
Please enter the IP address to be used for the engine VM [192.168.0.1]: 192.168.200.45
[ INFO ] The engine VM will be configured to use 192.168.200.45/16
Please provide a comma-separated list (max 3) of IP addresses of domain name servers for the engine VM
Engine VM DNS (leave it empty to skip) [192.168.200.6]:
Add lines for the appliance itself and for this host to /etc/hosts on the engine VM?
Note: ensuring that this host could resolve the engine VM hostname is still up to you
(Yes, No)[No]
--== HOSTED ENGINE CONFIGURATION ==--
Please provide the name of the SMTP server through which we will send notifications [localhost]:
Please provide the TCP port number of the SMTP server [25]:
Please provide the email address from which notifications will be sent [root@localhost]:
Please provide a comma-separated list of email addresses which will get notifications [root@localhost]:
Enter engine admin password:
Confirm engine admin password:
[ INFO ] Stage: Setup validation
[ INFO ] Stage: Transaction setup
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Transaction commit
[ INFO ] Stage: Closing up
[ INFO ] Cleaning previous attempts
[ INFO ] TASK [Gathering Facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Stop libvirt service]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Drop vdsm config statements]
[ INFO ] TASK [Restore initial abrt config files]
[ INFO ] TASK [Restart abrtd service]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Drop libvirt sasl2 configuration by vdsm]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Stop and disable services]
[ INFO ] TASK [Start libvirt]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Check for leftover local Hosted Engine VM]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Destroy leftover local Hosted Engine VM]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Check for leftover defined local Hosted Engine VM]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Undefine leftover local engine VM]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Check for leftover defined Hosted Engine VM]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Undefine leftover engine VM]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Remove eventually entries for the local VM from known_hosts file]
[ INFO ] changed: [localhost]
[ INFO ] Starting local VM
[ INFO ] TASK [Gathering Facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Start libvirt]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Activate default libvirt network]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Get libvirt interfaces]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Get routing rules]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Save bridge name]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Wait for the bridge to appear on the host]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Refresh network facts]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Prepare CIDR for virbr0]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Add outbound route rules]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Add inbound route rules]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Gathering Facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Avoid localhost]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Get host address resolution]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Check address resolution]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Parse host address resolution]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Ensure host address resolves locally]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Get target address from selected interface]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Check the resolved address resolves on the selected interface]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Check for alias]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Ensure the resolved address resolves only on the selected interface]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Avoid localhost]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Get engine FQDN resolution]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Check engine FQDN resolution]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Parse engine FQDN resolution]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Ensure engine FQDN doesn't resolve locally]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Check http/https proxy]
[ INFO ] TASK [Register the engine FQDN as a host]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Create directory for local VM]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Set local vm dir path]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Fix local VM directory permission]
[ INFO ] changed: [localhost]
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Install ovirt-engine-appliance rpm]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Parse appliance configuration for path]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Parse appliance configuration for sha1sum]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Get OVA path]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Compute sha1sum]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Compare sha1sum]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Register appliance PATH]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Extract appliance to local VM directory]
[ INFO ] changed: [localhost]
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Find the local appliance image]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Set local_vm_disk_path]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Get appliance disk size]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Parse qemu-img output]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Create cloud init user-data and meta-data files]
[ INFO ] TASK [Create ISO disk]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Create local VM]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Get local VM IP]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Remove eventually entries for the local VM from /etc/hosts]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Create an entry in /etc/hosts for the local VM]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Wait for SSH to restart on the local VM]
[ INFO ] ok: [localhost -> localhost]
[ INFO ] TASK [Gathering Facts]
[ INFO ] ok: [ovirtengine.exalt.ps]
[ INFO ] TASK [Wait for the local VM]
[ INFO ] ok: [ovirtengine.exalt.ps]
[ INFO ] TASK [Add an entry for this host on /etc/hosts on the local VM]
[ INFO ] changed: [ovirtengine.exalt.ps]
[ INFO ] TASK [Set FQDN]
[ INFO ] changed: [ovirtengine.exalt.ps]
[ INFO ] TASK [Force the local VM FQDN to temporary resolve on the natted network address]
[ INFO ] changed: [ovirtengine.exalt.ps]
[ INFO ] TASK [Restore sshd reverse DNS lookups]
[ INFO ] changed: [ovirtengine.exalt.ps]
[ INFO ] TASK [Generate an answer file for engine-setup]
[ INFO ] changed: [ovirtengine.exalt.ps]
[ INFO ] TASK [Include before engine-setup custom tasks files for the engine VM]
[ INFO ] TASK [Execute engine-setup]
[ INFO ] changed: [ovirtengine.exalt.ps]
[ INFO ] TASK [Include after engine-setup custom tasks files for the engine VM]
[ INFO ] TASK [Configure LibgfApi support]
[ INFO ] skipping: [ovirtengine.exalt.ps]
[ INFO ] TASK [Restart ovirt-engine service for LibgfApi support]
[ INFO ] skipping: [ovirtengine.exalt.ps]
[ INFO ] TASK [Mask cloud-init services to speed up future boot]
[ INFO ] TASK [Clean up bootstrap answer file]
[ INFO ] changed: [ovirtengine.exalt.ps]
[ INFO ] TASK [Gathering Facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Wait for ovirt-engine service to start]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Detect VLAN ID]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Set Engine public key as authorized key without validating the TLS/SSL certificates]
[ INFO ] changed: [localhost]
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Obtain SSO token using username/password credentials]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Enable GlusterFS at cluster level]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Set VLAN ID at datacenter level]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Force host-deploy in offline mode]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Add host]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Wait for the host to be up]
[ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_hosts": []}, "attempts": 120, "changed": false}
[ INFO ] TASK [Fetch logs from the engine VM]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Set destination directory path]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Create destination directory]
[ INFO ] changed: [localhost]
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Find the local appliance image]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Set local_vm_disk_path]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Give the vm time to flush dirty buffers]
[ INFO ] TASK [Copy engine logs]
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Remove local vm dir]
[ INFO ] changed: [localhost]
[ INFO ] TASK [Notify the user about a failure]
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"}
[ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook
[ INFO ] Stage: Clean up
[ INFO ] Cleaning temporary resources
[ INFO ] TASK [Gathering Facts]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Fetch logs from the engine VM]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Set destination directory path]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Create destination directory]
[ INFO ] changed: [localhost]
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Find the local appliance image]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Set local_vm_disk_path]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [Give the vm time to flush dirty buffers]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Copy engine logs]
[ INFO ] TASK [include_tasks]
[ INFO ] ok: [localhost]
[ INFO ] TASK [Remove local vm dir]
[ INFO ] ok: [localhost]
[ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20181004031555.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch.
Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20181004025609-bzthh6.log
6 years, 1 month
ISCSI domain won't attach
by Vincent Royer
I setup an iscsi domain in hopes of moving away from NFS. I created a new
logical network for this on a storage vlan. both hosts and storage server
grabbed a good IP on this vlan.
ISCSI Domain connected ok and I started moving disks over from the NFS
domain. Transfers were completing so I let it do its thing.
This morning, after the transfers completed, three things occurred in
quick succession:
1. Affinity Rules Enforcement Manager started.
2. Invalid status on Data Center. Setting status to Non Responsive.
3. Storage Pool Manager runs on Host brian.xxx.net (Address: brian.xxx.net),
Data Center.
4. Storage Domain domiscsi was deactivated by system because it's not
visible by any of the hosts.
Try to attach it again and it fails. Have another coffee and try to attach
again to get logs, and this time it attaches just fine.
domain disconnected vdsm log: https://pastebin.com/pfGerEE5
Successful attach operation vdsm log: https://pastebin.com/c0U07QXg
host Brian can't seem to keep the storage domain
https://pastebin.com/ySAqiqA3
both hosts seem to have connected sessions when looking from the storage
server:
[image: image.png]
Seems like it might be one problematic host, because engine keeps trying to
reboot it to get it to reconnect to the storage domain. Maybe after a few
tries it just deems the domain is bad. Not sure!
Any help is appreciated!
6 years, 1 month
ovirt-ha-agent failed to start
by mustafa.taha.mu95＠gmail.com
hi
i try to start ovirt-ha-agent in my self-host machine but it does not work
if i run journalctl -xe it shows :
Oct 03 04:33:24 ovirtnode44.exalt.ps ovirt-ha-agent[81909]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine ERROR Failed to start necessary mo
Oct 03 04:33:24 ovirtnode44.exalt.ps ovirt-ha-agent[81909]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.agent.Agent ERROR Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 131, in _run_agent
return action(he)
File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 55, in action_prope
return he.start_monitoring()
File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 413, in sta
self._initialize_broker()
File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 535, in _in
m.get('options', {}))
File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 83, in start_mon
.format(type, options, e))
RequestError: Failed to start monitor ping, options {'addr': '192.168.3.2'}: [Errno 2] No such file or di
Oct 03 04:33:24 ovirtnode44.exalt.ps ovirt-ha-agent[81909]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.agent.Agent ERROR Trying to restart agent
anybody have idea ?
6 years, 1 month
clean up a fc lun to reuse it
by Nathanaël Blanchet
Hi all,
I tried to install the Hosted-Engine on a FC lun, and the first time,
it failed at the end because of a sanlock issue.
So I fixed it and the re-deoployed from scratch until this new issue
[ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is
"[Physical device initialization failed. Please check that the device is
empty and accessible by the host.]". HTTP response code is 400.
Before, I found that the lun [2] was used:
[ INFO ] ok: [localhost]
The following luns have been found on the requested target:
[1] 36006016039a142001792ac5b1b9e513a 1024GiB
DGC VRAID
status: free, paths: 8 active
[2] 36006016039a142006755b25b7505d26b 100GiB DGC
VRAID
status: used, paths: 8 active
So it was the good explanation for the failure.
Following the admin guide, I cleaned up the lun using
|# dd if=/dev/zero of=/dev/mapper/||36006016039a142006755b25b7505d26b bs=1M count=200 oflag=direct|
And re-deployed it until it complains the device was not empty despite
of before. The script still reported that the status of the lun was "used"
Finally, I rebooted the host, and that time the script considered the
lun status as free.
So there is somewhere a bit of code into the ansible script that keeps
the old status of the lun before dd, until rebooting.
Is there an other way to refresh the lun status after dd ?
Nathanaël Blanchet
Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5
Tél. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr
6 years, 1 month
Adding hosts to oVirt-Engine
by manish.shukla＠locuz.com
Below error i am getting while adding same host in to Engine.
Error log on Engine. Kindlly Suggest
2018-10-03 12:02:32,271+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-96) [] Command 'GetCapabilitiesAsyncVDSCommand(HostName = 192.168.0.28, VdsIdAndVdsVDSCommandParametersBase:{hostId='0fb0f4ac-162e-4cfd-ab15-641c04861d2f', vds='Host[192.168.0.28,0fb0f4ac-162e-4cfd-ab15-641c04861d2f]'})' execution failed: java.net.ConnectException: Connection refused
2018-10-03 12:02:33,342+05 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.0.28
2018-10-03 12:02:33,345+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetAllVmStatsVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Command 'GetAllVmStatsVDSCommand(HostName = 192.168.0.28, VdsIdVDSCommandParametersBase:{hostId='0fb0f4ac-162e-4cfd-ab15-641c04861d2f'})' execution failed: java.net.ConnectException: Connection refused
2018-10-03 12:02:33,345+05 INFO [org.ovirt.engine.core.vdsbroker.monitoring.PollVmStatsRefresher] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Failed to fetch vms info for host '192.168.0.28' - skipping VMs monitoring.
2018-10-03 12:02:35,283+05 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.0.28
2018-10-03 12:02:35,285+05 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-32) [] Unable to RefreshCapabilities: ConnectException: Connection refused
2018-10-03 12:02:35,288+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-32) [] Command 'GetCapabilitiesAsyncVDSCommand(HostName = 192.168.0.28, VdsIdAndVdsVDSCommandParametersBase:{hostId='0fb0f4ac-162e-4cfd-ab15-641c04861d2f', vds='Host[192.168.0.28,0fb0f4ac-162e-4cfd-ab15-641c04861d2f]'})' execution failed: java.net.ConnectException: Connection refused
6 years, 1 month
Need to register with oVirt community
by Manish Shukla
Dear Team,
Please suggest me how to joined community. I would like to be an implementation of the oVirt infrastructure.
Thanks & Regards,
Manish SHUKLA
6 years, 1 month
P2V Tools for oVirt
by Vinícius Ferrão
Hello,
I’m looking for a P2V tool to migrate some physical machine to oVirt. I’m specifically worried about database servers that must be made virtual.
What are the recommendations and tested tools?
Thanks in advance,
6 years, 1 month
