Ovirt vs RHEV
by Krzysztof Wajda
Hi,
can anyone explain differences between Ovirt and RHEV in version 4.1 ? I
know that RHEV has diffrent product life-cycle, and there are some
diffrences in installation process. Do you know if there are any
additional featuers in Ovirt or RHEV ? Do you know any oifficial statements
from RH about differences ? From my experience there is not too much
diffrences, but I need to prepere such a comaprison for bussines so I
would like to get an info from relaiable source.
Chris
7 years
Ovirt/ RHV Disaster Recovery Designing
by samee095＠gmail.com
Hi
I've looking for some ideas about designing disaster recovery planning with ovirt 4.2. Since 4.2 we have options to have intergration with disaster recovery site also. I went through some videos at internet and want to share if those are correct or not. Thus you can help me regarding what other things I should be having ideas during planning and designing more about this.
1. We've to keep both sites on and already created datacenter, cluster and one site with storage domain attached and other site with no storage domain.
2. We've to keep latency of 10ms at maximum between both sites.
3. Have to configure virtual machines with affinity group.
4. The VM's which are configured as high-available vm, will be migrated first.
5. There's an Ansible script while have to run to fail over and fail back.
Now, please could you help me out regarding this.
1. Where can I find this ansible script? Is this https://github.com/oVirt/ovirt-ansible-disaster-recovery.git?
2. Can this script run at rhv also ? or just for ovirt? Or what other changes I have to make for rhv to have this functionalities?
3. How ovirt/rhv works with the OVN compared to NSX? Is there's any challenges ?
4. Can you share me some high and low level diagram related to rhv disaster planning?
5. How the storage migrates on backend ? During the script ?
6. Where do I run this script? During fail over at primary site and during fail back at secondary site?
7. Basically since only the storage migrates and all other components are on already so basically backend it's only dealing with storage migration according to defined policies ?
Please could you help me out with some designing and ideas what're the best architecture during planning on disaster recovery at RHV.
Thank you.
7 years
=?utf-8?q?=5Bovirt-users=5D?=(v4.2.5-1.el7) Snapshots UI - html null
by Maton, Brett
Hi,
I'm trying to restore a VM snapshot theough the UI but keep running into
this error:
Uncaught exception occurred. Please try reloading the page. Details:
Exception caught: html is null
Please have your administrator check the UI logs
ui log attached.
CentOS 7
oVirt 4.2.5-1.el7
Regards,
Brett
7 years
Re: PollVDSCommand Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils
by Greg Sheremeta
Is your engine functioning at all? I'm not sure if you're saying your
entire engine doesn't work, or just host deploy doesn't work.
What version of ovirt engine is this?
How did you install -- fresh installation, upgrade? From source or rpm?
Best wishes,
Greg
On Wed, Jun 20, 2018 at 12:35 AM Deekshith <deekshith(a)binaryindia.com>
wrote:
> Dear team
>
> Please find the attached server and host logs.. ovirt host
> unresponsive(down), unable to install node packages.
>
>
>
> Regards
>
> Deekshith
>
>
>
> *From:* Roy Golan [mailto:rgolan@redhat.com]
> *Sent:* 19 June 2018 06:57
> *To:* Greg Sheremeta
> *Cc:* devel; users; deekshith(a)binaryindia.com; allen_john(a)mrpl.co.in
> *Subject:* Re: [ovirt-users] PollVDSCommand Error:
> java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils
>
>
>
>
>
> On Tue, 19 Jun 2018 at 16:04 Greg Sheremeta <gshereme(a)redhat.com> wrote:
>
> Sending to devel list.
>
>
>
> Anyone ever seen this before? It sounds like a bad installation if Java
> classes are missing / classloader issues are present.
>
>
>
> 2018-06-18 11:23:11,287+05 INFO
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID:
> VDS_INSTALL_IN_PROGRESS(509), Correlation ID:
> d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null,
> Custom Event ID: -1, Message: Installing Host Node. Retrieving installation
> logs to:
> '/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-20180618112311-mrpl.kvm2-d6a2578b-c58f-43be-b6ad-30a3a0a57a74.log'.
>
> 2018-06-18 11:23:12,131+05 INFO
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (VdsDeploy) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74] EVENT_ID:
> VDS_INSTALL_IN_PROGRESS(509), Correlation ID:
> d6a2578b-c58f-43be-b6ad-30a3a0a57a74, Call Stack: null, Custom ID: null,
> Custom Event ID: -1, Message: Installing Host Node. Stage: Termination.
>
> 2018-06-18 11:23:12,193+05 INFO
> [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor)
> [] Connecting to mrpl.kvm2/172.31.1.32
>
> 2018-06-18 11:23:12,206+05 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand]
> (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74]
> Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils
>
> 2018-06-18 11:23:12,206+05 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand]
> (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74]
> Command 'PollVDSCommand(HostName = Node,
> VdsIdVDSCommandParametersBase:{runAsync='true',
> hostId='d862d5c8-c75e-42ee-867f-ca16a228c2ad'})' execution failed:
> java.util.concurrent.ExecutionException: java.lang.NoClassDefFoundError:
> org/apache/commons/lang/StringUtils
>
> 2018-06-18 11:23:12,707+05 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand]
> (org.ovirt.thread.pool-7-thread-47) [d6a2578b-c58f-43be-b6ad-30a3a0a57a74]
> Error: java.lang.NoClassDefFoundError: org/apache/commons/lang/StringUtils
>
>
>
>
>
> Is that a regular installation and what version?
>
> jdk version?
>
> server.log engine.log
>
>
>
>
>
> On Tue, Jun 19, 2018 at 8:50 AM Deekshith <deekshith(a)binaryindia.com>
> wrote:
>
> Dear team
>
> Please find attached ovirt-engine log .
>
>
>
> Regards
>
> Deekshith
>
>
>
> *From:* Greg Sheremeta [mailto:gshereme@redhat.com]
> *Sent:* 19 June 2018 05:53
> *To:* deekshith(a)binaryindia.com
> *Cc:* users
> *Subject:* Re: [ovirt-users] Unable to start Ovirt engine
>
>
>
> What does it say in the
> /var/log/ovirt-engine/setup/ovirt-engine-setup-xxxxxx.log?
>
>
>
> On Sun, Jun 17, 2018 at 6:01 AM Deekshith <deekshith(a)binaryindia.com>
> wrote:
>
> Hi Team
>
> Please anyone help me to solve this issue.
>
>
>
>
>
> *Error! Filename not specified.*
>
>
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/QPBXKHLK4NS...
>
>
>
>
> --
>
> *GREG SHEREMETA*
>
> SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
>
> Red Hat NA
>
> <https://www.redhat.com/>
>
> gshereme(a)redhat.com IRC: gshereme
>
> <https://red.ht/sig>
>
>
>
>
>
>
> --
>
> *GREG SHEREMETA*
>
> SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
>
> Red Hat NA
>
> <https://www.redhat.com/>
>
> gshereme(a)redhat.com IRC: gshereme
>
> <https://red.ht/sig>
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2AA4B5IPQL7...
>
>
--
GREG SHEREMETA
SENIOR SOFTWARE ENGINEER - TEAM LEAD - RHV UX
Red Hat NA
<https://www.redhat.com/>
gshereme(a)redhat.com IRC: gshereme
<https://red.ht/sig>
7 years
import OVA failed
by du_hongyu＠yeah.net
Hi
my ovirt-engine version is 4.2.1, I import OVA by web UI, face some error, can you give me some advise?
Regards
Hongyu Du
7 years
ovirt, postfix and sendmail
by Fabrice Bacchella
ovirt in version 4.2 choose to incorporate postfix as a mandatory MTA:
yum erase postfix
...
Removing:
postfix x86_64 2:2.10.1-6.el7 @base 12 M
Removing for dependencies:
cockpit-ovirt-dashboard noarch 0.11.28-1.el7 @ovirt-4.2 15 M
ovirt-host x86_64 4.2.3-1.el7 @ovirt-4.2 11 k
ovirt-hosted-engine-setup noarch 2.2.22.1-1.el7 @ovirt-4.2 2.2 M
Is there a way to change that ? It's not about postfix being inferior or superior to other solutions. It's that it didn't ask any thing, didn't check if one was already installed. It's just installed.
For example:
rpm -q --provides postfix
MTA
config(postfix) = 2:2.10.1-6.el7
postfix = 2:2.10.1-6.el7
postfix(x86-64) = 2:2.10.1-6.el7
server(smtp)
smtpd
smtpdaemon
rpm -q --provides sendmail
MTA
config(sendmail) = 8.14.7-5.el7
sendmail = 8.14.7-5.el7
sendmail(x86-64) = 8.14.7-5.el7
server(smtp)
smtpdaemon
There is a lot of other dependencies to declare other than postfix, MTA would have been better.
7 years
Ovirt Networking Setup Questions
by Dave Mintz
Hello,
I am trying to understand, by reading all available docs, how to correctly set up networking.
What I have:
6 nodes, 1 engine - all have 3 nics.
What I want:
To separate traffic into three zones - ovirtmgmt, prod (for vm and admin web interface, data (for db access).
So, I have three subnets - 10.10.10.0, 10.10.20.0, and 10.10.30.0 - with matching VLANs 10, 20, 30
I am trying to understand how bonding and bridging work.
Should I bond all three nics together? The instructions here: https://www.ovirt.org/documentation/how-to/networking/bonding-vlan-bridge/ <https://www.ovirt.org/documentation/how-to/networking/bonding-vlan-bridge/> seem to do that and then create two bridges br0 and ovirtmgmt, which they then assign ip addresses to.
I can do that, but shouldn’t I be configuring all of the networking at the logical network level? So, in that case, should I just create one bond/bridge and then do all of the networking at the logical level?
Sorry if this is newbie stuff.
Thanks
Dave
7 years
Snapshots don't seem to work with Windows VMs
by jmp242＠cornell.edu
I've been testing with Windows 10 1607 LTSB and created several snapshots. I can preview each one, but they all boot with the same configuration and software installed and files as the "active VM" - so I cannot see at all how to roll back changes. Is this a known issue? I believe I'm following the documentation properly, but I can't see that the snapshots are doing anything.
I'm testing on Scientific Linux 7.4 using oVirt 4.2.2.6-1.el7.centos.
7 years
oVirt LLDP Labeler
by Ales Musil
Hello,
I would like to announce that oVirt LLDP Labeler is officially available.
The Labeler is service that runs along with engine and is capable of
labeling host network interfaces according to their reported VLANs via
LLDP. The attached labels are named "lldp_vlan_${VLAN}", where ${VLAN} is
ID of the corresponding VLAN. This can make work of an administrator
easier, because any network with the same label, will be automatically
attached to the corresponding host interface.
The Labeler is currently tested only with Juniper switches which are
capable of reporting all of their VLANs that are present on the interface.
We would like to extend the Labeler with auto bonding feature. Those
interfaces that are detected on the same switch would be automatically
bonded.
The Labeler source is available here:
https://github.com/almusil/ovirt-lldp-labeler
And the build:
https://copr.fedorainfracloud.org/coprs/amusil/ovirt-lldp-labeler/
If you have any suggestions or problems please don't hesitate to report
them on the GitHub page.
--
ALES MUSIL
Associate software engineer - rhv network
Red Hat EMEA <https://www.redhat.com/>
amusil(a)redhat.com IM: amusil
<https://red.ht/sig>
7 years
GlusterFS 4.1
by Chris Boot
All,
Now that GlusterFS 4.1 LTS has been released, and is the "default"
version of GlusterFS in CentOS (you get this from
"centos-release-gluster" now), what's the status with regards to oVirt?
How badly is oVirt 4.2.4 likely to break if one were to upgrade the
gluster* packages to 4.1?
Thanks,
Chris
--
Chris Boot
bootc(a)boo.tc
7 years
