Re: Single instance scaleup.
by Strahil
Hi Leo,
As you do not have a distributed volume , you can easily switch to replica 2 arbiter 1 or replica 3 volumes.
You can use the following for adding the bricks:
https://access.redhat.com/documentation/en-US/Red_Hat_Storage/2.1/html/Ad...
Best Regards,
Strahil NikolivOn May 26, 2019 10:54, Leo David <leoalex(a)gmail.com> wrote:
>
> Hi Stahil,
> Thank you so much for yout input !
>
> gluster volume info
>
>
> Volume Name: engine
> Type: Distribute
> Volume ID: d7449fc2-cc35-4f80-a776-68e4a3dbd7e1
> Status: Started
> Snapshot Count: 0
> Number of Bricks: 1
> Transport-type: tcp
> Bricks:
> Brick1: 192.168.80.191:/gluster_bricks/engine/engine
> Options Reconfigured:
> nfs.disable: on
> transport.address-family: inet
> storage.owner-uid: 36
> storage.owner-gid: 36
> features.shard: on
> performance.low-prio-threads: 32
> performance.strict-o-direct: off
> network.remote-dio: off
> network.ping-timeout: 30
> user.cifs: off
> performance.quick-read: off
> performance.read-ahead: off
> performance.io-cache: off
> cluster.eager-lock: enable
> Volume Name: ssd-samsung
> Type: Distribute
> Volume ID: 76576cc6-220b-4651-952d-99846178a19e
> Status: Started
> Snapshot Count: 0
> Number of Bricks: 1
> Transport-type: tcp
> Bricks:
> Brick1: 192.168.80.191:/gluster_bricks/sdc/data
> Options Reconfigured:
> cluster.eager-lock: enable
> performance.io-cache: off
> performance.read-ahead: off
> performance.quick-read: off
> user.cifs: off
> network.ping-timeout: 30
> network.remote-dio: off
> performance.strict-o-direct: on
> performance.low-prio-threads: 32
> features.shard: on
> storage.owner-gid: 36
> storage.owner-uid: 36
> transport.address-family: inet
> nfs.disable: on
>
> The other two hosts will be 192.168.80.192/193 - this is gluster dedicated network over 10GB sfp+ switch.
> - host 2 wil have identical harware configuration with host 1 ( each disk is actually a raid0 array )
> - host 3 has:
> - 1 ssd for OS
> - 1 ssd - for adding to engine volume in a full replica 3
> - 2 ssd's in a raid 1 array to be added as arbiter for the data volume ( ssd-samsung )
> So the plan is to have "engine" scaled in a full replica 3, and "ssd-samsung" scalled in a replica 3 arbitrated.
>
>
>
>
> On Sun, May 26, 2019 at 10:34 AM Strahil <hunter86_bg(a)yahoo.com> wrote:
>>
>> Hi Leo,
>>
>> Gluster is quite smart, but in order to provide any hints , can you provide output of 'gluster volume info <glustervol>'.
>> If you have 2 more systems , keep in mind that it is best to mirror the storage on the second replica (2 disks on 1 machine -> 2 disks on the new machine), while for the arbiter this is not neccessary.
>>
>> What is your network and NICs ? Based on my experience , I can recommend at least 10 gbit/s interfase(s).
>>
>> Best Regards,
>> Strahil Nikolov
>>
>> On May 26, 2019 07:52, Leo David <leoalex(a)gmail.com> wrote:
>>>
>>> Hello Everyone,
>>> Can someone help me to clarify this ?
>>> I have a single-node 4.2.8 installation ( only two gluster storage domains - distributed single drive volumes ). Now I just got two identintical servers and I would like to go for a 3 nodes bundle.
>>> Is it possible ( after joining the new nodes to the cluster ) to expand the existing volumes across the new nodes and change them to replica 3 arbitrated ?
>>> If so, could you share with me what would it be the procedure ?
>>> Thank you very much !
>>>
>>> Leo
>
>
>
> --
> Best regards, Leo David
4 years, 5 months
Failed to add storage domain
by thunderlight1＠gmail.com
Hi!
I have installed oVirt using the iso ovirt-node-ng-installer-4.3.2-2019031908.el7. I the did run the Host-engine deployment through Cockpit.
I got an error when it tries to create the domain storage. It sucessfully mounted the NFS-share on the host. Bellow is the error I got:
2019-04-14 10:40:38,967+0200 INFO ansible skipped {'status': 'SKIPPED', 'ansible_task': u'Check storage domain free space', 'ansible_host': u'localhost', 'ansible_playbook': u'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 'ansible_type': 'task'}
2019-04-14 10:40:38,967+0200 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7fb6918ad9d0> kwargs
2019-04-14 10:40:39,516+0200 INFO ansible task start {'status': 'OK', 'ansible_task': u'ovirt.hosted_engine_setup : Activate storage domain', 'ansible_playbook': u'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml', 'ansible_type': 'task'}
2019-04-14 10:40:39,516+0200 DEBUG ansible on_any args TASK: ovirt.hosted_engine_setup : Activate storage domain kwargs is_conditional:False
2019-04-14 10:40:41,923+0200 DEBUG var changed: host "localhost" var "otopi_storage_domain_details" type "<type 'dict'>" value: "{
"changed": false,
"exception": "Traceback (most recent call last):\n File \"/tmp/ansible_ovirt_storage_domain_payload_xSFxOp/__main__.py\", line 664, in main\n storage_domains_module.post_create_check(sd_id)\n File \"/tmp/ansible_ovirt_storage_domain_payload_xSFxOp/__main__.py\", line 526, in post_create_check\n id=storage_domain.id,\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in add\n return self._internal_add(storage_domain, headers, query, wait)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232, in _internal_add\n return future.wait() if wait else future\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in wait\n return self._code(response)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in callback\n self._check_fault(response)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in _check_fault\n self._raise_error(response
, body)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in _raise_error\n raise error\nError: Fault reason is \"Operation Failed\". Fault detail is \"[]\". HTTP response code is 400.\n",
"failed": true,
"msg": "Fault reason is \"Operation Failed\". Fault detail is \"[]\". HTTP response code is 400."
}"
2019-04-14 10:40:41,924+0200 DEBUG var changed: host "localhost" var "ansible_play_hosts" type "<type 'list'>" value: "[]"
2019-04-14 10:40:41,924+0200 DEBUG var changed: host "localhost" var "play_hosts" type "<type 'list'>" value: "[]"
2019-04-14 10:40:41,924+0200 DEBUG var changed: host "localhost" var "ansible_play_batch" type "<type 'list'>" value: "[]"
2019-04-14 10:40:41,924+0200 ERROR ansible failed {'status': 'FAILED', 'ansible_type': 'task', 'ansible_task': u'Activate storage domain', 'ansible_result': u'type: <type \'dict\'>\nstr: {\'_ansible_parsed\': True, u\'exception\': u\'Traceback (most recent call last):\\n File "/tmp/ansible_ovirt_storage_domain_payload_xSFxOp/__main__.py", line 664, in main\\n storage_domains_module.post_create_check(sd_id)\\n File "/tmp/ansible_ovirt_storage_domain_payload_xSFxOp/__main__.py", line 526', 'task_duration': 2, 'ansible_host': u'localhost', 'ansible_playbook': u'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml'}
2019-04-14 10:40:41,924+0200 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7fb691843190> kwargs ignore_errors:None
2019-04-14 10:40:41,928+0200 INFO ansible stats {
"ansible_playbook": "/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml",
"ansible_playbook_duration": "00:37 Minutes",
"ansible_result": "type: <type 'dict'>\nstr: {u'localhost': {'unreachable': 0, 'skipped': 6, 'ok': 23, 'changed': 1, 'failures': 1}}",
"ansible_type": "finish",
"status": "FAILED"
}
2019-04-14 10:40:41,928+0200 INFO SUMMARY:
Duration Task Name
-------- --------
[ < 1 sec ] Execute just a specific set of steps
[ 00:01 ] Force facts gathering
[ 00:01 ] Check local VM dir stat
[ 00:01 ] Obtain SSO token using username/password credentials
[ 00:01 ] Fetch host facts
[ < 1 sec ] Fetch cluster ID
[ 00:01 ] Fetch cluster facts
[ 00:01 ] Fetch Datacenter facts
[ < 1 sec ] Fetch Datacenter ID
[ < 1 sec ] Fetch Datacenter name
[ 00:02 ] Add NFS storage domain
[ 00:01 ] Get storage domain details
[ 00:01 ] Find the appliance OVF
[ 00:01 ] Parse OVF
[ < 1 sec ] Get required size
[ FAILED ] Activate storage domain
2019-04-14 10:40:41,928+0200 DEBUG ansible on_any args <ansible.executor.stats.AggregateStats object at 0x7fb69404eb90> kwargs
Any suggestions on how fix this?
4 years, 5 months
How to connect to a guest with vGPU ?
by Josep Manel Andrés Moscardó
Hi,
I got vGPU through mdev working but I am wondering how I would connect
to the client and make use of the GPU. So far I try to access the
console through SPICE and at some point in the boot process it switches
to GPU and I cannot see anything else.
Thanks.
--
Josep Manel Andrés Moscardó
Systems Engineer, IT Operations
EMBL Heidelberg
T +49 6221 387-8394
4 years, 5 months
Issues encountered performing HE install on 4.3
by Alan G
Hi,
I hit a few issues while performing a recent HE install of 4.3. While I managed to find solutions/workarounds to all the problems I thought I might share them here
* As defined in the Ansible defaults the temp dir for building the local HE VM is /var/tmp. I was 80M short of the required space and there did not appear to be a (supported) way to specify a different location. I ended up having to do a bind mount of /var/tmp to get me through the install. Would be nice to be able to specify a custom location.
* Permissive umask required. Our CIS CentOS 7 build requires that default umask is 027. This breaks the installer as it creates the VM image under /var/tmp as root and cannot then access it as qemu user. As the temp files are cleaned up on failure it took me a while to track this one down. My solution was to temporarily set the umask to 022 for the session while running the installer. It would be nice if the installer either handled this by doing a chmod/chown as required, or at least doing a umask pre-check and failing with a meaningful error.
* SSH root login required on host. Again for CIS we have "PermitRoologin no" configured in sshd. This means the add host task fails on the Engine, but instead of a hard failure we get a timeout on the installer. Which left me chasing some imagined routing/bridging/DNS issue. Eventually I realised I could get to the engine logs and found the issue but took several hours. Would be nice if the installer could either support a sudo option or at least perform a root login pre-check and fail with a meaningful error.
Thanks,
Alan
4 years, 6 months
Upgrade scenario to 4.4 for HCI Gluster
by Gianluca Cecchi
Hello,
I saw from some mails in the list that the approach for upgrading from 4.3
to 4.4 will be similar to the 3.6 => 4.0 one.
Reading the RHV 4.0 Self Hosted Engine Guide it seems it was necessary to
have a second host, going through this:
5.4. Upgrading a RHEV-H-Based Self-Hosted Engine Environment
https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.0/...
and also
https://www.ovirt.org/develop/release-management/features/sla/hosted-engi...
upgrade process involved:
- set global ha maintenance
- install a new host (and set it as on hosted engine one)
- migrate engine VM to this host and set the host as the SPM
- create a backup with engine-backup, verify its contents and copy to the
host in some directory
- run the upgrade utility on the host to update the engine VM
hosted-engine --upgrade-appliance
this will create a backup floating disk of the engine vm disk for rollback
purposes and override the existing engine disk with a new one where to
deploy the new engine version applying also the restore from the
engine-backup
--> what are requirements for 4.4 engine VM and so free storage to have on
engine storage domain?
The engine-setup will be automatically executed on the new version engine VM
- exit from global maintenance
- update remaining hosts
Is the above procedure the correct one that I can test on a 4.3.9 lab?
The 3.6 -> 4.0 flow implied that a 4.0 host could run a 3.6 engine VM
Because the backup disk operation is done by the current running engine
itself.
So it should be true also for 4.3 -> 4.4 and a 4.4. host should be able to
run a 4.3 engine, correct?
In case of single 4.3.9 ovirt-node-ng host HCI with Gluster, can I apply
the upgrade in a similar way?
Something like:
- create engine-backup and copy over to the host
- put host into global maintenace
- shutdown all VMS, engine included
- enable 4.4. repo
- install new image-base 4.4
is this correct and I can use 4.3 and 4.4 image base versions or do I have
to sort-of-scratch necessarily? because 4.3 host is based on el7 while 4.4
on el8... but perhaps on mage based system I have flexibility..?
what version of gluster will it be applied? Incompatibilities with the
current 4.3.9 one (version 6.8-1.el7)
- reboot host
- exit global maintenance and wait for engine vm to come up correctly
- enter global maintenance again
- run the upgrade utility on the host
Or do I need at least temporarily a new server to use as the 4.4. host, or
what will be the expected path?
Thanks,
Gianluca
4 years, 6 months
Ubuntu 18.04 and 16.04 cloud images hang at boot up
by suaro＠live.com
I'm using oVirt 4.3 (latest ) and able to successfully provision Centos VMs without any problems.
When I attempt to provision Ubuntu VMs, they hang at startup.
The console shows :
...
...
[ 4.010016] Btrfs loaded
[ 101.268594] random: nonblocking pool is initialized
It stays like this indefinitely.
Again, I have no problems with Centos images, but need Ubuntu
Any tips greatly appreciated.
4 years, 6 months
Backup software recommendations
by Colin Coe
Hi all
I'm looking for recommendations for backup software. It needs to handle
physical and virtual Linux and Windows, RHV and Hyper-V.
It doesn't have to be open source and it doesn't have to be free.
The main features we need are:
- disk to disk backups
- inter-site replication with rate limiting
- be able to handle Linux thin volumes (think RHGS)
- support BMR ans granular file / directory restore
- correctly handle Windows VSS
- support RHEL point releases as soon as they are released
I'm as much after "stay away from" as recommendations.
We currently use Arcserve UDP and it is ... well ... sub optimal
Thanks in advance
CC
4 years, 6 months
Gluster deployment fails with missing UUID
by Shareef Jalloq
Hi,
I'm running the gluster deployment flow and am trying to use a second drive
as the gluster volume. It's /dev/sdb on each node and I'm using the JBOD
mode.
I'm seeing the following gluster ansible task fail and a google search
doesn't bring up much.
TASK [gluster.infra/roles/backend_setup : Create volume groups]
****************
failed: [ovirt-gluster-01.jalloq.co.uk] (item={u'vgname':
u'gluster_vg_sdb', u'pvname': u'/dev/sdb'}) => {"ansible_loop_var": "item",
"changed": false, "err": " Couldn't find device with uuid
Y8FVs8-LP6w-R6CR-Yosh-c40j-17XP-ttP3Np.\n Couldn't find device with uuid
tA4lpO-hM9f-S8ci-BdPh-lTve-0Rh1-3Bcsfy.\n Couldn't find device with uuid
RG3w6j-yrxn-2iMw-ngd0-HgMS-i5dP-CGjaRk.\n Couldn't find device with uuid
lQV02e-TUZE-PXCd-GWEd-eGqe-c2xC-pauHG7.\n Device /dev/sdb excluded by a
filter.\n", "item": {"pvname": "/dev/sdb", "vgname": "gluster_vg_sdb"},
"msg": "Creating physical volume '/dev/sdb' failed", "rc": 5}
4 years, 6 months
oVirt 4.4.0 Beta release refresh is now available for testing
by Sandro Bonazzola
oVirt 4.4.0 Beta release refresh is now available for testing
The oVirt Project is excited to announce the availability of the beta
release of oVirt 4.4.0 refresh (beta 4) for testing, as of April 17th, 2020
This release unleashes an altogether more powerful and flexible open source
virtualization solution that encompasses hundreds of individual changes and
a wide range of enhancements across the engine, storage, network, user
interface, and analytics on top of oVirt 4.3.
Important notes before you try it
Please note this is a Beta release.
The oVirt Project makes no guarantees as to its suitability or usefulness.
This pre-release must not to be used in production.
In particular, please note that upgrades from 4.3 and future upgrades from
this beta to the final 4.4 release from this version are not supported.
Some of the features included in oVirt 4.4.0 Beta require content that will
be available in CentOS Linux 8.2 but can’t be tested on RHEL 8.2 beta yet
due to some incompatibility in openvswitch package shipped in CentOS Virt
SIG which requires to rebuild openvswitch on top of CentOS 8.2.
Known Issues
-
ovirt-imageio development is still in progress. In this beta you can’t
upload images to data domains using the engine web application. You can
still copy iso images into the deprecated ISO domain for installing VMs or
upload and download to/from data domains is fully functional via the REST
API and SDK.
For uploading and downloading via the SDK, please see:
-
https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/upload...
-
https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/downlo...
Both scripts are standalone command line tool, try --help for more info.
Installation instructions
For the engine: either use appliance or:
- Install CentOS Linux 8 minimal from
http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-...
- dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm
- dnf update (reboot if needed)
- dnf module enable -y javapackages-tools pki-deps postgresql:12
- dnf install ovirt-engine
- engine-setup
For the nodes:
Either use oVirt Node ISO or:
- Install CentOS Linux 8 from
http://centos.mirror.garr.it/centos/8.1.1911/isos/x86_64/CentOS-8.1.1911-...
; select minimal installation
- dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm
- dnf update (reboot if needed)
- Attach the host to engine and let it be deployed.
What’s new in oVirt 4.4.0 Beta?
-
Hypervisors based on CentOS Linux 8 (rebuilt from award winning RHEL8),
for both oVirt Node and standalone CentOS Linux hosts
-
Easier network management and configuration flexibility with
NetworkManager
-
VMs based on a more modern Q35 chipset with legacy seabios and UEFI
firmware
-
Support for direct passthrough of local host disks to VMs
-
Live migration improvements for High Performance guests.
-
New Windows Guest tools installer based on WiX framework now moved to
VirtioWin project
-
Dropped support for cluster level prior to 4.2
-
Dropped SDK3 support
-
4K disks support only for file based storage. iSCSI/FC storage do not
support 4k disks yet.
-
Exporting a VM to a data domain
-
Editing of floating disks
-
Integrating ansible-runner into engine, which allows a more detailed
monitoring of playbooks executed from engine
-
Adding/reinstalling hosts are now completely based on Ansible
-
The OpenStack Neutron Agent cannot be configured by oVirt anymore, it
should be configured by TripleO instead
This release is available now on x86_64 architecture for:
* Red Hat Enterprise Linux 8.1
* CentOS Linux (or similar) 8.1
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures
for:
* Red Hat Enterprise Linux 8.1
* CentOS Linux (or similar) 8.1
* oVirt Node 4.4 based on CentOS Linux 8.1 (available for x86_64 only)
See the release notes [1] for installation instructions and a list of new
features and bugs fixed.
If you manage more than one oVirt instance, OKD or RDO we also recommend to
try ManageIQ <http://manageiq.org/>.
In such a case, please be sure to take the qc2 image and not the ova image.
Notes:
- oVirt Appliance is already available for CentOS Linux 8
- oVirt Node NG is already available for CentOS Linux 8
Additional Resources:
* Read more about the oVirt 4.4.0 release highlights:
http://www.ovirt.org/release/4.4.0/
* Get more oVirt project updates on Twitter: https://twitter.com/ovirt
* Check out the latest project news on the oVirt blog:
http://www.ovirt.org/blog/
[1] http://www.ovirt.org/release/4.4.0/
[2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>*
<https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>*
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
4 years, 6 months
Engine UI exception while viewing unattached hosts in Network tab
by Shareef Jalloq
Hi,
I'm following the Gluster setup blog post (
https://blogs.ovirt.org/2018/02/up-and-running-with-ovirt-4-2-and-gluster...)
and am at the 'Storage network' section.
I've created a new 'gluster' network, selected the network and navigated to
the 'Hosts' tab. The guide tells you to click the 'Unattached' button and
then 'Setup Host Networks' for each host. However, clicking the
'Unattached' button fires off a bunch of exceptions rather than displaying
my 3 hosts. The message is:
"Uncaught exception occurred. Please try reloading the page. Details:
(TypeError) : Cannot read property 'N' of null
Please have your administrator check the UI logs"
Anyone seen this before? Where is the UI log located?
Shareef.
4 years, 6 months
