v2v-conversion-host-wrapper binary missing, unable to perform host conversion task
by dhanaraj.ramesh＠yahoo.com
As part of VMware to Ovirt vm migration I'm trying to integrate ovirt cluster to cloudform and make one of the ovirt node - CentOS 8.2 to conversion host, but unfortunately when I preparing conversion host using cloudform ansible playbook, unable to install v2v-conversion-host-wrapper package.
up on checking found that the specified package is not available in yum repo,...
Any help appreciated.
4 years, 3 months
Re: VM console does not work with new cluster.
by eevans＠digitaldatatechs.com
Are you using IP or dns? Has the IP changed? Host IP? Vm id? It sounds like virt viewer cannot find it's target. Connecting with spice or vnc? What do your logs say about the connection? Look at event viewer after a try and see what's in the application log.
Eric Evans
Digital Data Services LLC.
304.660.9080
-----Original Message-----
From: Matthew.Stier(a)fujitsu.com <Matthew.Stier(a)fujitsu.com>
Sent: Tuesday, January 12, 2021 1:08 PM
To: eevans(a)digitaldatatechs.com; 'Strahil Nikolov' <hunter86_bg(a)yahoo.com>; users(a)ovirt.org
Subject: [ovirt-users] Re: VM console does not work with new cluster.
Stop/Edit/Start is the only mechanism available. You cannot change the cluster value for a VM, until it is stopped.
The VMs have static addresses. The VM is fully function on the new cluster.
It’s just that once the VM has been moved to the new cluster, selecting console results in the same behavior, but that virt-viewer starts and stops within a second.
-----Original Message-----
From: eevans(a)digitaldatatechs.com <eevans(a)digitaldatatechs.com>
Sent: Tuesday, January 12, 2021 11:40 AM
To: Stier, Matthew <Matthew.Stier(a)fujitsu.com>; 'Strahil Nikolov' <hunter86_bg(a)yahoo.com>; users(a)ovirt.org
Subject: RE: [ovirt-users] Re: VM console does not work with new cluster.
Did you shut down the vm's and start them up on the new cluster? It sounds like they are associated with the default still and that's where virt viewer is looking for them..
Eric Evans
Digital Data Services LLC.
304.660.9080
-----Original Message-----
From: Matthew.Stier(a)fujitsu.com <Matthew.Stier(a)fujitsu.com>
Sent: Tuesday, January 12, 2021 12:29 PM
To: Strahil Nikolov <hunter86_bg(a)yahoo.com>; users(a)ovirt.org
Subject: [ovirt-users] Re: VM console does not work with new cluster.
Sounds like it, but VMs are running on the same network, with the same IP address. The only firewall involved are on the hosts, and they are both firewalld, and have the same ports and service permitted.
-----Original Message-----
From: Strahil Nikolov <hunter86_bg(a)yahoo.com>
Sent: Sunday, January 10, 2021 10:57 PM
To: users(a)ovirt.org; Stier, Matthew <Matthew.Stier(a)fujitsu.com>
Subject: Re: [ovirt-users] VM console does not work with new cluster.
This sounds like firewall issue.
Best Regards,
Strahil Nikolov
В понеделник, 11 януари 2021 г., 01:05:47 Гринуич+2, Matthew Stier <matthew.stier(a)fujitsu.com> написа:
I've added several new hosts to my data center, and instead of adding them to my 'default' cluster, I created a new cluster ('two').
I can access the VM console (virt-viewer) when the VM is on the 'default' cluster, but once moved to the the new cluster, virt-viewer pops up and disappears in sub-second fashion. Moving the VM back to 'default', restores access.
I'm running virt-viewer 9.0-256 on my Windows 10 Pro laptop. (for months)
I'm running Oracle Linux Virtualization Manager on Oracle Linux 7u9 hosts.
The new ('two') cluster hosts are connected to the same networks as the original systems ('default'). (They have the same assigned IP address.)
Firewalld is reporting the same ports and services enabled on 'default' and 'two' hosts. The VM's are not running firewalls.
Apparently I'm missing something.
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AAKYLXLBV2F...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CPQPPOYSQGA...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RFYNLB53ALN...
4 years, 3 months
Re: VM console does not work with new cluster.
by Strahil Nikolov
> It’s just that once the VM has been moved to the new cluster,
> selecting console results in the same behavior, but that virt-viewer
> starts and stops within a second.
In order to debug, you will need to compare the files provided when you
press the "console" button from both clusters and identify the problem.
Have you compared the firewalld ports on 2 nodes (old and new cluster)
?
Best Regards,
Strahil Nikolov
4 years, 3 months
Re: VM console does not work with new cluster.
by eevans＠digitaldatatechs.com
Did you shut down the vm's and start them up on the new cluster? It sounds like they are associated with the default still and that's where virt viewer is looking for them..
Eric Evans
Digital Data Services LLC.
304.660.9080
-----Original Message-----
From: Matthew.Stier(a)fujitsu.com <Matthew.Stier(a)fujitsu.com>
Sent: Tuesday, January 12, 2021 12:29 PM
To: Strahil Nikolov <hunter86_bg(a)yahoo.com>; users(a)ovirt.org
Subject: [ovirt-users] Re: VM console does not work with new cluster.
Sounds like it, but VMs are running on the same network, with the same IP address. The only firewall involved are on the hosts, and they are both firewalld, and have the same ports and service permitted.
-----Original Message-----
From: Strahil Nikolov <hunter86_bg(a)yahoo.com>
Sent: Sunday, January 10, 2021 10:57 PM
To: users(a)ovirt.org; Stier, Matthew <Matthew.Stier(a)fujitsu.com>
Subject: Re: [ovirt-users] VM console does not work with new cluster.
This sounds like firewall issue.
Best Regards,
Strahil Nikolov
В понеделник, 11 януари 2021 г., 01:05:47 Гринуич+2, Matthew Stier <matthew.stier(a)fujitsu.com> написа:
I've added several new hosts to my data center, and instead of adding them to my 'default' cluster, I created a new cluster ('two').
I can access the VM console (virt-viewer) when the VM is on the 'default' cluster, but once moved to the the new cluster, virt-viewer pops up and disappears in sub-second fashion. Moving the VM back to 'default', restores access.
I'm running virt-viewer 9.0-256 on my Windows 10 Pro laptop. (for months)
I'm running Oracle Linux Virtualization Manager on Oracle Linux 7u9 hosts.
The new ('two') cluster hosts are connected to the same networks as the original systems ('default'). (They have the same assigned IP address.)
Firewalld is reporting the same ports and services enabled on 'default' and 'two' hosts. The VM's are not running firewalls.
Apparently I'm missing something.
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AAKYLXLBV2F...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CPQPPOYSQGA...
4 years, 3 months
VM console does not work with new cluster.
by Matthew Stier
I've added several new hosts to my data center, and instead of adding them to my 'default' cluster, I created a new cluster ('two').
I can access the VM console (virt-viewer) when the VM is on the 'default' cluster, but once moved to the the new cluster, virt-viewer pops up and disappears in sub-second fashion. Moving the VM back to 'default', restores access.
I'm running virt-viewer 9.0-256 on my Windows 10 Pro laptop. (for months)
I'm running Oracle Linux Virtualization Manager on Oracle Linux 7u9 hosts.
The new ('two') cluster hosts are connected to the same networks as the original systems ('default'). (They have the same assigned IP address.)
Firewalld is reporting the same ports and services enabled on 'default' and 'two' hosts. The VM's are not running firewalls.
Apparently I'm missing something.
4 years, 3 months
why the console cannot display ???
by tommy
Hi, everyone:
In my env, I can using web console connect to engine vm:
But , I can not using wen console to connect to other host's VMs. When I try
to connect vm, the VV console appears but soon it disappears, very quickly.
How can I using VV to connect to VMs ?
Thanks!
4 years, 3 months
how to fix time-drift on el8 hosts?
by Nathanaël Blanchet
Hello,
Engine complains about my fresh el8 ovirt 4.4.3 node host:
"Host hadriacus has time-drift of 3202 seconds while maximum configured
value is 300 seconds."
I tried to fix it with these commands:
sudo chronyc -a makestep
chronyc sources
chronyc tracking
... but the host is still not synchronized.
How should I proceed?
--
Nathanaël Blanchet
Supervision réseau
SIRE
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5
Tél. 33 (0)4 67 54 84 55
Fax 33 (0)4 67 54 84 14
blanchet(a)abes.fr
4 years, 3 months
Timeout in "Add HE disks" task
by Jiří Sléžka
Hello,
I am trying to upgrade RHV4.3.10 (standalone) to RHV4.4.3 (HE) in one
step which is probably not supported but in case of our oVirt cluster it
worked well.
I am using hosted-engine --deploy with answer file
hosted-engine --deploy --restore-from-file=backup/backup.tar
--config-append=answer-file_pontus.txt
I can pass until this task
[ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add HE disks]
then ansible fails with a "Timeout exceed while waiting on result state
of the entity."
In the engine I can see that he_virtio_disk is successfuly created and
in OK state but he_sanlock is in LOCKED state. Shared storage domain is FC.
Here is part of ovirt-hosted-engine-setup-ansible-create_target_vm.log
...
{
"_ansible_item_label": {
"content": "hosted_engine_sanlock",
"description": "Hosted-Engine sanlock disk",
"format": "raw",
"name": "he_sanlock",
"size": "1GiB",
"sparse": false
},
"_ansible_no_log": false,
"ansible_loop_var": "item",
"changed": false,
"exception": "Traceback (most recent call last):\n File
\"/tmp/ansible_ovirt_disk_payload_sy1l4b1p/ansible_ovirt_disk_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_disk.py\",
line 802, in main\n File
\"/tmp/ansible_ovirt_disk_payload_sy1l4b1p/ansible_ovirt_disk_payload.zip/ansible_collections/redhat/rhv/plugins/module_utils/ovirt.py\",
line 652, in create\n
poll_interval=self._module.params['poll_interval'],\n File
\"/tmp/ansible_ovirt_disk_payload_sy1l4b1p/ansible_ovirt_disk_payload.zip/ansible_collections/redhat/rhv/plugins/module_utils/ovirt.py\",
line 370, in wait\n raise Exception(\"Timeout exceed while waiting on
result state of the entity.\")\nException: Timeout exceed while waiting
on result state of the entity.\n",
"failed": true,
...
Do have anybody an idea where could be problem?
Thanks in advance,
Jiri
4 years, 3 months
