Unable to sync network settings on new Ovirt installation
by Patrick Lomakin
Hi guys! I encountered a network error that I had not encountered before in a previous installation. I need to set up another network in addition to the ovirtmgmt network to migrate virtual machines, because when migrating a large number of machines, the ovirtmgmt network is loaded to its maximum. And as you know and documentation - all or none of the networks must or must not have a QoS rule. After creating the migration network, I added this network QoS rule and also added QoS to the ovirtmgmt network. But I get this kind of error - Error while executing action HostSetupNetworks: Unknown exception. In the logs I noticed the following:
{'reason': "(2, 'Error: TC classifier not found.\nWe have an error talking to the kernel\\n', ['/sbin/tc', 'filter', 'replace', 'dev', 'bond0', 'protocol', 'all', 'parent', '1389:', 'pref', '200', 'basic', 'match', 'meta(vlan eq 200)', 'flowid', '1389:c8')"}
Who can tell me where to put my energy to find a solution?) Good luck everyone!
1 year, 11 months
oVirt 4.4.10 -> 4.5.x RPM upgrade problems
by joel+ovirt＠robisons.us
Hi folks!
I've have a oVirt 4.4.x installation running for 453 days now without issue. Now that I had some time over the holiday, I thought it would be good to upgrade it to the latest 4.5.x, however im getting stumped on an upgrade step which upgrades the engine setup: https://pastebin.com/mxf6E1R9
A small snippet of the paste-bin here:
[root@cloud ovirt-engine]# dnf update ovirt\*setup\*
Last metadata expiration check: 0:22:46 ago on Fri 23 Dec 2022 05:55:39 PM CST.
Error:
Problem 1: package ovirt-engine-setup-base-4.5.4-1.el8.noarch requires python3-otopi >= 1.10.3, but none of the providers can be installed
- cannot install the best update candidate for package ovirt-engine-setup-base-4.4.10.7-1.el8.noarch
- package python3-otopi-1.10.3-1.el8.noarch is filtered out by exclude filtering
Problem 2: package ovirt-engine-setup-plugin-ovirt-engine-4.5.4-1.el8.noarch requires ovirt-provider-ovn >= 1.2.35, but none of the providers can be installed
- package ovirt-provider-ovn-1.2.36-1.el8.noarch requires ovirt-python-openvswitch >= 2.15, but none of the providers can be installed
- cannot install the best update candidate for package ovirt-engine-setup-plugin-ovirt-engine-4.4.10.7-1.el8.noarch
- package ovirt-python-openvswitch-2.15-3.el8.noarch is filtered out by exclude filtering
- package ovirt-python-openvswitch-2.15-4.el8.noarch is filtered out by exclude filtering
Any help here is appreciated
Happy Holidays!
1 year, 11 months
sun.security.validator erro
by carl langlois
Hi,
Since this morning i am getting this error when tying to acces the vm
portal.
(default task-221) [] server_error:
sun.security.validator.ValidatorException: PKIX path validation failed:
java.security.cert.CertPathValidatorException: validity check failed
It seem to be a certificate issue since i also get this in the log
[org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor) []
Unable to process messages Received fatal alert: certificate_expired
Not sure what are the steps to fix this problem.
Any advice?
Regards
Carl
1 year, 11 months
Fatal Error While Gluster Deployment
by fa rnd2000
fatal: [host1.metrokd.net]: FAILED! => {"msg": "The task includes an option with an undefined variable. The error was: 'str object' has no attribute 'vgname'\n\nThe error appears to be in '/etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/get_vg_groupings.yml': line 3, column 3, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n\n- name: Group devices by volume group name, including existing devices\n ^ here\n"}
1 year, 11 months
FC - Storage domain - space question + direct LUN (FC) SCSI passthrough a good idea ?
by morgan cox
Hi.
Couple of questions regarding Fibre Channel Storage ..
sing fibre channel storage domains - I know when you create storage domains you get 2 files on them 'OVF_STORE' which are less than 1 GB. I am using PREALLOCATED (RAW?) disks - if I were add a (preallocated) disk that fills the entire space would any issues occur ?
e.g the 2 OVF_STORE files are preallocated so I assume they will not grow (or need another one adding in future ?) - I have noticed 'Critical Space Action Blocker:' size - what happens if my disk covers the entire free space in a stoage domain (when using preallocated disks)
Also as a 2nd question : Rather than using a storage domain if I were to create disks using Direct LUN (Fibrechannel LUN) is it a bad idea to enable SCSI-PassThrough ? I ask as the simple FIO benchmarks I did showed improved performance.
Thanks
1 year, 11 months
what happens at vdsm host certificate expiration
by Vinz Vinz
Hi Team,
we are using a custom certificate on the engine apache GUI /etc/pki/ovirt-engine/certs/apache.cer (following https://myhomelab.gr/linux/2020/01/20/replacing_ovirt_ssl.html) and it works fine. The certificate is valid for a very long period.
It seems the vdsm certificate (/etc/pki/vdsm/certs/vdsmcert.pem), on hosts side, has been renewed automatically at that time, but for only one year.
Now we wonder, what will happen when the vdsm certificate will expire? hosts will stop to be in the cluster? if yes what should we do to avoid that? is there a possibility to also apply our custom cert as vdsm cert?
This is for ovirt 4.4 running on rhel8
thx a lot in advance
1 year, 11 months
Hosted-engine update error
by Jason Beard
Greetings! I was updating from ovirt 4.5.3 to ovirt 4.5.4 and my hosted engine has some package errors but the update seems to complete. The errors still exist with dnf. I feel like this is something that needs to be resolved but not sure.
When I query the rpmdb I do see ovirt-*-4.5.4.x packages are installed. When I ran the engine-setup it completed with no errors.
Errors:
# dnf update
Last metadata expiration check: 4:11:16 ago on Tue 20 Dec 2022 04:59:46 AM CST.
Error:
Problem: package gluster-ansible-cluster-1.0.1-2.el8.noarch requires ansible >= 2.6, but none of the providers can be installed
- package ansible-core-2.13.5-1.el8.x86_64 conflicts with ansible < 2.10.0 provided by ansible-2.9.20-1.el8.noarch
- package ansible-core-2.13.5-1.el8.x86_64 conflicts with ansible < 2.10.0 provided by ansible-2.9.17-1.el8.noarch
- package ansible-core-2.13.5-1.el8.x86_64 conflicts with ansible < 2.10.0 provided by ansible-2.9.18-2.el8.noarch
- package ansible-core-2.13.5-1.el8.x86_64 conflicts with ansible < 2.10.0 provided by ansible-2.9.20-2.el8.noarch
- package ansible-core-2.13.5-1.el8.x86_64 conflicts with ansible < 2.10.0 provided by ansible-2.9.21-2.el8.noarch
- package ansible-core-2.13.5-1.el8.x86_64 conflicts with ansible < 2.10.0 provided by ansible-2.9.23-2.el8.noarch
- package ansible-core-2.13.5-1.el8.x86_64 conflicts with ansible < 2.10.0 provided by ansible-2.9.24-2.el8.noarch
- package ansible-core-2.13.5-1.el8.x86_64 conflicts with ansible < 2.10.0 provided by ansible-2.9.27-2.el8.noarch
- package ansible-2.9.27-2.el8.noarch conflicts with ansible-core > 2.11.0 provided by ansible-core-2.13.5-1.el8.x86_64
- cannot install the best update candidate for package gluster-ansible-cluster-1.0-5.el8.noarch
- cannot install the best update candidate for package ansible-core-2.13.5-1.el8.x86_64
- package ansible-2.9.20-1.el8.noarch is filtered out by exclude filtering
- package ansible-1:2.9.27-5.el8.noarch is filtered out by exclude filtering
- package ansible-6.3.0-1.el8.noarch is filtered out by exclude filtering
- package ansible-2.9.16-1.el8.noarch is filtered out by exclude filtering
- package ansible-2.9.19-1.el8.noarch is filtered out by exclude filtering
- package ansible-2.9.23-1.el8.noarch is filtered out by exclude filtering
- package ansible-1:2.9.27-4.el8.noarch is filtered out by exclude filtering
(try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
1 year, 11 months
dashboard grafana to check status of host (up, maintenance or down)
by layeozil＠gmail.com
Hello team,
I have the rhv plateform installed with the monitoring tool grafana with default dashboard (executive, inventory, servicelevel and trend).
I would like to know how i can create a dashboard which will monitor the hosts status more precisely the status (down, up or in maintenance and list them).
1 year, 11 months
