----- Original Message -----
> From: "Lars Nielsen"<lars(a)steinwurf.com>
> To: "Yedidyah Bar David"<didi(a)redhat.com>
> Cc:users@ovirt.org
> Sent: Tuesday, January 13, 2015 11:26:55 AM
> Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
>
>
> On 13/01/15 09:31, Yedidyah Bar David wrote:
>> ----- Original Message -----
>>> From: "Lars Nielsen"<lars(a)steinwurf.com>
>>> To:users@ovirt.org
>>> Sent: Tuesday, January 13, 2015 10:20:20 AM
>>> Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network
>>> missing
>>>
>>> Hey I am new to oVirt, so please be patient
>>>
>>> I have a problem, when setting up new hosts.
>>> Doing the setup it self no problem, but afterwards the status is set to
>>> NonOperational.
>>> Do to the network ovirtmgmt is missing on the machine.
>>>
>>> However I have added the following ifcfg file:
>>> ifcfg-ovirtmgmt::
>>> DEVICE=ovirtmgmt
>>> TYPE=Bridge
>>> ONBOOT=yes
>>> DELAY=0
>>> BOOTPROTO=dhcp
>>> IPADDR=192.168.1.10
>>> NETMASK=255.255.255.0
>>> GATEWAY=192.168.0.1
>>>
>>> And made the adjustments, so the ifcfg-en1, file looks like this:
>>> TYPE="Ethernet"
>>> #BOOTPROTO="dhcp"
>>> DEFROUTE="yes"
>>> IPV4_FAILURE_FATAL="no"
>>> IPV6INIT="yes"
>>> IPV6_AUTOCONF="yes"
>>> IPV6_DEFROUTE="yes"
>>> IPV6_PEERDNS="yes"
>>> IPV6_PEERROUTES="yes"
>>> IPV6_FAILURE_FATAL="no"
>>> NAME="em1"
>>> UUID="bdc14160-3cb6-48d7-b8b9-a382dc384add"
>>> ONBOOT="yes"
>>> HWADDR="F8:B1:56:C1:F9:8E"
>>> PEERDNS="yes"
>>> PEERROUTES="yes"
>>> BRIDGE=ovirtmgmt
>>>
>>>
>>> I do realize that, the guides on the web for oVirt set BOOTPROTO to
>>> static. But at the office, we do not have the possibility of static IP,
>>> at the moment.
>>>
>>> Can some one please tell me what could be wrong ?
>> dhcp should work too. The problem is with NetworkManager.
>> You'll need to have static IPs though for the engine to be able to
>> contact the hosts (as well as the hosts themselves, for hosted-engine HA
>> at least), or you'll have problems if they for some reason get a different
>> IP address from your dhcp server.
>>
>> Please post relevant logs:
>> hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/*
>> engine - /var/log/ovirt-engine/*
>>
>> Thanks and best regards,
> Okay something seems to be a food here, because on the server hosting
> our oVirt instance. We do not have a /var/log/ovirt-hosted-engine
> directory.
I didn't say you should - I wrote a '*' in the end. You should find
/var/log/ovirt-hosted-engine-ha
/var/log/ovirt-hosted-engine-setup
But now I realize you did not mention hosted-engine. Can you detail
a bit your setup? Where is the engine? Where are the hosts? How
did you install and setup?
> However the log files from the two other directories, can be found here:
>
https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar
Please add from engine also /var/log/ovirt-engine/host-deploy/* .
Thanks!
We do not have any ovirt-hosted-engine-* on the server, how ever here is
a link to the complete ovirt-engine folder: