Re: [ovirt-users] bonding 802.3ad mode
Bonjour Nathanael,
You haven't mentioned which version of oVirt you were using - I suspect
it's pre-3.5 and therefore this isn't fixed yet:
https://bugzilla.redhat.com/show_bug.cgi?id=1114085
From 3.5 onwards the warning should not appear for a bond (in
aggregating mode) if only one of its slaves is overloaded.
A bientot, Lior.
On 18/03/15 18:17, Nathanaël Blanchet wrote:
Hi all,
I'm used to create a mode 4 bond0 interface with two 1 Gb/s interfaces
on all my hosts, and ethtool bond0 gives me a functionnal 2000Mb/s.
However, when importing a vm from the export domain (NFS with a speed of
4GB/s), I always have this alert:
"Host siple has network interface which exceeded the defined threshold
[95%] (em3: transmit rate[0%], receive rate [100%])"
It seems that the second nic never works while the first one is overloaded.
Is it an expected behaviour? I believed that the flow was balanced
between the two interfaces in 802.3ad mode.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users