12:29 p.m.
On Thu, Aug 25, 2016 at 11:19 AM, Alexis HAUSER
<alexis.hauser(a)telecom-bretagne.eu> wrote:
>No, it's not: you have to point to the same storage server you
used
>for the first host, hosted-engine-setup will detect the existing
>installation and it will ask if you are going to add an additional
>host.
>At that point it will consume the answer file saved on the shared storage.
This is exactly what I've done but it stills asks me those question about FQDN,
hostname and password, and as we can see it seems to find the answer file :
hosted-engine --deploy
[ INFO ] Stage: Initializing
[ INFO ] Generating a temporary VNC password.
[ INFO ] Stage: Environment setup
Continuing will configure this host for serving as hypervisor and create a VM
where you have to install the engine afterwards.
Are you sure you want to continue? (Yes, No)[Yes]:
Configuration files: []
Log file:
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160825082809-4evynk.log
Version: otopi-1.4.2 (otopi-1.4.2-1.el7ev)
It has been detected that this program is executed through an SSH connection
without using screen.
Continuing with the installation may lead to broken installation if the network
connection fails.
It is highly recommended to abort the installation and run it inside a screen
session using command "screen".
Do you want to continue anyway? (Yes, No)[No]: yes
[ INFO ] Hardware supports virtualization
[ INFO ] Bridge ovirtmgmt already created
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Stage: Environment customization
--== STORAGE CONFIGURATION ==--
During customization use CTRL-D to abort.
Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs3,
nfs4)[nfs3]: iscsi
Please specify the iSCSI portal IP address: x.x.x.x
Please specify the iSCSI portal port [3260]:
Please specify the iSCSI portal user:
Please specify the target name
(iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx,
iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx,
iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx,
iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx)
[iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]:
The following luns have been found on the requested target:
[1] 36002219000897d5e000025bd5754b30f 836GiB DELL MD3000i
status: used, paths: 1 active
[2] 36002219000897d5e00002ea457a406f7 100GiB DELL MD3000i
status: used, paths: 1 active
[3] 36002219000897d5e00002e5357980305 150GiB DELL MD3000i
status: free, paths: 1 active
[4] 36002219000897d5e00002fa357ad109e 500GiB DELL MD3000i
status: free, paths: 1 active
[5] 36002219000897d5e00002fa857ad11c2 80GiB DELL MD3000i
status: free, paths: 1 active
[6] 36002219000897d5e00002f1657a920a2 587GiB DELL MD3000i
status: used, paths: 1 active
Please select the destination LUN (1, 2, 3, 4, 5, 6) [1]: 2
The specified storage location already contains a data domain. Is this an
additional host setup (Yes, No)[Yes]?
[ INFO ] Installing on additional host
Please specify the Host ID [Must be integer, default: 2]:
--== SYSTEM CONFIGURATION ==--
[WARNING] A configuration file must be supplied to deploy Hosted Engine on an additional
host.
[ INFO ] Answer file successfully loaded
It seams it correctly loaded it.
--== NETWORK CONFIGURATION ==--
[ INFO ] Additional host deployment, firewall manager is 'iptables'
The following CPU types are supported by this host:
- model_Haswell-noTSX: Intel Haswell-noTSX Family
- model_SandyBridge: Intel SandyBridge Family
- model_Westmere: Intel Westmere Family
- model_Nehalem: Intel Nehalem Family
- model_Penryn: Intel Penryn Family
- model_Conroe: Intel Conroe Family
--== HOSTED ENGINE CONFIGURATION ==--
Enter the name which will be used to identify this host inside the
Administrator Portal [hosted_engine_2]:
This is fine since the name of your new host is not in the answer file.
Enter 'admin@internal' user password that will be
used for accessing the Administrator Portal:
Confirm 'admin@internal' user password:
This is fine too since we are not saving the admin password in the answer file.
[ INFO ] Stage: Setup validation
[WARNING] Cannot validate host name settings, reason: resolved host does not match any of
the local addresses
Please provide the address of this host.
Note: The engine VM and all the other hosts should be able to correctly resolve
it.
Host address: [localhost.localdomain]:
This instead is an issue of your env:
your additional host is still named 'localhost.localdomain': of course
the engine VM will be able to resolve it but it will not reach your
host; in that case the engine will just try to add the egnine VM
itself as an host creating a mess.
Since we saw this issue many times in the past from user logs, we are
now explicitly rejecting 'localhost.localdomain' as an host address.