On Mon, Mar 19, 2018 at 7:39 AM, Jim Kusznir <jim(a)palousetech.com> wrote:
Hello:
This past week, I created a new gluster store, as I was running out of
disk space on my main, SSD-backed storage pool. I used 2TB Seagate
FireCuda drives (hybrid SSD/spinning). Hardware is Dell R610's with
integral PERC/6i cards. I placed one disk per machine, exported the disk
as a single disk volume from the raid controller, formatted it XFS, mounted
it, and dedicated it to a new replica 3 gluster volume.
Since doing so, I've been having major performance problems. One of my
windows VMs sits at 100% disk utilization nearly continously, and its
painful to do anything on it. A Zabbix install on CentOS using mysql as
the backing has 70%+ iowait nearly all the time, and I can't seem to get
graphs loaded from the web console. Its also always spewing errors that
ultimately come down to insufficient disk performance issues.
All of this was working OK before the changes. There are two:
Old storage was SSD backed, Replica 2 + arb, and running on the same GigE
network as management and main VM network.
New storage was created using the dedicated Gluster network (running on
em4 on these servers, completely different subnet (174.x vs 192.x), and was
created replica 3 (no arb), on the FireCuda disks (seem to be the fastest I
could afford for non-SSD, as I needed a lot more storage).
My attempts to watch so far have NOT shown maxed network interfaces (using
bwm-ng on the command line); in fact, the gluster interface is usually
below 20% utilized.
I'm not sure how to meaningfully measure the performance of the disk
itself; I'm not sure what else to look at. My cluster is not very usable
currently, though. IOWait on my hosts appears to be below 0.5%, usually
0.0 to 0.1. Inside the VMs is a whole different story.
My cluster is currently running ovirt 4.1. I'm interested in going to
4.2, but I think I need to fix this first.
Can you provide the info of the volume using "gluster volume info" and also
profile the volume while running the tests where you experience the
performance issue, and share results?
For info on how to profile (server-side profiling) -
https://docs.gluster.org/en/latest/Administrator%20Guide/Performance%20Te...
Thanks!
--Jim
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users