[ovirt-users] Re: ovirt metrics ansible error

I just tried again from scratch this time making sure a proper wildcard DNS entry existed and without using the set /etc/hosts option and am still running in to the pods issue. Can anyone confirm if this requires a public external IP to work? I am working on an internal DNS zone here and natted ips. On Tue, May 28, 2019 at 3:28 PM Edward Berger <edwberger(a)gmail.com&gt; wrote: > In my case it was a single bare metal host, so that would be equivalent > to disabling iptables on the master0 VM you're installing to, in your ovirt > scenario. > > On Tue, May 28, 2019 at 1:25 PM Jayme <jaymef(a)gmail.com&gt; wrote: > >> Do you mean the iptables firewall on the server being installed to i.e. >> master0 or the actual oVirt host that the master0 VM is running on? I did >> try flushing iptables rules on master0 VM then ran plays again from >> installer VM but fail at the same point. >> >> Does this log message have anything to do with the issue, /etc/cni >> directory does not even exist on master0 VM. >> >> May 28 17:23:35 master0 origin-node: W0528 17:23:35.012902 10434 >> cni.go:172] Unable to update cni config: No networks found in /etc/cni/net.d >> May 28 17:23:35 master0 origin-node: E0528 17:23:35.013398 10434 >> kubelet.go:2101] Container runtime network not ready: NetworkReady=false >> reason:NetworkPluginNotReady message:docker: network plugin is not ready: >> cni config uninitialized >> >> >> >> On Tue, May 28, 2019 at 1:19 PM Edward Berger <edwberger(a)gmail.com&gt; >> wrote: >> >>> > TASK [openshift_control_plane : Wait for control plane pods to >>> appear] ********* >>> > Monday 27 May 2019 13:31:54 +0000 (0:00:00.180) 0:14:33.857 >>> ************ >>> > FAILED - RETRYING: Wait for control plane pods to appear (60 retries >>> left). >>> > FAILED - RETRYING: Wait for control plane pods to appear (59 retries >>> left). >>> > It eventually counts all the way down to zero and fails. >>> >>> This looks a lot like the issues I saw when the host firewall >>> (iptables) was blocking another OKD all-in-one-host install script [1]. >>> Disabling iptables allowed the installation to continue for my proof of >>> concept "cluster". >>> >>> [1]https://github.com/gshipley/installcentos >>> >>> The other error I had with [1] was it was trying to install a couple of >>> packages (zile and python2-pip) from EPEL with the repo disabled. >>> >>> >>> >>> On Tue, May 28, 2019 at 10:41 AM Jayme <jaymef(a)gmail.com&gt; wrote: >>> >>>> Shirly, >>>> >>>> Oh and I should mention that I did verify that NetworkManager was >>>> installed on the master0 VM and enabled/started the second go around. So >>>> that service is there and running. >>>> >>>> # systemctl list-unit-files | grep Network >>>> dbus-org.freedesktop.NetworkManager.service >>>> enabled >>>> NetworkManager-dispatcher.service >>>> enabled >>>> NetworkManager-wait-online.service >>>> enabled >>>> NetworkManager.service >>>> enabled >>>> >>>> On Tue, May 28, 2019 at 11:13 AM Jayme <jaymef(a)gmail.com&gt; wrote: >>>> >>>>> Shirly, >>>>> >>>>> I appreciate the help with this. Unfortunately I am still running in >>>>> to the same problem. So far I've tried to install/enable/start >>>>> NetworkManager on the existing "master0" server and re-ran the plans from >>>>> the installer VM. I ran in to the same problem waiting for control plane >>>>> pods and same errors in syslog. >>>>> >>>>> So I wiped everything out, killed the template along with the >>>>> installer and master VMs. On oVirt engine (I am running 4.3.3.7-1 stable) >>>>> I did have ovirt-engine-metrics-1.3.0x rpm installed, no yum updates >>>>> available on an update check. So I installed >>>>> http://resources.ovirt.org/pub/yum-repo/ovirt-release43-pre.rpm then >>>>> proceeded to install the latest version of ovirt-engine-metrics which gave >>>>> me: ovirt-engine-metrics-1.3.1-1.el7.noarch on hosted engine. >>>>> >>>>> After that package was installed I proceeded to follow steps from >>>>> beginning outlined at: >>>>> https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_... -- >>>>> I ran in to the docker check issue again (same as my initial email) so I >>>>> disabled that and again got as far as starting control plane pods before >>>>> failure. >>>>> >>>>> Not sure where to go from here at this point. The only thing I can >>>>> think of that I did differently vs the instructions outlined above is that >>>>> I have not crated the wildcard DNS record, however I did set configs to >>>>> create /etc/hosts entries and they /etc/hosts on the machines have the >>>>> proper IPs assigned for all hostnames (automatically added by the ansible >>>>> plays). >>>>> >>>>> Any ideas how I can get past the plane pods issue? >>>>> >>>>> Thanks! >>>>> >>>>> On Tue, May 28, 2019 at 4:23 AM Shirly Radco <sradco(a)redhat.com&gt; >>>>> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> The latest release of 4.3.z should already include a fix for this >>>>>> issue, ovirt-engine-metrics-1.3.1 rpm. >>>>>> >>>>>> The issue is that it requires the NetworkManagar to be installed, >>>>>> running and enabled for it to work. >>>>>> >>>>>> You can install it manually on the master0 vm , start and enable it >>>>>> or you can also install the updated rpm from the nightly builds if your >>>>>> environment is oVirt 4.2.z: >>>>>> >>>>>> https://resources.ovirt.org/pub/ovirt-4.2-snapshot/rpm/el7/noarch/ovirt-e... >>>>>> >>>>>> Relevant patches are: >>>>>> https://gerrit.ovirt.org/#/c/99959/ >>>>>> https://gerrit.ovirt.org/#/c/99718/ >>>>>> >>>>>> Best regards, >>>>>> >>>>>> -- >>>>>> >>>>>> Shirly Radco >>>>>> >>>>>> BI Senior Software Engineer >>>>>> >>>>>> Red Hat <https://www.redhat.com/> >>>>>> >>>>>> <https://www.redhat.com/> >>>>>> >>>>>> >>>>>> On Mon, May 27, 2019 at 4:41 PM Jayme <jaymef(a)gmail.com&gt; wrote: >>>>>> >>>>>>> I managed to get past that but am running in to another problem >>>>>>> later in the process on the control plane pods to appear task. I thought >>>>>>> perhaps a glitch in the process from the failed docker step previously so >>>>>>> after a few more runs I tried killing everything and restarting the metrics >>>>>>> process again from the very beginning and end up hitting the same issue >>>>>>> with control plane pods even though all other steps/tasks seem to be >>>>>>> working. >>>>>>> >>>>>>> I'm just getting this: >>>>>>> >>>>>>> TASK [openshift_control_plane : Wait for control plane pods to >>>>>>> appear] ********* >>>>>>> Monday 27 May 2019 13:31:54 +0000 (0:00:00.180) 0:14:33.857 >>>>>>> ************ >>>>>>> FAILED - RETRYING: Wait for control plane pods to appear (60 >>>>>>> retries left). >>>>>>> FAILED - RETRYING: Wait for control plane pods to appear (59 >>>>>>> retries left). >>>>>>> FAILED - RETRYING: Wait for control plane pods to appear (58 >>>>>>> retries left). >>>>>>> FAILED - RETRYING: Wait for control plane pods to appear (57 >>>>>>> retries left). >>>>>>> FAILED - RETRYING: Wait for control plane pods to appear (56 >>>>>>> retries left). >>>>>>> >>>>>>> It eventually counts all the way down to zero and fails. >>>>>>> >>>>>>> In syslog of the master0 server I'm seeing some errors related to >>>>>>> cni config >>>>>>> >>>>>>> May 27 13:39:07 master0 ansible-oc_obj: Invoked with files=None >>>>>>> kind=pod force=False all_namespaces=None field_selector=None >>>>>>> namespace=kube-system delete_after=False >>>>>>> kubeconfig=/etc/origin/master/admin.kubeconfig content=None state=list >>>>>>> debug=False selector=None name=master-api-master0.xxxxxx.com >>>>>>> May 27 13:39:09 master0 origin-node: W0527 13:39:09.064230 20150 >>>>>>> cni.go:172] Unable to update cni config: No networks found in /etc/cni/net.d >>>>>>> May 27 13:39:09 master0 origin-node: E0527 13:39:09.064670 20150 >>>>>>> kubelet.go:2101] Container runtime network not ready: NetworkReady=false >>>>>>> reason:NetworkPluginNotReady message:docker: network plugin is not ready: >>>>>>> cni config uninitialized >>>>>>> May 27 13:39:13 master0 ansible-oc_obj: Invoked with files=None >>>>>>> kind=pod force=False all_namespaces=None field_selector=None >>>>>>> namespace=kube-system delete_after=False >>>>>>> kubeconfig=/etc/origin/master/admin.kubeconfig content=None state=list >>>>>>> debug=False selector=None name=master-api-master0.xxxxxx.com >>>>>>> May 27 13:39:14 master0 origin-node: W0527 13:39:14.066911 20150 >>>>>>> cni.go:172] Unable to update cni config: No networks found in /etc/cni/net.d >>>>>>> May 27 13:39:14 master0 origin-node: E0527 13:39:14.067321 20150 >>>>>>> kubelet.go:2101] Container runtime network not ready: NetworkReady=false >>>>>>> reason:NetworkPluginNotReady message:docker: network plugin is not ready: >>>>>>> cni config uninitialized >>>>>>> May 27 13:39:14 master0 origin-node: E0527 13:39:14.814705 20150 >>>>>>> summary.go:102] Failed to get system container stats for >>>>>>> "/system.slice/origin-node.service": failed to get cgroup stats for >>>>>>> "/system.slice/origin-node.service": failed to get container info for >>>>>>> "/system.slice/origin-node.service": unknown container >>>>>>> "/system.slice/origin-node.service" >>>>>>> May 27 13:39:19 master0 origin-node: W0527 13:39:19.069450 20150 >>>>>>> cni.go:172] Unable to update cni config: No networks found in /etc/cni/net.d >>>>>>> May 27 13:39:19 master0 origin-node: E0527 13:39:19.069850 20150 >>>>>>> kubelet.go:2101] Container runtime network not ready: NetworkReady=false >>>>>>> reason:NetworkPluginNotReady message:docker: network plugin is not ready: >>>>>>> cni config uninitialized >>>>>>> >>>>>>> On Mon, May 27, 2019 at 9:35 AM Shirly Radco <sradco(a)redhat.com&gt; >>>>>>> wrote: >>>>>>> >>>>>>>> Hi Jayme, >>>>>>>> >>>>>>>> Thank you for reaching out. >>>>>>>> Please try rerunning the ansible playbook. >>>>>>>> If this doesn't work, try adding to the integ.ini in the metrics >>>>>>>> vm >>>>>>>> openshift_disable_check=docker_storage >>>>>>>> and rerun the ansible playbook again. >>>>>>>> >>>>>>>> Please update how it goes. >>>>>>>> >>>>>>>> Best regards, >>>>>>>> >>>>>>>> -- >>>>>>>> >>>>>>>> Shirly Radco >>>>>>>> >>>>>>>> BI Senior Software Engineer >>>>>>>> >>>>>>>> Red Hat <https://www.redhat.com/> >>>>>>>> >>>>>>>> <https://www.redhat.com/> >>>>>>>> >>>>>>>> >>>>>>>> On Sun, May 26, 2019 at 9:34 PM Jayme <jaymef(a)gmail.com&gt; wrote: >>>>>>>> >>>>>>>>> I'm running in to this ansible error during oVirt metrics >>>>>>>>> installation (following procedures at: >>>>>>>>> https://ovirt.org/documentation/metrics-install-guide/Installing_Metrics_... >>>>>>>>> ) >>>>>>>>> >>>>>>>>> This is happening late in the process, after successfully >>>>>>>>> deploying the installation VM and then running second step from the metrics >>>>>>>>> VM. >>>>>>>>> >>>>>>>>> CHECK [memory_availability : master0.xxxxxx.com] >>>>>>>>> ************************************************************************************************* >>>>>>>>> fatal: [master0.xxxxxxx.com]: FAILED! => {"changed": true, >>>>>>>>> "checks": {"disk_availability": {}, "docker_image_availability": >>>>>>>>> {"changed": true}, "docker_storage": {"failed": true, "failures": >>>>>>>>> [["OpenShiftCheckException", "Could not find imported module support code >>>>>>>>> for docker_info. Looked for either AnsibleDockerClient.py or >>>>>>>>> docker_common.py\nTraceback (most recent call last):\n File >>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/action_plugins/openshift_health_check.py\", >>>>>>>>> line 225, in run_check\n result = check.run()\n File >>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/docker_storage.py\", >>>>>>>>> line 53, in run\n docker_info = self.execute_module(\"docker_info\", >>>>>>>>> {})\n File >>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/__init__.py\", >>>>>>>>> line 211, in execute_module\n result = self._execute_module(module_name, >>>>>>>>> module_args, self.tmp, self.task_vars)\n File >>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\", >>>>>>>>> line 809, in _execute_module\n (module_style, shebang, module_data, >>>>>>>>> module_path) = self._configure_module(module_name=module_name, >>>>>>>>> module_args=module_args, task_vars=task_vars)\n File >>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\", >>>>>>>>> line 203, in _configure_module\n environment=final_environment)\n File >>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\", >>>>>>>>> line 1023, in modify_module\n environment=environment)\n File >>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\", >>>>>>>>> line 859, in _find_module_utils\n recursive_finder(module_name, >>>>>>>>> b_module_data, py_module_names, py_module_cache, zf)\n File >>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\", >>>>>>>>> line 621, in recursive_finder\n raise AnsibleError(' >>>>>>>>> '.join(msg))\nAnsibleError: Could not find imported module support code for >>>>>>>>> docker_info. Looked for either AnsibleDockerClient.py or >>>>>>>>> docker_common.py\n"]], "msg": "Could not find imported module support code >>>>>>>>> for docker_info. Looked for either AnsibleDockerClient.py or >>>>>>>>> docker_common.py\nTraceback (most recent call last):\n File >>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/action_plugins/openshift_health_check.py\", >>>>>>>>> line 225, in run_check\n result = check.run()\n File >>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/docker_storage.py\", >>>>>>>>> line 53, in run\n docker_info = self.execute_module(\"docker_info\", >>>>>>>>> {})\n File >>>>>>>>> \"/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/__init__.py\", >>>>>>>>> line 211, in execute_module\n result = self._execute_module(module_name, >>>>>>>>> module_args, self.tmp, self.task_vars)\n File >>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\", >>>>>>>>> line 809, in _execute_module\n (module_style, shebang, module_data, >>>>>>>>> module_path) = self._configure_module(module_name=module_name, >>>>>>>>> module_args=module_args, task_vars=task_vars)\n File >>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py\", >>>>>>>>> line 203, in _configure_module\n environment=final_environment)\n File >>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\", >>>>>>>>> line 1023, in modify_module\n environment=environment)\n File >>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\", >>>>>>>>> line 859, in _find_module_utils\n recursive_finder(module_name, >>>>>>>>> b_module_data, py_module_names, py_module_cache, zf)\n File >>>>>>>>> \"/usr/lib/python2.7/site-packages/ansible/executor/module_common.py\", >>>>>>>>> line 621, in recursive_finder\n raise AnsibleError(' >>>>>>>>> '.join(msg))\nAnsibleError: Could not find imported module support code for >>>>>>>>> docker_info. Looked for either AnsibleDockerClient.py or >>>>>>>>> docker_common.py\n"}, "memory_availability": {}, "package_availability": >>>>>>>>> {"changed": false, "invocation": {"module_args": {"packages": ["PyYAML", >>>>>>>>> "bash-completion", "bind", "ceph-common", "dnsmasq", "docker", "firewalld", >>>>>>>>> "flannel", "glusterfs-fuse", "httpd-tools", "iptables", >>>>>>>>> "iptables-services", "iscsi-initiator-utils", "libselinux-python", >>>>>>>>> "nfs-utils", "ntp", "openssl", "origin", "origin-clients", >>>>>>>>> "origin-hyperkube", "origin-node", "pyparted", "python-httplib2", >>>>>>>>> "yum-utils"]}}}, "package_version": {"changed": false, "invocation": >>>>>>>>> {"module_args": {"package_list": [{"check_multi": false, "name": "origin", >>>>>>>>> "version": ""}, {"check_multi": false, "name": "origin-master", "version": >>>>>>>>> ""}, {"check_multi": false, "name": "origin-node", "version": ""}], >>>>>>>>> "package_mgr": "yum"}}}}, "msg": "One or more checks failed", >>>>>>>>> "playbook_context": "install"} >>>>>>>>> >>>>>>>>> NO MORE HOSTS LEFT >>>>>>>>> ******************************************************************************************************************************************* >>>>>>>>> >>>>>>>>> PLAY RECAP >>>>>>>>> *************************************************************************************************************************************************** >>>>>>>>> localhost : ok=35 changed=1 unreachable=0 >>>>>>>>> failed=0 skipped=16 rescued=0 ignored=0 >>>>>>>>> master0.xxxxxxx.com : ok=96 changed=6 unreachable=0 >>>>>>>>> failed=1 skipped=165 rescued=0 ignored=0 >>>>>>>>> >>>>>>>>> >>>>>>>>> INSTALLER STATUS >>>>>>>>> ********************************************************************************************************************************************* >>>>>>>>> Initialization : Complete (0:00:16) >>>>>>>>> Health Check : In Progress (0:00:36) >>>>>>>>> This phase can be restarted by running: >>>>>>>>> playbooks/openshift-checks/pre-install.yml >>>>>>>>> Sunday 26 May 2019 16:36:25 +0000 (0:00:36.151) >>>>>>>>> 0:01:56.339 ************ >>>>>>>>> >>>>>>>>> =============================================================================== >>>>>>>>> Run health checks (install) - EL >>>>>>>>> --------------------------------------------------------------------------------------------------------------------- >>>>>>>>> 36.15s >>>>>>>>> os_firewall : Ensure iptables services are not enabled >>>>>>>>> ------------------------------------------------------------------------------------------------ >>>>>>>>> 2.74s >>>>>>>>> openshift_repos : Ensure libselinux-python is installed >>>>>>>>> ----------------------------------------------------------------------------------------------- >>>>>>>>> 1.77s >>>>>>>>> openshift_repos : refresh cache >>>>>>>>> ----------------------------------------------------------------------------------------------------------------------- >>>>>>>>> 1.60s >>>>>>>>> Gather Cluster facts >>>>>>>>> ---------------------------------------------------------------------------------------------------------------------------------- >>>>>>>>> 1.51s >>>>>>>>> container_runtime : Fixup SELinux permissions for docker >>>>>>>>> ---------------------------------------------------------------------------------------------- >>>>>>>>> 1.33s >>>>>>>>> container_runtime : Place additional/blocked/insecure registries >>>>>>>>> in /etc/containers/registries.conf >>>>>>>>> --------------------------------------------------- 1.30s >>>>>>>>> Ensure openshift-ansible installer package deps are installed >>>>>>>>> ----------------------------------------------------------------------------------------- >>>>>>>>> 1.29s >>>>>>>>> container_runtime : Install Docker >>>>>>>>> -------------------------------------------------------------------------------------------------------------------- >>>>>>>>> 1.17s >>>>>>>>> Initialize openshift.node.sdn_mtu >>>>>>>>> --------------------------------------------------------------------------------------------------------------------- >>>>>>>>> 1.13s >>>>>>>>> os_firewall : Install firewalld packages >>>>>>>>> -------------------------------------------------------------------------------------------------------------- >>>>>>>>> 1.13s >>>>>>>>> container_runtime : Set various Docker options >>>>>>>>> -------------------------------------------------------------------------------------------------------- >>>>>>>>> 1.11s >>>>>>>>> install NetworkManager >>>>>>>>> -------------------------------------------------------------------------------------------------------------------------------- >>>>>>>>> 1.10s >>>>>>>>> openshift_repos : Configure correct origin release repository >>>>>>>>> ----------------------------------------------------------------------------------------- >>>>>>>>> 1.05s >>>>>>>>> container_runtime : Get current installed Docker version >>>>>>>>> ---------------------------------------------------------------------------------------------- >>>>>>>>> 1.04s >>>>>>>>> openshift_repos : Configure origin gpg keys >>>>>>>>> ----------------------------------------------------------------------------------------------------------- >>>>>>>>> 1.04s >>>>>>>>> openshift_repos : Remove openshift_additional.repo file >>>>>>>>> ----------------------------------------------------------------------------------------------- >>>>>>>>> 0.99s >>>>>>>>> container_runtime : Setup the docker-storage for overlay >>>>>>>>> ---------------------------------------------------------------------------------------------- >>>>>>>>> 0.96s >>>>>>>>> Detecting Operating System from ostree_booted >>>>>>>>> --------------------------------------------------------------------------------------------------------- >>>>>>>>> 0.95s >>>>>>>>> Gather Cluster facts >>>>>>>>> ---------------------------------------------------------------------------------------------------------------------------------- >>>>>>>>> 0.92s >>>>>>>>> >>>>>>>>> >>>>>>>>> Failure summary: >>>>>>>>> >>>>>>>>> >>>>>>>>> 1. Hosts: master0.xxxxxxx.com >>>>>>>>> Play: OpenShift Health Checks >>>>>>>>> Task: Run health checks (install) - EL >>>>>>>>> Message: One or more checks failed >>>>>>>>> Details: check "docker_storage": >>>>>>>>> Could not find imported module support code for >>>>>>>>> docker_info. Looked for either AnsibleDockerClient.py or docker_common.py >>>>>>>>> Traceback (most recent call last): >>>>>>>>> File >>>>>>>>> "/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/action_plugins/openshift_health_check.py", >>>>>>>>> line 225, in run_check >>>>>>>>> result = check.run() >>>>>>>>> File >>>>>>>>> "/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/docker_storage.py", >>>>>>>>> line 53, in run >>>>>>>>> docker_info = >>>>>>>>> self.execute_module("docker_info", {}) >>>>>>>>> File >>>>>>>>> "/usr/share/ansible/openshift-ansible/roles/openshift_health_checker/openshift_checks/__init__.py", >>>>>>>>> line 211, in execute_module >>>>>>>>> result = self._execute_module(module_name, >>>>>>>>> module_args, self.tmp, self.task_vars) >>>>>>>>> File >>>>>>>>> "/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py", line >>>>>>>>> 809, in _execute_module >>>>>>>>> (module_style, shebang, module_data, >>>>>>>>> module_path) = self._configure_module(module_name=module_name, >>>>>>>>> module_args=module_args, task_vars=task_vars) >>>>>>>>> File >>>>>>>>> "/usr/lib/python2.7/site-packages/ansible/plugins/action/__init__.py", line >>>>>>>>> 203, in _configure_module >>>>>>>>> environment=final_environment) >>>>>>>>> File >>>>>>>>> "/usr/lib/python2.7/site-packages/ansible/executor/module_common.py", line >>>>>>>>> 1023, in modify_module >>>>>>>>> environment=environment) >>>>>>>>> File >>>>>>>>> "/usr/lib/python2.7/site-packages/ansible/executor/module_common.py", line >>>>>>>>> 859, in _find_module_utils >>>>>>>>> recursive_finder(module_name, b_module_data, >>>>>>>>> py_module_names, py_module_cache, zf) >>>>>>>>> File >>>>>>>>> "/usr/lib/python2.7/site-packages/ansible/executor/module_common.py", line >>>>>>>>> 621, in recursive_finder >>>>>>>>> raise AnsibleError(' '.join(msg)) >>>>>>>>> AnsibleError: Could not find imported module >>>>>>>>> support code for docker_info. Looked for either AnsibleDockerClient.py or >>>>>>>>> docker_common.py >>>>>>>>> >>>>>>>>> >>>>>>>>> The execution of "install_okd.yaml" includes checks designed to >>>>>>>>> fail early if the requirements of the playbook are not met. One or more of >>>>>>>>> these checks failed. To disregard these results,explicitly disable checks >>>>>>>>> by setting an Ansible variable: >>>>>>>>> openshift_disable_check=docker_storage >>>>>>>>> Failing check names are shown in the failure details above. Some >>>>>>>>> checks may be configurable by variables if your requirements are different >>>>>>>>> from the defaults; consult check documentation. >>>>>>>>> Variables can be set in the inventory or passed on the command >>>>>>>>> line using the -e flag to ansible-playbook. >>>>>>>>> _______________________________________________ >>>>>>>>> Users mailing list -- users(a)ovirt.org >>>>>>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>>>>>> oVirt Code of Conduct: >>>>>>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>>>>>> List Archives: >>>>>>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/SEFPOF36T7G... >>>>>>>>> >>>>>>>> _______________________________________________ >>>> Users mailing list -- users(a)ovirt.org >>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>> oVirt Code of Conduct: >>>> https://www.ovirt.org/community/about/community-guidelines/ >>>> List Archives: >>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/CN6G76Z7MVN... >>>> >>>