12:44 p.m.
Hi Marcin,
Thank you for your response.
I used engine-setup to do the configuration. Only exception is that I
had to run "vdsm-tool ovn-config engine-ip local-ip" (ie. vdsm-tool
ovn-config 10.0.1.101 10.0.1.21) on hypervisors.
Here is the output of requested commands:
[root@oe ~]# ovn-sbctl show
Chassis "049183d5-61b6-4b9c-bae3-c7b10d30f8cb"
hostname: "o2.hirundinidae.local"
Encap geneve
ip: "10.0.1.18"
options: {csum="true"}
Port_Binding "87c5e44a-7c8b-41b2-89a6-fa52f27643ed"
Chassis "972f1b7b-10de-4e4f-a5f9-f080890f087d"
hostname: "o3.hirundinidae.local"
Encap geneve
ip: "10.0.1.21"
options: {csum="true"}
Port_Binding "ccea5185-3efa-4d9c-9475-9e46009fea4f"
Port_Binding "e868219c-f16c-45c6-b7b1-72d044fee602"
[root@oe ~]# ovn-nbctl show
switch 7d264a6c-ea48-4a6d-9663-5244102dc9bb (vm-private)
port 4ec3ecf6-d04a-406c-8354-c5e195ffde05
addresses: ["00:1a:4a:16:01:06 dynamic"]
switch 40aedb7d-b1c3-400e-9ddb-16bee3bb312a (vm-public)
port 87c5e44a-7c8b-41b2-89a6-fa52f27643ed
addresses: ["00:1a:4a:16:01:03"]
port ccea5185-3efa-4d9c-9475-9e46009fea4f
addresses: ["00:1a:4a:16:01:0c"]
port e868219c-f16c-45c6-b7b1-72d044fee602
addresses: ["00:1a:4a:16:01:0a"]
[root@o2 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s31f6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovirtmgmt state UP qlen 1000
link/ether 78:f2:9e:90:bc:64 brd ff:ff:ff:ff:ff:ff
3: enp0s20f0u5c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master public state UNKNOWN qlen 1000
link/ether 50:3e:aa:4c:9b:01 brd ff:ff:ff:ff:ff:ff
4: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen
1000
link/ether 82:49:e1:15:af:56 brd ff:ff:ff:ff:ff:ff
5: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether a2:bb:78:7e:35:4b brd ff:ff:ff:ff:ff:ff
21: public: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP qlen 1000
link/ether 50:3e:aa:4c:9b:01 brd ff:ff:ff:ff:ff:ff
inet6 fe80::523e:aaff:fe4c:9b01/64 scope link
valid_lft forever preferred_lft forever
22: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP qlen 1000
link/ether 78:f2:9e:90:bc:64 brd ff:ff:ff:ff:ff:ff
inet 10.0.1.18/24 brd 10.0.1.255 scope global ovirtmgmt
valid_lft forever preferred_lft forever
inet6 fe80::7af2:9eff:fe90:bc64/64 scope link
valid_lft forever preferred_lft forever
23: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 qdisc
noqueue master ovs-system state UNKNOWN qlen 1000
link/ether 02:c0:7a:e3:4e:76 brd ff:ff:ff:ff:ff:ff
inet6 fe80::c0:7aff:fee3:4e76/64 scope link
valid_lft forever preferred_lft forever
24: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
qlen 1000
link/ether a2:2f:f2:58:88:da brd ff:ff:ff:ff:ff:ff
26: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master ovs-system state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:03 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:103/64 scope link
valid_lft forever preferred_lft forever
29: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master ovirtmgmt state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:05 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:105/64 scope link
valid_lft forever preferred_lft forever
[root@o2 ~]# ovs-vsctl show
6be6d37c-74cf-485e-9957-f8eb4bddb2ca
Bridge br-int
fail_mode: secure
Port br-int
Interface br-int
type: internal
Port "ovn-972f1b-0"
Interface "ovn-972f1b-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.0.1.21"}
Port "vnet0"
Interface "vnet0"
ovs_version: "2.9.0"
[root@o3 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s31f6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovirtmgmt state UP qlen 1000
link/ether 78:f2:9e:90:bc:50 brd ff:ff:ff:ff:ff:ff
3: enp0s20f0u5c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master public state UNKNOWN qlen 1000
link/ether 50:3e:aa:4c:9c:03 brd ff:ff:ff:ff:ff:ff
4: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen
1000
link/ether 7e:43:c1:b0:48:73 brd ff:ff:ff:ff:ff:ff
5: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 3a:fe:68:34:31:4c brd ff:ff:ff:ff:ff:ff
21: public: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP qlen 1000
link/ether 50:3e:aa:4c:9c:03 brd ff:ff:ff:ff:ff:ff
inet6 fe80::523e:aaff:fe4c:9c03/64 scope link
valid_lft forever preferred_lft forever
22: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP qlen 1000
link/ether 78:f2:9e:90:bc:50 brd ff:ff:ff:ff:ff:ff
inet 10.0.1.21/24 brd 10.0.1.255 scope global ovirtmgmt
valid_lft forever preferred_lft forever
inet6 fe80::7af2:9eff:fe90:bc50/64 scope link
valid_lft forever preferred_lft forever
24: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
qlen 1000
link/ether 02:92:3f:89:f2:c7 brd ff:ff:ff:ff:ff:ff
25: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master ovirtmgmt state UNKNOWN qlen 1000
link/ether fe:16:3e:0b:b1:2d brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc16:3eff:fe0b:b12d/64 scope link
valid_lft forever preferred_lft forever
27: vnet2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master ovirtmgmt state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:0b brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:10b/64 scope link
valid_lft forever preferred_lft forever
29: vnet4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master ovs-system state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:0c brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:10c/64 scope link
valid_lft forever preferred_lft forever
31: vnet6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master ovirtmgmt state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:07 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:107/64 scope link
valid_lft forever preferred_lft forever
32: vnet7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master public state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:09 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:109/64 scope link
valid_lft forever preferred_lft forever
33: vnet8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master ovs-system state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:0a brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:10a/64 scope link
valid_lft forever preferred_lft forever
34: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 qdisc
noqueue master ovs-system state UNKNOWN qlen 1000
link/ether 46:88:1c:22:6f:c3 brd ff:ff:ff:ff:ff:ff
inet6 fe80::4488:1cff:fe22:6fc3/64 scope link
valid_lft forever preferred_lft forever
[root@o3 ~]# ovs-vsctl show
8c2c19fc-d9e4-423d-afcb-f5ecff602ca7
Bridge br-int
fail_mode: secure
Port "vnet4"
Interface "vnet4"
Port "ovn-049183-0"
Interface "ovn-049183-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.0.1.18"}
Port "vnet8"
Interface "vnet8"
Port br-int
Interface br-int
type: internal
ovs_version: "2.9.0"
Best regards,
Samuli
Marcin Mirecki wrote:
Hi Samuli,
Let's first make sure the configuration is correct.
How did you configure the env? Did you use the automatic engine-setup
configuration?
Can you please send me the output of the following:
on engine:
ovn-sbctl show
ovn-nbctl show
on hosts:
ip addr
ovs-vsctl show
The 'vdsm-tool ovn-config' command configures the ovn controller to use the
first ip as the ovn central, and the local tunnel to use the second one.
Regards,
Marcin
On Sun, May 6, 2018 at 10:42 AM, Samuli Heinonen<samppah(a)neutraali.net>
wrote:
> Hi all,
>
> I'm building a home lab using oVirt+GlusterFS in hyperconverged(ish) setup.
>
> My setup consists of 2x nodes with ASRock H110M-STX motherboard, Intel
> Pentium G4560 3,5 GHz CPU and 16 GB RAM. Motherboard has integrated Intel
> Gigabit I219V LAN. At the moment I'm using RaspberryPi as Gluster arbiter
> node. Nodes are connected to basic "desktop switch" without any management
> available.
>
> Hardware is nowhere near perfect, but it get its job done and is enough
> for playing around. However I'm having problems getting OVN to work
> properly and I'm clueless where to look next.
>
> oVirt is setup like this:
> oVirt engine host oe / 10.0.1.101
> oVirt hypervisor host o2 / 10.0.1.18
> oVirt hypervisor host o3 / 10.0.1.21
> OVN network 10.0.200.0/24
>
> When I spin up a VM in o2 and o3 with IP address in network 10.0.1.0/24
> everything works fine. VMs can interact between each other without any
> problems.
>
> Problems show up when I try to use OVN based network between virtual
> machines. If virtual machines are on same hypervisor then everything seems
> to work ok. But if I have virtual machine on hypervisor o2 and another one
> on hypervisor o3 then TCP connections doesn't work very well. UDP seems to
> be ok and it's possible to ping hosts, do dns& ntp queries and so on.
>
> Problem with TCP is that for example when taking SSH connection to another
> host at some point connection just hangs and most of the time it's not even
> possible to even log in before connectiong hangs. If I look into tcpdump at
> that point it looks like packets never reach destination. Also, if I have
> multiple connections, then all of them hang at the same time.
>
> I have tried switching off tx checksum and other similar settings, but it
> didn't make any difference.
>
> I'm suspecting that hardware is not good enough. Before investigating into
> new hardware I'd like to get some confirmation that everything is setup
> correctly.
>
> When setting up oVirt/OVN I had to run following undocumented command to
> get it working at all: vdsm-tool ovn-config 10.0.1.101 10.0.1.21 (oVirt
> engine IP, hypervisor IP). Especially this makes me think that I have
> missed some crucial part in configuration.
>
> On oVirt engine in /var/log/openvswitch/ovsdb-server-nb.log there are
> error messages:
> 2018-05-06T08:30:05.418Z|00913|stream_ssl|WARN|SSL_read: unexpected SSL
> connection close
> 2018-05-06T08:30:05.418Z|00914|jsonrpc|WARN|ssl:127.0.0.1:53152: receive
> error: Protocol error
> 2018-05-06T08:30:05.419Z|00915|reconnect|WARN|ssl:127.0.0.1:53152:
> connection dropped (Protocol error)
>
> To be honest, I'm not sure what's causing those error messages or are they
> related. I found out some bug reports stating that they are not critical.
>
> Any ideas what to do next or should I just get better hardware? :)
>
> Best regards,
> Samuli Heinonen
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>