Hi Henni,
your issue is just here:
2020-10-16 11:20:59,445+0200 DEBUG var changed: host "localhost" var
"hostname_resolution_output" type "<class 'dict'>"
value: "{
"changed": true,
"cmd": "getent ahosts node01.xyz.co.za | grep STREAM",
"delta": "0:00:00.004671",
"end": "2020-10-16 11:20:59.179399",
"failed": false,
"rc": 0,
"start": "2020-10-16 11:20:59.174728",
"stderr": "",
"stderr_lines": [],
"stdout": "156.38.192.226 STREAM node01.xyz.co.za",
"stdout_lines": [
"156.38.192.226 STREAM node01.xyz.co.za"
]
}"
but then...
2020-10-16 12:15:43,079+0200 DEBUG var changed: host "localhost" var
"he_vm_ip_addr" type "<class
'ansible.parsing.yaml.objects.AnsibleUnicode'>" value:
""156.38.192.226""
2020-10-16 12:15:43,079+0200 DEBUG var changed: host "localhost" var
"he_vm_ip_prefix" type "<class 'int'>" value:
"29"
...
2020-10-16 12:15:43,079+0200 DEBUG var changed: host "localhost" var
"he_cloud_init_host_name" type "<class
'ansible.parsing.yaml.objects.AnsibleUnicode'>" value:
""engine01""
2020-10-16 12:15:43,079+0200 DEBUG var changed: host "localhost" var
"he_cloud_init_domain_name" type "<class
'ansible.parsing.yaml.objects.AnsibleUnicode'>" value:
""xyz.co.za""
So,
your host is named node01.xyz.co.za and it resolves to 156.38.192.226,
then you are trying to create a VM named engine01.xyz.co.za and you are
trying to configure it with a static set IPv4 address which is
still 156.38.192.226.
This is enough to explain all the subsequent networking issues.
Please try again using two distinct IP addresses for the node and the
engine VM.
ciao,
Simone
On Sat, Oct 24, 2020 at 8:35 AM <info(a)worldhostess.com> wrote:
File 1
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20201024072802-qzvr7t.log
2020-10-24 08:10:14,990+0200 ERROR otopi.plugins.gr_he_common.core.misc
misc._terminate:167 Hosted Engine deployment failed: please check the logs
for the issue, fix accordingly or re-deploy from scratch.
2020-10-24 08:10:14,990+0200 DEBUG otopi.plugins.otopi.dialog.human
dialog.__logString:204 DIALOG:SEND \
Yours Sincerely,
*Henni *
*From:* info(a)worldhostess.com <info(a)worldhostess.com>
*Sent:* Saturday, 24 October 2020 14:03
*To:* 'Yedidyah Bar David' <didi(a)redhat.com>
*Cc:* 'Edward Berger' <edwberger(a)gmail.com>; 'users'
<users(a)ovirt.org>
*Subject:* [ovirt-users] Re: 20+ Fresh Installs Failing in 20+ days
[newbie & frustrated]
Can anyone explain to me how to use the “screen -d -r” option
Start the deployment script:
# hosted-engine --deploy
To escape the script at any time, use the Ctrl+D keyboard combination to
abort deployment. In the event of session timeout or connection disruption,
run screen -d -r to recover the deployment session.
Yours Sincerely,
*Henni *
*From:* Yedidyah Bar David <didi(a)redhat.com>
*Sent:* Wednesday, 21 October 2020 15:04
*To:* info(a)worldhostess.com
*Cc:* Edward Berger <edwberger(a)gmail.com>; users <users(a)ovirt.org>
*Subject:* [ovirt-users] Re: 20+ Fresh Installs Failing in 20+ days
[newbie & frustrated]
On Wed, Oct 21, 2020 at 4:19 AM <info(a)worldhostess.com> wrote:
Did you try to ssh to the engine VM?
ssh is disconnecting within 1 second to 30 seconds, impossible to
perform anything.
ssh to the host? Or to the engine vm?
If to the host, then you have some severe networking issues, I suggest to
handle this first.
Command line install " hosted-engine --deploy" it gets to this point (see
below) and disconnect and thereafter it is disconnecting ssh and http://
FQDN:9090
"[ INFO ] TASK [ovirt.hosted_engine_setup : Check engine VM health]"
https "Certificate invalid"
after I run " /usr/sbin/ovirt-hosted-engine-cleanup" I am able to ssh
Yours Sincerely,
Henni
-----Original Message-----
From: Yedidyah Bar David <didi(a)redhat.com>
Sent: Tuesday, 20 October 2020 14:05
To: info(a)worldhostess.com
Cc: Edward Berger <edwberger(a)gmail.com>; users <users(a)ovirt.org>
Subject: [ovirt-users] Re: 20+ Fresh Installs Failing in 20+ days [newbie
& frustrated]
On Mon, Oct 19, 2020 at 6:00 PM <info(a)worldhostess.com> wrote:
>
> I used Cockpit web interface to do the install and I crashed again. I
think it did not do the final part of the install. There are no other files
such as "engine-side logs"
Did you try to ssh to the engine VM?
Do you see it running on the host?
>
> It keep disconnecting from the Cockpit
Due to env issues (communication etc.)? Or oVirt-specific ones (bugs)?
We do have an open bug about allowing to reconnect to cockpit in such
cases, but it's still NEW for several years now:
https://bugzilla.redhat.com/show_bug.cgi?id=1422544
>
> This is my problem for the last few weeks, it will not complete the
install and I have no idea why.
If this is your only problem, I suggest to try and work around it somehow:
Either by running the browser through which you connect to cockpit in some
machine closer (network-wise) to the host you install on (and connect to
that machine from your laptop using means that allow reconnection, some
remote desktop or whatever), or using the command line tool/guide, which
you can/should run inside tmux (and thus easily reconnect if needed).
Good luck and best regards,
>
> Yours Sincerely,
>
> Henni
>
>
> -----Original Message-----
> From: Yedidyah Bar David <didi(a)redhat.com>
> Sent: Monday, 19 October 2020 14:58
> To: info(a)worldhostess.com
> Cc: Edward Berger <edwberger(a)gmail.com>; users <users(a)ovirt.org>
> Subject: [ovirt-users] Re: 20+ Fresh Installs Failing in 20+ days
> [newbie & frustrated]
>
> Hi,
>
> On Fri, Oct 16, 2020 at 4:44 PM <info(a)worldhostess.com> wrote:
> >
> > Another zip file from fresh Centos & Ovirt install
> >
> > The following directories and files are included 1. openvswitch 2.
> > ovirt-hosted-engine-ha 3. ovirt-hosted-engine-setup 4. ovirt-imageio
> > 5. vdsm 6. firewalld
> >
> >
https://drive.google.com/file/d/1QXj2eiNYseJvTVwmlDp8qwIWg64t45Sc/vi
> > ew
> > ?usp=sharing
>
> Thanks.
>
> It's still the same problem ("Check engine VM health" failed) and the
zip still does not include engine-side logs (either from the engine vm
itself or from subdirs of /var/log/ovirt-hosted-engine-setup). Please
check/share these.
>
> Also, the files' timestamps are not kept, so 'ls -ltr' does not show
them in the correct order. Is there a problem with simply using 'tar' as I
suggested?
>
> Thanks and best regards,
> --
> Didi
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org Privacy
> Statement:
https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
>
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OSV5JYVZ
> TMAJJ7L4O4XHAIBWDL5VKZNP/
>
--
Didi
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement:
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GNHTNCLXXXQ...
--
Didi
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement:
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HAJZOHSBPME...