Re: [ovirt-users] Hosted-engine-Issue

HI I thought Its promiscuous mode issue ,after reboot of engine unable to reach again ? is there anyways to resolve ?

Thanks, Nagaraju On Fri, Apr 22, 2016 at 11:45 AM, Budur Nagaraju <nbudoor(a)gmail.com&gt; wrote: > > I found the solution ,promiscuous mode was rejecting the packets this was > causing the issue ,enabled and now able to ping without any issues. > Thanks for the support ! > > On Fri, Apr 22, 2016 at 8:39 AM, Budur Nagaraju <nbudoor(a)gmail.com&gt; wrote: >> >> HI >> >> Any updates issue is blocking ? >> >> Thanks, >> Nagaraju >> >> >> On Thu, Apr 21, 2016 at 7:20 PM, Budur Nagaraju <nbudoor(a)gmail.com&gt; >> wrote: >>> >>> Below are the details, unable to ping the gateway from the ovirt engine >>> ,able to ping the ovirt engine from host as both are there in the same >>> network. >>> >>> >>> [root@oe ~]# ip addr >>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN >>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >>> inet 127.0.0.1/8 scope host lo >>> inet6 ::1/128 scope host >>> valid_lft forever preferred_lft forever >>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast >>> state UP qlen 1000 >>> link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff >>> inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0 >>> inet6 fe80::216:3eff:fe33:38e5/64 scope link >>> valid_lft forever preferred_lft forever >>> [root@oe ~]# >>> [root@oe ~]# >>> [root@oe ~]# >>> [root@oe ~]# ip route >>> 10.206.66.0/23 dev eth0 proto kernel scope link src 10.206.66.9 >>> 169.254.0.0/16 dev eth0 scope link metric 1002 >>> default via 10.206.67.254 dev eth0 >>> [root@oe ~]# >>> [root@oe ~]# >>> [root@oe ~]# >>> [root@oe ~]# brctl show >>> bridge name bridge id STP enabled interfaces >>> [root@oe ~]# >>> >>> >>> >>> >>> >>> >>> On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <didi(a)redhat.com&gt; >>> wrote: >>>> >>>> On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbudoor(a)gmail.com&gt; >>>> wrote: >>>> > HI >>>> > >>>> > Installed hosted engine and after configuring IP to ovirt engine >>>> > unable to >>>> > ping the gateway and found that there is no issue with the Network . >>>> >>>> You mean that from inside the engine machine, you cannot ping the >>>> gateway? >>>> >>>> Can you ping it from the host? >>>> >>>> Please share output of these commands, from both the host and the >>>> engine vm: >>>> >>>> ip addr >>>> ip route >>>> brctl show >>>> >>>> Thanks, >>>> >>>> > >>>> > Is there any thing am missing while installing Hosted engine ? below >>>> > is >>>> > output details, >>>> > >>>> > >>>> > --== CONFIGURATION PREVIEW ==-- >>>> > >>>> > Engine FQDN : oe.bnglab.psecure.net >>>> > Bridge name : ovirtmgmt >>>> > SSH daemon port : 22 >>>> > Gateway address : 10.206.67.254 >>>> > Host name for web application : hosted_engine_1 >>>> > Host ID : 1 >>>> > Image alias : hosted_engine >>>> > Image size GB : 25 >>>> > Storage connection : >>>> > 10.204.207.152:/home/heoe >>>> > Console type : vnc >>>> > Memory size MB : 4096 >>>> > MAC address : 00:16:3e:2f:5c:40 >>>> > Boot type : cdrom >>>> > Number of CPUs : 2 >>>> > ISO image (for cdrom boot) : >>>> > /ovirt/CentOS-6.7-x86_64-minimal.iso >>>> > CPU Type : model_SandyBridge >>>> > >>>> > Please confirm installation settings (Yes, No)[Yes]: yes >>>> > [ INFO ] Stage: Transaction setup >>>> > [ INFO ] Stage: Misc configuration >>>> > [ INFO ] Stage: Package installation >>>> > [ INFO ] Stage: Misc configuration >>>> > [ INFO ] Configuring libvirt >>>> > [ INFO ] Configuring VDSM >>>> > [ INFO ] Starting vdsmd >>>> > [ INFO ] Waiting for VDSM hardware info >>>> > [ INFO ] Waiting for VDSM hardware info >>>> > [ INFO ] Creating Storage Domain >>>> > [ INFO ] Creating Storage Pool >>>> > [ INFO ] Connecting Storage Pool >>>> > [ INFO ] Verifying sanlock lockspace initialization >>>> > [ INFO ] Creating VM Image >>>> > [ INFO ] Disconnecting Storage Pool >>>> > [ INFO ] Start monitoring domain >>>> > [ INFO ] Configuring VM >>>> > [ INFO ] Updating hosted-engine configuration >>>> > [ INFO ] Stage: Transaction commit >>>> > [ INFO ] Stage: Closing up >>>> > The following network ports should be opened: >>>> > tcp:5900 >>>> > tcp:5901 >>>> > udp:5900 >>>> > udp:5901 >>>> > An example of the required configuration for iptables can >>>> > be found >>>> > at: >>>> > /etc/ovirt-hosted-engine/iptables.example >>>> > In order to configure firewalld, copy the files from >>>> > /etc/ovirt-hosted-engine/firewalld to >>>> > /etc/firewalld/services >>>> > and execute the following commands: >>>> > firewall-cmd -service hosted-console >>>> > [ INFO ] Creating VM >>>> > You can now connect to the VM with the following command: >>>> > /usr/bin/remote-viewer vnc://localhost:5900 >>>> > Use temporary password "2049ZfXr" to connect to vnc >>>> > console. >>>> > Please note that in order to use remote-viewer you need to >>>> > be able >>>> > to run graphical applications. >>>> > This means that if you are using ssh you have to supply the >>>> > -Y >>>> > flag (enables trusted X11 forwarding). >>>> > Otherwise you can run the command from a terminal in your >>>> > preferred desktop environment. >>>> > If you cannot run graphical applications you can connect to >>>> > the >>>> > graphic console from another host or connect to the console using the >>>> > following command: >>>> > virsh -c qemu+tls://Test/system console HostedEngine >>>> > If you need to reboot the VM you will need to start it >>>> > manually >>>> > using the command: >>>> > hosted-engine --vm-start >>>> > You can then set a temporary password using the command: >>>> > hosted-engine --add-console-password >>>> > The VM has been started. Install the OS and shut down or >>>> > reboot >>>> > it. To continue please make a selection: >>>> > >>>> > (1) Continue setup - VM installation is complete >>>> > (2) Reboot the VM and restart installation >>>> > (3) Abort setup >>>> > (4) Destroy VM and abort setup >>>> > >>>> > _______________________________________________ >>>> > Users mailing list >>>> > Users(a)ovirt.org >>>> > http://lists.ovirt.org/mailman/listinfo/users >>>> > >>>> >>>> >>>> >>>> -- >>>> Didi >>> >>> >> > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users