[ovirt-users] Re: Gluster & Hyper Converged setup

Hi, I believe I need to create a Storage Block which I was unaware of as I thought one would be able to use part of the free space on the disks automatically provisioned by the node installer, I believe this requires a reinstall and creation of a new volume or reduce the current size of the volume used and create a new volume on the live system. Additionally on another note how do I remove my email address from showing on posts this is not great to have it showing. that file you wanted is below... [root@ovirt1 ~]# cat /etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/vg_create.yml --- # We have to set the dataalignment for physical volumes, and physicalextentsize # for volume groups. For JBODs we use a constant alignment value of 256K # however, for RAID we calculate it by multiplying the RAID stripe unit size # with the number of data disks. Hence in case of RAID stripe_unit_size and data # disks are mandatory parameters. - name: Check if valid disktype is provided fail: msg: "Unknown disktype. Allowed disktypes: JBOD, RAID6, RAID10, RAID5." when: gluster_infra_disktype not in [ 'JBOD', 'RAID6', 'RAID10', 'RAID5' ] # Set data alignment for JBODs, by default it is 256K. This set_fact is not # needed if we can always assume 256K for JBOD, however we provide this extra # variable to override it. - name: Set PV data alignment for JBOD set_fact: pv_dataalign: "{{ gluster_infra_dalign | default('256K') }}" when: gluster_infra_disktype == 'JBOD' # Set data alignment for RAID # We need KiB: ensure to keep the trailing `K' in the pv_dataalign calculation. - name: Set PV data alignment for RAID set_fact: pv_dataalign: > {{ gluster_infra_diskcount|int * gluster_infra_stripe_unit_size|int }}K when: > gluster_infra_disktype == 'RAID6' or gluster_infra_disktype == 'RAID10' or gluster_infra_disktype == 'RAID5' - name: Set VG physical extent size for RAID set_fact: vg_pesize: > {{ gluster_infra_diskcount|int * gluster_infra_stripe_unit_size|int }}K when: > gluster_infra_disktype == 'RAID6' or gluster_infra_disktype == 'RAID10' or gluster_infra_disktype == 'RAID5' # Tasks to create a volume group # The devices in `pvs' can be a regular device or a VDO device - name: Create volume groups lvg: state: present vg: "{{ item.vgname }}" pvs: "{{ item.pvname }}" pv_options: "--dataalignment {{ pv_dataalign }}" # pesize is 4m by default for JBODs pesize: "{{ vg_pesize | default(4) }}" with_items: "{{ gluster_infra_volume_groups }}"