[ovirt-users] Re: oVirt node loses gluster volume UUID after reboot, goes to emergency mode every time I reboot.

This only started to happen with oVirt node 4.3, 4.2 didn't have issue. Since I updated to 4.3, every reboot the host goes into emergency mode. First few times this happened I re-installed O/S from scratch, but after some digging I found out that the drives it mounts in /etc/fstab cause the problem, specifically these mounts. All three are single drives, one is an SSD and the other 2 are individual NVME drives. UUID=732f939c-f133-4e48-8dc8-c9d21dbc0853 /gluster_bricks/storage_nvme1 auto defaults 0 0 UUID=5bb67f61-9d14-4d0b-8aa4-ae3905276797 /gluster_bricks/storage_ssd auto defaults 0 0 UUID=f55082ca-1269-4477-9bf8-7190f1add9ef /gluster_bricks/storage_nvme2 auto defaults 0 0 In order to get the host to actually boot, I have to go to console, delete those mounts, reboot, and then re-add them, and they end up with new UUIDs. all of these hosts reliably rebooted in 4.2 and earlier, but all the versions of 4.3 have this same problem (I keep updating to hope issue is fixed). _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/I4UKZAWPQDX...