[ovirt-users] Re: Resize partition cause oVirt installation failed
Are you using the oVirt node ?
If you use custom setup, you need to have the same partitions/LVs that are used by
default .
Can you give a screenshot of the installer?
Best Regards,
Strahil Nikolov
На 3 август 2020 г. 16:28:02 GMT+03:00, Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
написа:
>On Mon, Aug 3, 2020 at 2:58 PM hkexdong--- via Users <users(a)ovirt.org>
>wrote:
>
>> I've 2 x 512GB SSD. Purely for oVirt 4.4.1 (CentOS 8.2) installation.
>> Using auto partitioning will assign 800+ GB to root partition. I
>think
>> that's too much so manually reduce it to 80 GB.
>> As there are 2 disks. I want to form RAID too. So, I manually change
>all
>> the partitions from "LVM thin provisioning" to "RAID" (with
RAID 1).
>> Eventually, cause the installation failed with a message "There was
>an
>> error running the kickstart script at line ....."
>> If I don't make any change to the partitions. The installation
>success.
>> Is this a known issue? oVirt not allow resize partition and using
>Linux
>> software RAID?
>>
>>
>I posted similar problems during 4.4 beta phase:
>https://lists.ovirt.org/archives/list/users@ovirt.org/message/F5PD5LSQB5WNZCF2J7TDG3OKQL74WSXW/
>
>so that at that time it happened that changing fs type and/or partition
>layout gave problems.
>No clear answer received... I fear that is a limitation
>Gianluca