11:58 a.m.
------=_Part_749_10601151.1361552341446
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
I notice that vdsm service is not running:=20
systemctl status vdsmd.service=20
vdsmd.service - Virtual Desktop Server Manager=20
Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled)=20
Active: failed (Result: exit-code) since Fri 2013-02-22 16:42:24 WET; 1min =
45s ago=20
Process: 1880 ExecStart=3D/lib/systemd/systemd-vdsmd start (code=3Dexited, =
status=3D1/FAILURE)=20
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2=20
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2=20
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2=20
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2=20
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2=20
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2=20
Feb 22 16:42:24 node2.acloud.pt systemd-vdsmd[1880]: vdsm: Failed to define=
network filters on libvirt[FAILED]=20
Feb 22 16:42:24 node2.acloud.pt systemd[1]: vdsmd.service: control process =
exited, code=3Dexited status=3D1=20
Feb 22 16:42:24 node2.acloud.pt systemd[1]: Failed to start Virtual Desktop=
Server Manager.=20
Feb 22 16:42:24 node2.acloud.pt systemd[1]: Unit vdsmd.service entered fail=
ed state=20
rpm -qa|grep vdsm=20
vdsm-python-4.10.3-8.fc18.x86_64=20
vdsm-gluster-4.10.3-8.fc18.noarch=20
vdsm-4.10.3-8.fc18.x86_64=20
vdsm-xmlrpc-4.10.3-8.fc18.noarch=20
vdsm-cli-4.10.3-8.fc18.noarch=20
----- Mensagem original -----
De: suporte(a)logicworks.pt=20
Para: users(a)ovirt.org=20
Enviadas: Sexta-feira, 22 de Fevereiro de 2013 15:35:49=20
Assunto: Re: [Users] Fwd: Re: Permission issues=20
Hi,=20
I cannot install a F18 host=20
I installed a minimal F18 than=20
yum install net-tools=20
systemctl stop NetworkManager.service systemctl disable NetworkManager.serv=
ice=20
add a gateway to /etc/sysconfig/network=20
remove /usr/lib/udev/rules.d/60-net.rules=20
systemctl=C2=A0enable=C2=A0network.service=20
systemctl=C2=A0start=C2=A0network.service=20
chkconfig network on=20
reboot=20
rpm -qa|grep systemd=20
systemd-sysv-197-1.fc18.2.x86_64=20
systemd-197-1.fc18.2.x86_64=20
systemd-libs-197-1.fc18.2.x86_64=20
SELinux is disabled=20
yum localinstall http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm=
=20
Than I add it to the engine via portal=20
Get no error during the install, but never get out from the " This host is =
in non responding=20
state"=20
Did I miss something?=20
Thanks=20
Jose=20
iptables -L=20
Chain INPUT (policy ACCEPT)=20
target prot opt source destination=20
ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED=20
ACCEPT all -- anywhere anywhere=20
ACCEPT tcp -- anywhere anywhere tcp dpt:54321=20
ACCEPT tcp -- anywhere anywhere tcp dpt:ssh=20
ACCEPT udp -- anywhere anywhere udp dpt:snmp=20
ACCEPT tcp -- anywhere anywhere tcp dpt:16514=20
ACCEPT tcp -- anywhere anywhere multiport dports xprtld:6166=20
ACCEPT tcp -- anywhere anywhere multiport dports 49152:49216=20
ACCEPT tcp -- anywhere anywhere tcp dpt:24007=20
ACCEPT udp -- anywhere anywhere udp dpt:sunrpc=20
ACCEPT tcp -- anywhere anywhere tcp dpt:38465=20
ACCEPT tcp -- anywhere anywhere tcp dpt:38466=20
ACCEPT tcp -- anywhere anywhere tcp dpt:38467=20
ACCEPT tcp -- anywhere anywhere tcp dpt:39543=20
ACCEPT tcp -- anywhere anywhere tcp dpt:55863=20
ACCEPT tcp -- anywhere anywhere tcp dpt:38468=20
ACCEPT udp -- anywhere anywhere udp dpt:963=20
ACCEPT tcp -- anywhere anywhere tcp dpt:965=20
ACCEPT tcp -- anywhere anywhere tcp dpt:ctdb=20
ACCEPT tcp -- anywhere anywhere tcp dpt:netbios-ssn=20
ACCEPT tcp -- anywhere anywhere tcp dpt:microsoft-ds=20
ACCEPT tcp -- anywhere anywhere tcp dpts:24009:24108=20
REJECT all -- anywhere anywhere reject-with icmp-host-prohibited=20
Chain FORWARD (policy ACCEPT)=20
target prot opt source destination=20
REJECT all -- anywhere anywhere PHYSDEV match ! --physdev-is-bridged reject=
-with icmp-host-prohibited=20
Chain OUTPUT (policy ACCEPT)=20
target prot opt source destination=20
----- Mensagem original -----
De: "Jeff Bailey" <bailey(a)cs.kent.edu>=20
Para: users(a)ovirt.org=20
Enviadas: Quarta-feira, 20 de Fevereiro de 2013 21:50:38=20
Assunto: Re: [Users] Fwd: Re: Permission issues=20
On 2/20/2013 2:55 PM, suporte(a)logicworks.pt wrote:=20
How can I update systemd in the node?=20
You would need to install from a newer node iso. If you don't want to=20
wait, you could install a minimal F18, configure your networking, add=20
the ovirt repo and then just add that host using the engine GUI. At=20
this stage, you will still have the same problem you currently have.=20
You then need to:=20
yum --enablerepo=3Dupdates-testing update systemd=20
After that, remove /usr/lib/udev/rules.d/60-net.rules <- typing from=20
memory but should be close=20
Reboot and everything *should* work :)=20
There are other little things like disabling firewalld, tweeking=20
multipath.conf, etc that I do but the steps above basically cover it.=20
Thanks=20
=20
----- Mensagem original -----=20
De: "Kevin Maziere Aubry" <kevin.maziere(a)alterway.fr>=20
Para: "Jakub Bittner" <j.bittner(a)nbu.cz>=20
Cc: "users" <users(a)ovirt.org>=20
Enviadas: Quarta-feira, 20 Fevereiro, 2013 17:48:29=20
Assunto: Re: [Users] Fwd: Re: Permission issues=20
=20
=20
=20
Sur.=20
I update systemd and remove udev network conf file.=20
I also stop network manager and add gateway to /etc/sysconfig/network.=20
=20
Also I set dns manager name to /etc/hosts file to avoid dns issue.=20
=20
It works ;)=20
Le 20 f=C3=A9vr. 2013 18:42, "Jakub Bittner" < j.bittner(a)nbu.cz > a =C3=
=A9crit :=20
=20
=20
I wonder if is there any way to create ovirt-node from running Fedora 18 =
netinstalled server. Do anybody know what packages should I install?=20
=20
Thanks=20
______________________________ _________________=20
Users mailing list=20
Users(a)ovirt.org=20
http://lists.ovirt.org/ mailman/listinfo/users=20
=20
_______________________________________________=20
Users mailing list=20
Users(a)ovirt.org=20
http://lists.ovirt.org/mailman/listinfo/users=20
_______________________________________________=20
Users mailing list=20
Users(a)ovirt.org=20
http://lists.ovirt.org/mailman/listinfo/users=20
_______________________________________________=20
Users mailing list=20
Users(a)ovirt.org=20
http://lists.ovirt.org/mailman/listinfo/users=20
_______________________________________________=20
Users mailing list=20
Users(a)ovirt.org=20
http://lists.ovirt.org/mailman/listinfo/users=20
------=_Part_749_10601151.1361552341446
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><style type=3D'text/css'>p { margin: 0;
}</style></head><body><=
div style=3D'font-family: verdana,helvetica,sans-serif; font-size: 10pt; co=
lor: #330066'>I notice that vdsm service is not running:<br>systemctl statu=
s vdsmd.service<br>vdsmd.service - Virtual Desktop Server
Manager<br> =
Loaded:
loaded (/usr/lib/s=
ystemd/system/vdsmd.service;
enabled)<br> &nbs=
p; Active: failed (Result: exit-code) since Fri 2013-02-2=
2 16:42:24 WET; 1min 45s
ago<br> &=
nbsp; Process: 1880 ExecStart=3D/lib/systemd/systemd-vdsmd start (code=3Dex=
ited, status=3D1/FAILURE)<br><br>Feb 22 16:42:24 node2.acloud.pt python[201=
1]: DIGEST-MD5 client step 2<br>Feb 22 16:42:24 node2.acloud.pt python[2011=
]: DIGEST-MD5 client step 2<br>Feb 22 16:42:24 node2.acloud.pt python[2011]=
: DIGEST-MD5 client step 2<br>Feb 22 16:42:24 node2.acloud.pt python[2011]:=
DIGEST-MD5 client step 2<br>Feb 22 16:42:24 node2.acloud.pt python[2011]: =
DIGEST-MD5 client step 2<br>Feb 22 16:42:24 node2.acloud.pt python[2011]: D=
IGEST-MD5 client step 2<br>Feb 22 16:42:24 node2.acloud.pt systemd-vdsmd[18=
80]: vdsm: Failed to define network filters on libvirt[FAILED]<br>Feb 22 16=
:42:24 node2.acloud.pt systemd[1]: vdsmd.service: control process exited, c=
ode=3Dexited status=3D1<br>Feb 22 16:42:24 node2.acloud.pt systemd[1]: Fail=
ed to start Virtual Desktop Server Manager.<br>Feb 22 16:42:24 node2.acloud=
.pt systemd[1]: Unit vdsmd.service entered failed state<br><br> rpm
-q=
a|grep vdsm
<br>vdsm-python-4.10.3-8.fc18.x86=
_64<br>vdsm-gluster-4.10.3-8.fc18.noarch<br>vdsm-4.10.3-8.fc18.x86_64<br>vd=
sm-xmlrpc-4.10.3-8.fc18.noarch<br>vdsm-cli-4.10.3-8.fc18.noarch<br><br><br>=
<br><hr id=3D"zwchr"><div style=3D"color: rgb(0, 0, 0);
font-weight: normal=
; font-style: normal; text-decoration: none; font-family: Helvetica,Arial,s=
ans-serif; font-size: 12pt;"><b>De:
</b>suporte(a)logicworks.pt<br><b>Para: <=
/b>users(a)ovirt.org<br><b>Enviadas: </b>Sexta-feira, 22 de Fevereiro
de 2013=
15:35:49<br><b>Assunto: </b>Re: [Users] Fwd: Re: Permission
issues<br><br>=
<style>p { margin: 0; }</style><div style=3D"font-family:
verdana,helvetica=
,sans-serif; font-size: 10pt; color: rgb(51, 0, 102);">Hi,<br><br>I
cannot =
install a F18 host<br><br>I installed a minimal F18 than<br><span
style=3D"=
font-size: 12pt; line-height: 115%; font-family: "Calibri","=
sans-serif";" lang=3D"EN-US">yum
install net-tools<br></span><pre><span style=3D"font-size: 12pt;
font-famil=
y: "Calibri","sans-serif";"
lang=3D"EN-US">systemctl st=
op NetworkManager.service</span></pre><pre><span style=3D""
lang=3D"EN-US">=
systemctl disable NetworkManager.service<br><br></span><span
style=3D"" lan=
g=3D"EN-US">add a gateway to /etc/sysconfig/network</span><span
style=3D"" =
lang=3D"EN-US"><br>remove
/usr/lib/udev/rules.d/60-net.rules</span><code><s=
pan style=3D"font-size: 12pt; font-family:
"Calibri","sans-s=
erif"; color: rgb(0, 0, 187);"
lang=3D"EN-US"><br></span></code><code>=
<span style=3D"font-size: 12pt; font-family:
"Calibri","sans=
-serif";"
lang=3D"EN-US">systemctl enable network.service </=
span></code><span style=3D"font-size: 12pt; font-family:
"Calibri"=
;,"sans-serif";"
lang=3D"EN-US"><br><code><span style=3D"font-fam=
ily:
"Calibri","sans-serif";">systemctl start =
;network.service </span></code><br></span><span
style=3D"" lang=3D"EN-=
US">chkconfig network
on</span><br></pre>reboot<br><br>rpm -qa|grep systemd=
<br>systemd-sysv-197-1.fc18.2.x86_64<br>systemd-197-1.fc18.2.x86_64<br>syst=
emd-libs-197-1.fc18.2.x86_64<br><br>SELinux is
disabled<br><br><pre><span s=
tyle=3D"font-size: 12pt;">yum localinstall http://ovirt.org/releases/ovirt-=
release-fedora.noarch.rpm<br><br>Than I add it to the engine via
portal<br>=
Get no error during the install, but never get out from the "</span>This ho=
st is in non responding=20
state"</pre><pre><span style=3D"font-size:
12pt;"><br>Did I miss something?=
<br><br>Thanks<br><br>Jose<br><br><br></span><span
style=3D"font-size: 12pt=
;"></span><br></pre><br> iptables
-L<br>Chain INPUT (policy ACCEPT)<br=
target prot opt
source &nbs=
p;
destination<br>ACC=
EPT all --
anywhere &n=
bsp;
anywhere &n=
bsp;
ctstate RELATED,=
ESTABLISHED<br>ACCEPT all
-- anywhere&n=
bsp;
anyw=
here<br>ACCEPT tcp --
anywhere &nb=
sp;
anywhere&nb=
sp;
tcp d=
pt:54321<br>ACCEPT tcp
-- anywhere =
;
anywher=
e
t=
cp dpt:ssh<br>ACCEPT udp
-- anywhere&nb=
sp;
anywh=
ere =
udp dpt:snmp<br>ACCEPT tcp
-- anywhere=
an=
ywhere &nb=
sp; tcp dpt:16514<br>ACCEPT tcp
-- anyw=
here  =
;
anywhere  =
; multiport dports
xprtld:6166<br>ACCEPT tcp&=
nbsp; --
anywhere &nbs=
p;
anywhere &nbs=
p; multiport dports
49152:49216<br>ACCEPT &nbs=
p; tcp --
anywhere &nb=
sp;
anywhere &nb=
sp; tcp
dpt:24007<br>ACCEPT =
udp --
anywhere  =
;
anywhere  =
; udp
dpt:sunrpc<br>ACCEPT&=
nbsp; tcp --
anywhere =
anywhere =
tcp dpt:38465<br>ACC=
EPT tcp --
anywhere &n=
bsp;
anywhere &n=
bsp;
tcp dpt:38466<br=
ACCEPT tcp
-- anywhere &nbs=
p;
anywhere &nbs=
p;
tcp dpt:3846=
7<br>ACCEPT tcp --
anywhere =
anywhere =
tcp dpt:=
39543<br>ACCEPT tcp --
anywhere &n=
bsp;
anywhere&n=
bsp;
tcp =
dpt:55863<br>ACCEPT tcp
-- anywhere&nbs=
p;
anywhe=
re
=
tcp dpt:38468<br>ACCEPT udp
-- anywhere=
an=
ywhere &nb=
sp; udp dpt:963<br>ACCEPT tcp
-- anywhe=
re
=
anywhere &=
nbsp; tcp dpt:965<br>ACCEPT tcp
-- anyw=
here  =
;
anywhere  =
; tcp dpt:ctdb<br>ACCEPT
tcp -- a=
nywhere &n=
bsp;
anywhere &n=
bsp; tcp dpt:netbios-ssn<br>ACCEPT
tcp =
--
anywhere &nbs=
p;
anywhere &nbs=
p; tcp
dpt:microsoft-ds<br>ACCEPT =
tcp --
anywhere  =
;
anywhere  =
; tcp
dpts:24009:24108<br>REJECT &=
nbsp; all --
anywhere =
anywhere =
reject-with
icmp-host-prohibited=
<br><br>Chain FORWARD (policy
ACCEPT)<br>target pro=
t opt
source &nb=
sp;
destination<br>REJECT all&nbs=
p; --
anywhere &=
nbsp;
anywhere &=
nbsp; PHYSDEV match ! --physdev-is-bridged reject-with ic=
mp-host-prohibited<br><br>Chain OUTPUT (policy
ACCEPT)<br>target  =
; prot opt
source &nbs=
p;
destination<br><br><br><hr id=3D"zwc=
hr"><div style=3D"color: rgb(0, 0, 0); font-weight: normal; font-style:
nor=
mal; text-decoration: none; font-family: Helvetica,Arial,sans-serif; font-s=
ize: 12pt;"><b>De: </b>"Jeff Bailey"
<bailey@cs.kent.edu><br><b>Para:=
</b>users(a)ovirt.org<br><b>Enviadas: </b>Quarta-feira, 20 de
Fevereiro de 2=
013 21:50:38<br><b>Assunto: </b>Re: [Users] Fwd: Re: Permission
issues<br><=
br><br>On 2/20/2013 2:55 PM, suporte(a)logicworks.pt wrote:<br>> How
can I=
update systemd in the node?<br><br>You would need to install from a newer =
node iso. If you don't want to<br>wait, you could install a minimal
F=
18, configure your networking, add<br>the ovirt repo and then just add that=
host using the engine GUI. At<br>this stage, you will still have the=
same problem you currently have. <br>You then need to:<br><br>yum
--enable=
repo=3Dupdates-testing update systemd<br><br>After that, remove /usr/lib/ud=
ev/rules.d/60-net.rules <- typing
from<br>memory but =
should be close<br><br>Reboot and everything *should* work
:)<br><br>There =
are other little things like disabling firewalld, tweeking<br>multipath.con=
f, etc that I do but the steps above basically cover it.<br><br>>
Thanks=
<br>><br>> ----- Mensagem original -----<br>> De:
"Kevin Maziere A=
ubry" &lt;kevin.maziere(a)alterway.fr&gt;<br>&gt; Para: "Jakub
Bittner" <j=
.bittner(a)nbu.cz&gt;<br>&gt; Cc: "users"
&lt;users(a)ovirt.org&gt;<br>&gt; Env=
iadas: Quarta-feira, 20 Fevereiro, 2013 17:48:29<br>> Assunto: Re: [User=
s] Fwd: Re: Permission
issues<br>><br>><br>><br>> Sur.
<br>>=
I update systemd and remove udev network conf file. <br>> I also stop n=
etwork manager and add gateway to /etc/sysconfig/network.
<br>><br>> =
Also I set dns manager name to /etc/hosts file to avoid dns issue. <br>>=
<br>> It works ;) <br>> Le 20 f=C3=A9vr. 2013 18:42, "Jakub
Bittner" =
< j.bittner(a)nbu.cz > a =C3=A9crit :
<br>><br>><br>> I wonder=
if is there any way to create ovirt-node from running Fedora 18 netinstall=
ed server. Do anybody know what packages should I install?
<br>><br>>=
Thanks <br>> ______________________________ _________________
<br>> =
Users mailing list <br>> Users(a)ovirt.org <br>>
http://lists.ovirt.org=
/ mailman/listinfo/users <br>><br>>
_________________________________=
______________<br>> Users mailing list<br>>
Users(a)ovirt.org<br>&gt; h=
ttp://lists.ovirt.org/mailman/listinfo/users<br>> ______________________=
_________________________<br>> Users mailing list<br>>
Users(a)ovirt.or=
g<br>>
http://lists.ovirt.org/mailman/listinfo/users<br><br>________...
___________________________________<br>Users mailing list<br>Users(a)ovirt.or=
g<br>http://lists.ovirt.org/mailman/listinfo/users<br></di...
______________________________________________<br>Users mailing list<br>Use=
rs@ovirt.org<br>http://lists.ovirt.org/mailman/listinfo/users<br></div><br>=
</div></body></html>
------=_Part_749_10601151.1361552341446--