Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
----- Original Message -----
From: "Federico Simoncelli" <fsimonce(a)redhat.com>
To: "Ricardo Esteves" <ricardo.m.esteves(a)gmail.com>
Cc: users(a)ovirt.org
Sent: Wednesday, May 14, 2014 3:47:58 PM
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
----- Original Message -----
> From: "Ricardo Esteves" <ricardo.m.esteves(a)gmail.com>
> To: "Federico Simoncelli" <fsimonce(a)redhat.com>
> Cc: users(a)ovirt.org
> Sent: Wednesday, May 14, 2014 1:45:53 AM
> Subject: RE: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
>
> In attachment follows the defaults and the modified versions of the nodes
> files.
If selecting the relevant host in "Hosts" you see the bnx2i interface in the
"Network Interfaces" subtab, then you can try to:
Sorry I just noticed that you mentioned in the subject that you're using
oVirt 3.2. What I suggested is available only since oVirt 3.4.
--
Federico
1. create a new network in the "Network" tab, "VM
network" checkbox should
be disabled
2. select the relevant host in "Hosts" and use "Setup Host Networks"
in the
"Network Interfaces" subtab
3. configure the bnx2i interface and assign it to the new network you just
created
4. in "iSCSI Multipathing" subtab of tab "Data Center" add a new
entry where
you bind the iscsi connection to the new network you created
Ping me on IRC if you need more help. My nick is fsimonce on #ovirt
--
Federico