6:29 a.m.
It seems that vdsm 4.50.3.4-1.el8 has been pushed to centos-ovirt45 which according to
https://github.com/oVirt/vdsm/blob/master/vdsm.spec.in
# Zero-copy migrations, https://bugzilla.redhat.com/2089434
Requires: qemu-kvm >= 15:6.2.0-11.module+el8.6.0+16360+9e5d914e.4
This is not available in Rocky 8.6, probably not backported from Redhat 8.7?
# dnf update
Last metadata expiration check: 0:02:15 ago on Tue 08 Nov 2022 13:24:14 EET.
Error:
Problem 1: cannot install the best update candidate for package
vdsm-4.50.2.2-1.el8.x86_64
- nothing provides qemu-kvm >= 15:6.2.0-11.module+el8.6.0+16360+9e5d914e.4 needed by
vdsm-4.50.3.4-1.el8.x86_64
G
7:52 a.m.
On 8. 11. 2022, at 12:29, Kapetanakis Giannis
<bilias(a)edu.physics.uoc.gr> wrote:
It seems that vdsm 4.50.3.4-1.el8 has been pushed to centos-ovirt45 which according to
https://github.com/oVirt/vdsm/blob/master/vdsm.spec.in
# Zero-copy migrations, https://bugzilla.redhat.com/2089434
Requires: qemu-kvm >= 15:6.2.0-11.module+el8.6.0+16360+9e5d914e.4
This is not available in Rocky 8.6, probably not backported from Redhat 8.7?
that's still from 8.6, but indeed rocky doesn't seem to contain it. No idea why,
maybe just a delay? You'd have to ask Rocky guys.
Latest qemu-kvm is 6.2.0-11.module+el8.6.0+16538+01ea313d.6 that was released 15 days ago
via https://access.redhat.com/errata/RHBA-2022:7122
<https://access.redhat.com/errata/RHBA-2022:7122>
Thanks,
michal
# dnf update
Last metadata expiration check: 0:02:15 ago on Tue 08 Nov 2022 13:24:14 EET.
Error:
Problem 1: cannot install the best update candidate for package
vdsm-4.50.2.2-1.el8.x86_64
- nothing provides qemu-kvm >= 15:6.2.0-11.module+el8.6.0+16360+9e5d914e.4 needed by
vdsm-4.50.3.4-1.el8.x86_64
G
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/4WHSVV7LKLO...
7:16 p.m.
Hello,
I have the same issue issue with my oVirt v4.5.x system installed by following the oVirt
official installation document at https://www.ovirt.org/download/install_on_rhel.html
The oVirt hosts are Rocky Linux v8.6. When trying to upgrade the oVirt hosts using
oVirt's webadmin GUI or by executing the "yum upgrade" command on the oVirt
hosts, it fails due to a dependency issue.
"Problem 1: cannot install the best update candidate for package
vdsm-4.50.2.2-1.el8.x86_64
- nothing provides qemu-kvm >= 15:6.2.0-11.module+el8.6.0+16360+9e5d914e.4 needed by
vdsm-4.50.3.4-1.el8.x86_64"
The oVirt package vdsm-4.50.3.4-1.el8.x86_64 requires
qemu-kvm-6.2.0-11.module+el8.6.0+16360+9e5d914e.4 or newer, whereas Rocky Linux provides
qemu-kvm-6.2.0-11.module+el8.6.0+1052+ff61d164.6.
For the qemu-kvm package, even though their version numbers are exactly the same
(6.2.0-11.module+el8.6.0), dnf/yum thinks that the "1052" build number for
RockyLinux is older than the 16360 build number required for vdsm-4.50.3.4-1.el8.x86_64.
When I chatted with Rocky Linux developers, they've explained me that this issue's
caused by how the vendor (oVirt) developers pack their software and setting out build
requirements. OVirt packages uses the exact version numbers, including the build numbers,
which increment on each module build. Unfortunately, Red Hat has a higher increment than
all the EL8 derivatives.
Is it possible to solve this issue if you (oVirt developers) are able to re-set the
requirements without using any build numbers (by only saying BuildRequires: qemu-kvm >=
6.2.0-11) to increase the compatibility with the other Enterprise Linux operating
systems?
Thank you
Erkan E
2:44 a.m.
On 10. 11. 2022, at 1:16, Erkan E via Users <users(a)ovirt.org>
wrote:
Hello,
I have the same issue issue with my oVirt v4.5.x system installed by following the oVirt
official installation document at https://www.ovirt.org/download/install_on_rhel.html
The oVirt hosts are Rocky Linux v8.6. When trying to upgrade the oVirt hosts using
oVirt's webadmin GUI or by executing the "yum upgrade" command on the oVirt
hosts, it fails due to a dependency issue.
"Problem 1: cannot install the best update candidate for package
vdsm-4.50.2.2-1.el8.x86_64
- nothing provides qemu-kvm >= 15:6.2.0-11.module+el8.6.0+16360+9e5d914e.4 needed by
vdsm-4.50.3.4-1.el8.x86_64"
The oVirt package vdsm-4.50.3.4-1.el8.x86_64 requires
qemu-kvm-6.2.0-11.module+el8.6.0+16360+9e5d914e.4 or newer, whereas Rocky Linux provides
qemu-kvm-6.2.0-11.module+el8.6.0+1052+ff61d164.6.
For the qemu-kvm package, even though their version numbers are exactly the same
(6.2.0-11.module+el8.6.0), dnf/yum thinks that the "1052" build number for
RockyLinux is older than the 16360 build number required for vdsm-4.50.3.4-1.el8.x86_64.
And rightly, because 1050 is "older" than 16360. Unfortunately for virt module
builds we need to match the whole thing, all of the 8.6.z builds are based on qemu-kvm
6.2.0-11 and we need a zerocopy migration change that has been introduced(backported) only
into later builds
When I chatted with Rocky Linux developers, they've explained me that this
issue's caused by how the vendor (oVirt) developers pack their software and setting
out build requirements. OVirt packages uses the exact version numbers, including the build
numbers, which increment on each module build. Unfortunately, Red Hat has a higher
increment than all the EL8 derivatives.
I have no idea why rocky is building the modules with different series than RHEL. This way
we would indeed have to have a different requirement than rocky, and alma too. We do not
test on rocky, but feel free to post a patch for that.
Note we're moving away from EL8 entirely and in EL9 the module is (fortunately) gone
and the versioning is straightforward again.
Thanks,
michal
Is it possible to solve this issue if you (oVirt developers) are able to re-set the
requirements without using any build numbers (by only saying BuildRequires: qemu-kvm >=
6.2.0-11) to increase the compatibility with the other Enterprise Linux operating
systems?
Thank you
Erkan E
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/RGMDHPXA6DH...
8:15 a.m.
On 10/11/2022 02:16, Erkan E via Users wrote:
snip...
When I chatted with Rocky Linux developers, they've explained me that this
issue's caused by how the vendor (oVirt) developers pack their software and setting
out build requirements. OVirt packages uses the exact version numbers, including the build
numbers, which increment on each module build. Unfortunately, Red Hat has a higher
increment than all the EL8 derivatives.
Is it possible to solve this issue if you (oVirt developers) are able to re-set the
requirements without using any build numbers (by only saying BuildRequires: qemu-kvm >=
6.2.0-11) to increase the compatibility with the other Enterprise Linux operating
systems?
Thank you
Erkan E
Erkan, is the chat with Rocky devs available anywhere public?
Thanks
Giannis
10:43 p.m.
Hi Michal,
Thanks for your reply.
Yes, unfortunately, oVirt's official RPMs do not completely support other Enterprise
Linux (EL) derivatives now, due to this "build number" difference between RHEL
and other EL derivatives, such as Rocky Linux. It's strongly possible that we would
have the same build number compatibility issue with EL9. As I understand, it's also
not possible to say if Rocky Linux's 1050 build number is "older" or
"newer" than RHEL's 16360 build number as RHEL and Rocky have their own
individual building systems.
Hi Giannis,
Yes, after creating a user for you at [1], you can reach my conversation with Louis Abel,
the Rocky Linux Release Engineering Lead, in their "General" chatroom between
11:17AM and 12:23PM on 2022-11-09. Our conversation is publicly available at [2].
[1] https://chat.rockylinux.org/signup_user_complete
[2] https://chat.rockylinux.org/rocky-linux/pl/w54wdpenwjfwxen4myyo9xy7ar
Thanks.
Cheers,
Erkan E
5:10 p.m.
We had this issue with qemu-kvm for Rocky Linux 8.6. The new version 8.7 released a few
days ago.
Rocky Linux 8.7 provides qemu-kvm-6.2.0-20.module+el8.7.0+1084+97b81f61.2. This version is
newer than what oVirt (vdsm 4.50.3.4) requires,
qemu-kvm-6.2.0-11.module+el8.6.0+16360+9e5d914e.4.
768
days inactive
776
days old
6 comments
3 participants
participants (3)
-
Erkan E -
Kapetanakis Giannis -
Michal Skrivanek