3:11 a.m.
Hi all,
I am able to access my VMs from LAN using remote Viewer, however this is
not working from outside LAN, my setup is as follow:
1. Controller in a separate HW machine
2. Host in a server
When checking the console.vv file, I see that it includes the local IP
address of the host + port 5900. Is there a way to force ovirt to generate
a console.vv file with public IP port when the user tries to connect from
Internet and another file with lan IP when the user tries to connect from
LAN.
Any hint on how to set this feature up ?
Best regards
3:48 a.m.
I would recommend setting up an openvpn server or something over opening
that up to the outside.
Just my two cents.
On Tue, May 22, 2018, 8:06 PM Aziz <azizgstest(a)gmail.com> wrote:
Hi all,
I am able to access my VMs from LAN using remote Viewer, however this is
not working from outside LAN, my setup is as follow:
1. Controller in a separate HW machine
2. Host in a server
When checking the console.vv file, I see that it includes the local IP
address of the host + port 5900. Is there a way to force ovirt to generate
a console.vv file with public IP port when the user tries to connect from
Internet and another file with lan IP when the user tries to connect from
LAN.
Any hint on how to set this feature up ?
Best regards
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
6:06 a.m.
You could try at cluster -> console, to overwrite the default with your
public.
Alex
On Wed, May 23, 2018, 03:06 Aziz <azizgstest(a)gmail.com> wrote:
Hi all,
I am able to access my VMs from LAN using remote Viewer, however this is
not working from outside LAN, my setup is as follow:
1. Controller in a separate HW machine
2. Host in a server
When checking the console.vv file, I see that it includes the local IP
address of the host + port 5900. Is there a way to force ovirt to generate
a console.vv file with public IP port when the user tries to connect from
Internet and another file with lan IP when the user tries to connect from
LAN.
Any hint on how to set this feature up ?
Best regards
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
8:20 p.m.
Hi,
Aziz <azizgstest(a)gmail.com> writes:
Hi all,
I am able to access my VMs from LAN using remote Viewer, however this is not
working from outside LAN, my setup is as follow:
1. Controller in a separate HW machine
2. Host in a server
When checking the console.vv file, I see that it includes the local IP address
of the host + port 5900. Is there a way to force ovirt to generate a
console.vv file with public IP port when the user tries to connect from
Internet and another file with lan IP when the user tries to connect from LAN.
Any hint on how to set this feature up ?
I don't think you can set up a different IP based on the connection
source. What I would recommend is setting up a web proxy on your ovirt
host and then tell it to always use the proxy. Specifically, always use
the public IP address.
Of course, this assumes you can reach the public IP from inside your
network. If you can't, then you might have a bigger issue.
Best regards
-derek
--
Derek Atkins, SB '93 MIT EE, SM '95 MIT Media Laboratory
Member, MIT Student Information Processing Board (SIPB)
URL: http://web.mit.edu/warlord/ PP-ASEL-IA N1NWH
warlord(a)MIT.EDU PGP key available
2376
days inactive
2376
days old
3 comments
4 participants
participants (4)
-
Alex K -
Aziz -
Derek Atkins -
Wesley Stewart