10:34 a.m.
Hi. I have configured an ovirt-engine to manage an ovirt node succesfully.
I have created VM and all runs well but im trying to do some escenario
testing and i have found an issue.
If somehow the ovirt node is rebooted(Power failure, crash, manual reboot,
etc) when its comes up it does not start the ovirtmgmt network. Even if in
the ovirt-engine you save network configuration or if you execute persist
on /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It tells you it's
already been added to the configuration.
Is this normal behavior after ovirt node's is rebooted? Am i doing
something wrong?
Best regards.
Francisco.
11:12 a.m.
--=-tTj0U12MfXggFXNd/eLI
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco P=C3=A9rez:
Hi. I have configured an ovirt-engine to manage an ovirt node
succesfully. I have created VM and all runs well but im trying to do
some escenario testing and i have found an issue.
=20
=20
If somehow the ovirt node is rebooted(Power failure, crash, manual
reboot, etc) when its comes up it does not start the ovirtmgmt
network. Even if in the ovirt-engine you save network configuration or
if you execute persist
on /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It tells you it's
already been added to the configuration.
=20
=20
Is this normal behavior after ovirt node's is rebooted? Am i doing
something wrong?
Hey Francisco,
that sounds like a bug.
VDSM Devs, how can we debug why the network is not brought up?
- fabian
--=-tTj0U12MfXggFXNd/eLI
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=Jfk1
-----END PGP SIGNATURE-----
--=-tTj0U12MfXggFXNd/eLI--
11:31 a.m.
On 01/23/2014 06:12 PM, Fabian Deutsch wrote:
Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
> Hi. I have configured an ovirt-engine to manage an ovirt node
> succesfully. I have created VM and all runs well but im trying to do
> some escenario testing and i have found an issue.
>
>
> If somehow the ovirt node is rebooted(Power failure, crash, manual
> reboot, etc) when its comes up it does not start the ovirtmgmt
> network. Even if in the ovirt-engine you save network configuration or
> if you execute persist
> on /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It tells you it's
> already been added to the configuration.
>
>
> Is this normal behavior after ovirt node's is rebooted? Am i doing
> something wrong?
Hey Francisco,
that sounds like a bug.
VDSM Devs, how can we debug why the network is not brought up?
- fabian
is there an open bug tracking this?
1:28 p.m.
----- Original Message -----
From: "Fabian Deutsch" <fabiand(a)redhat.com>
To: "Francisco Pérez" <fperez.x(a)gmail.com>, "VDSM Project
Development" <vdsm-devel(a)lists.fedorahosted.org>
Cc: users(a)ovirt.org
Sent: Thursday, January 23, 2014 5:12:17 PM
Subject: Re: [Users] ovirtmgmt vanishes after reboot
Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
> Hi. I have configured an ovirt-engine to manage an ovirt node
> succesfully. I have created VM and all runs well but im trying to do
> some escenario testing and i have found an issue.
>
>
> If somehow the ovirt node is rebooted(Power failure, crash, manual
> reboot, etc) when its comes up it does not start the ovirtmgmt
> network. Even if in the ovirt-engine you save network configuration or
> if you execute persist
> on /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It tells you it's
> already been added to the configuration.
>
>
> Is this normal behavior after ovirt node's is rebooted? Am i doing
> something wrong?
Hey Francisco,
that sounds like a bug.
VDSM Devs, how can we debug why the network is not brought up?
Well, we should check if after the reboot /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
and /etc/sysconfig/network-scripts/ifcfg-emX (or whatever the name of the
interface ovirtmgmt sits on is) are present. If vdsmd is started and properly
listening and if that is the case. virsh -r net-list has
vdsm-ovirtmgmt
- fabian
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
2:32 p.m.
New subject: [Users] [vdsm] ovirtmgmt vanishes after reboot
On Thu, Jan 23, 2014 at 05:12:17PM +0100, Fabian Deutsch wrote:
Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
> Hi. I have configured an ovirt-engine to manage an ovirt node
> succesfully. I have created VM and all runs well but im trying to do
> some escenario testing and i have found an issue.
>
>
> If somehow the ovirt node is rebooted(Power failure, crash, manual
> reboot, etc) when its comes up it does not start the ovirtmgmt
> network. Even if in the ovirt-engine you save network configuration or
> if you execute persist
> on /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It tells you it's
> already been added to the configuration.
>
>
> Is this normal behavior after ovirt node's is rebooted? Am i doing
> something wrong?
Hey Francisco,
that sounds like a bug.
VDSM Devs, how can we debug why the network is not brought up?
Could you share vdsm.log and supervdsm.log? When you set up ovirtmgmt,
as setupNetworks command should be visible there. Later, on "save", a
call to setSafeNetworkConfig is sent, which is expected to persist your
network configuration.
Is it visible? Is it successful?
What do you see in the logs post boot? Can you tell whether
the vdsm-restore-net-config.init server was run? (its job is to revert
unsaved network config changes on non-ovirt-nodes).
9:27 a.m.
New subject: [Users] [vdsm] ovirtmgmt vanishes after reboot
Im setting up two networks. ovirtmgmt and a LAN. Both of them are gone
after reboot on the node, its starts only with eth0 initial configuration.
Antoni, here are the outputs you requested:
[root@ovirth1 ~]# /etc/init.d/vdsmd status
VDS daemon server is running
[root@ovirth1 ~]# service vdsmd status
VDS daemon server is running
[root@ovirth1 ~]# virsh -r net-list
setlocale: No such file or directory
Name State Autostart Persistent
--------------------------------------------------
;vdsmdummy; active no no
[root@ovirth1 ~]# ls /etc/sysconfig/network-scripts/
ifcfg-eth0 ifdown-eth ifdown-post ifdown-tunnel ifup-eth
ifup-plip ifup-routes init.ipv6-global route-LAN
ifcfg-lo ifdown-ippp ifdown-ppp ifup ifup-ippp
ifup-plusb ifup-sit net.hotplug route-ovirtmgmt
ifdown ifdown-ipv6 ifdown-routes ifup-aliases ifup-ipv6
ifup-post ifup-tunnel network-functions rule-LAN
ifdown-bnep ifdown-isdn ifdown-sit ifup-bnep ifup-isdn ifup-ppp
ifup-wireless network-functions-ipv6 rule-ovirtmgmt
Dan those command are excecuted where? on the manager or the node? Im new
at this and the logs are a little overwhelming so if you help me to
interpret them i'll apreciate them. I have attached the whole log directory
/var/log/vdsm/
Regards
On Thu, Jan 23, 2014 at 4:32 PM, Dan Kenigsberg <danken(a)redhat.com> wrote:
On Thu, Jan 23, 2014 at 05:12:17PM +0100, Fabian Deutsch wrote:
> Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
> > Hi. I have configured an ovirt-engine to manage an ovirt node
> > succesfully. I have created VM and all runs well but im trying to do
> > some escenario testing and i have found an issue.
> >
> >
> > If somehow the ovirt node is rebooted(Power failure, crash, manual
> > reboot, etc) when its comes up it does not start the ovirtmgmt
> > network. Even if in the ovirt-engine you save network configuration or
> > if you execute persist
> > on /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It tells you it's
> > already been added to the configuration.
> >
> >
> > Is this normal behavior after ovirt node's is rebooted? Am i doing
> > something wrong?
>
> Hey Francisco,
>
> that sounds like a bug.
> VDSM Devs, how can we debug why the network is not brought up?
Could you share vdsm.log and supervdsm.log? When you set up ovirtmgmt,
as setupNetworks command should be visible there. Later, on "save", a
call to setSafeNetworkConfig is sent, which is expected to persist your
network configuration.
Is it visible? Is it successful?
What do you see in the logs post boot? Can you tell whether
the vdsm-restore-net-config.init server was run? (its job is to revert
unsaved network config changes on non-ovirt-nodes).
11:23 a.m.
New subject: [Users] ***UNCHECKED*** Re: [vdsm] ovirtmgmt vanishes after reboot
This is a multi-part message in MIME format.
--------------000104060800010905050103
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: quoted-printable
On 28/01/14 11:27, Francisco P=E9rez wrote:
Im setting up two networks. ovirtmgmt and a LAN. Both of them
are=20
gone after reboot on the node, its starts only with eth0 initial=20
configuration.
Antoni, here are the outputs you requested:
[root@ovirth1 ~]# /etc/init.d/vdsmd status
VDS daemon server is running
[root@ovirth1 ~]# service vdsmd status
VDS daemon server is running
[root@ovirth1 ~]# virsh -r net-list
setlocale: No such file or directory
Name State Autostart Persistent
--------------------------------------------------
;vdsmdummy; active no no
[root@ovirth1 ~]# ls /etc/sysconfig/network-scripts/
ifcfg-eth0 ifdown-eth ifdown-post ifdown-tunnel ifup-eth =20
ifup-plip ifup-routes init.ipv6-global route-LAN
ifcfg-lo ifdown-ippp ifdown-ppp ifup ifup-ippp ifup-plusb=20
ifup-sit net.hotplug route-ovirtmgmt
ifdown ifdown-ipv6 ifdown-routes ifup-aliases ifup-ipv6=20
ifup-post ifup-tunnel network-functions rule-LAN
ifdown-bnep ifdown-isdn ifdown-sit ifup-bnep ifup-isdn=20
ifup-ppp ifup-wireless network-functions-ipv6 rule-ovirtmgmt
Dan those command are excecuted where? on the manager or the node? Im=20
new at this and the logs are a little overwhelming so if you help me=20
to interpret them i'll apreciate them. I have attached the whole log=20
directory /var/log/vdsm/
Regards
On Thu, Jan 23, 2014 at 4:32 PM, Dan Kenigsberg <danken(a)redhat.com=20
<mailto:danken@redhat.com>> wrote:
On Thu, Jan 23, 2014 at 05:12:17PM +0100, Fabian Deutsch wrote:
> Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco P=E9=
rez:
> > Hi. I have configured an ovirt-engine to manage an
ovirt node
> > succesfully. I have created VM and all runs well but im trying
to do
> > some escenario testing and i have found an issue.
> >
> >
> > If somehow the ovirt node is rebooted(Power failure, crash,
manual
> > reboot, etc) when its comes up it does not start the ovirtmgmt
> > network. Even if in the ovirt-engine you save network
configuration or
> > if you execute persist
> > on /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It tells
you it's
> > already been added to the configuration.
> >
> >
> > Is this normal behavior after ovirt node's is rebooted? Am i
doing
> > something wrong?
>
> Hey Francisco,
>
> that sounds like a bug.
> VDSM Devs, how can we debug why the network is not brought up?
Could you share vdsm.log and supervdsm.log? When you set up ovirtmg=
mt,
as setupNetworks command should be visible there. Later, on
"save",=
a
call to setSafeNetworkConfig is sent, which is expected to
persist
your
network configuration.
Is it visible? Is it successful?
What do you see in the logs post boot? Can you tell whether
the vdsm-restore-net-config.init server was run? (its job is to rev=
ert
unsaved network config changes on non-ovirt-nodes).
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
I had the same issue with
3.0.1-1.0.2.el6, I saw other posts about this=20
problem (=20
http://lists.ovirt.org/pipermail/users/2013-September/016705.html ) and=20
then I decided to discard ovirt-node and use a full blown distro (Centos=20
6.5)
Regards
Federico
--------------000104060800010905050103
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">On 28/01/14 11:27, Francisco
Pérez
wrote:<br>
</div>
<blockquote
cite="mid:CACmKH4CaDFDq2P7H5sFTWvj1jfCZuLs2V07Yrg9+HzMGv5OkAQ@mail.gmail.com"
type="cite">
<div dir="ltr">
<div> Im setting up two networks. ovirtmgmt and a LAN. Both of
them are gone after reboot on the node, its starts only with
eth0 initial configuration.</div>
<div><br>
</div>
<div>Antoni, here are the outputs you requested:</div>
<div><br>
</div>
<div>[root@ovirth1 ~]# /etc/init.d/vdsmd status</div>
<div>VDS daemon server is running</div>
<div>[root@ovirth1 ~]# service vdsmd status</div>
<div>VDS daemon server is running</div>
<div>[root@ovirth1 ~]# virsh -r net-list</div>
<div>setlocale: No such file or directory</div>
<div>Name
State Autostart
Persistent</div>
<div>--------------------------------------------------</div>
<div>;vdsmdummy;
active no
no</div>
<div><br>
</div>
<div>[root@ovirth1 ~]# ls /etc/sysconfig/network-scripts/</div>
<div>ifcfg-eth0 ifdown-eth ifdown-post
ifdown-tunnel
ifup-eth ifup-plip ifup-routes
init.ipv6-global
route-LAN</div>
<div>
ifcfg-lo ifdown-ippp ifdown-ppp
ifup
ifup-ippp ifup-plusb ifup-sit
net.hotplug
route-ovirtmgmt</div>
<div>ifdown ifdown-ipv6
ifdown-routes ifup-aliases
ifup-ipv6 ifup-post ifup-tunnel
network-functions
rule-LAN</div>
<div>ifdown-bnep ifdown-isdn ifdown-sit
ifup-bnep
ifup-isdn ifup-ppp ifup-wireless
network-functions-ipv6
rule-ovirtmgmt</div>
<div><br>
</div>
<div>Dan those command are excecuted where? on the manager or
the node? Im new at this and the logs are a little
overwhelming so if you help me to interpret them i'll
apreciate them. I have attached the whole log directory
/var/log/vdsm/</div>
<div><br>
</div>
<div>Regards</div>
<div><br>
</div>
</div>
<div class="gmail_extra"><br>
<br>
<div class="gmail_quote">On Thu, Jan 23, 2014 at 4:32 PM, Dan
Kenigsberg <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:danken@redhat.com"
target="_blank">danken(a)redhat.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="HOEnZb">
<div class="h5">On Thu, Jan 23, 2014 at 05:12:17PM +0100,
Fabian Deutsch wrote:<br>
> Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb
Francisco Pérez:<br>
> > Hi. I have configured an ovirt-engine to
manage an ovirt node<br>
> > succesfully. I have created VM and all runs
well but im trying to do<br>
> > some escenario testing and i have found an
issue.<br>
> ><br>
> ><br>
> > If somehow the ovirt node is rebooted(Power
failure, crash, manual<br>
> > reboot, etc) when its comes up it does not
start the ovirtmgmt<br>
> > network. Even if in the ovirt-engine you save
network configuration or<br>
> > if you execute persist<br>
> > on
/etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It tells
you it's<br>
> > already been added to the configuration.<br>
> ><br>
> ><br>
> > Is this normal behavior after ovirt node's
is
rebooted? Am i doing<br>
> > something wrong?<br>
><br>
> Hey Francisco,<br>
><br>
> that sounds like a bug.<br>
> VDSM Devs, how can we debug why the network is not
brought up?<br>
<br>
</div>
</div>
Could you share vdsm.log and supervdsm.log? When you set up
ovirtmgmt,<br>
as setupNetworks command should be visible there. Later, on
"save", a<br>
call to setSafeNetworkConfig is sent, which is expected to
persist your<br>
network configuration.<br>
<br>
Is it visible? Is it successful?<br>
<br>
What do you see in the logs post boot? Can you tell whether<br>
the vdsm-restore-net-config.init server was run? (its job is
to revert<br>
unsaved network config changes on non-ovirt-nodes).<br>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
I had the same issue with 3.0.1-1.0.2.el6, I saw other posts about
this problem (
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/pipermail/users/2013-September/016705.h...
)
and then I decided to discard ovirt-node and use a full blown distro
(Centos 6.5)<br>
<br>
<br>
Regards<br>
<br>
Federico<br>
</body>
</html>
--------------000104060800010905050103--
11:34 a.m.
New subject: [Users] ***UNCHECKED*** Re: [vdsm] ovirtmgmt vanishes after reboot
----- Original Message -----
From: "Federico Alberto Sayd" <fsayd(a)uncu.edu.ar>
To: users(a)ovirt.org
Sent: Tuesday, January 28, 2014 5:23:13 PM
Subject: Re: [Users] ***UNCHECKED*** Re: [vdsm] ovirtmgmt vanishes after reboot
On 28/01/14 11:27, Francisco Pérez wrote:
Im setting up two networks. ovirtmgmt and a LAN. Both of them are gone after
reboot on the node, its starts only with eth0 initial configuration.
Antoni, here are the outputs you requested:
[root@ovirth1 ~]# /etc/init.d/vdsmd status
VDS daemon server is running
[root@ovirth1 ~]# service vdsmd status
VDS daemon server is running
[root@ovirth1 ~]# virsh -r net-list
setlocale: No such file or directory
Name State Autostart Persistent
--------------------------------------------------
;vdsmdummy; active no no
[root@ovirth1 ~]# ls /etc/sysconfig/network-scripts/
ifcfg-eth0 ifdown-eth ifdown-post ifdown-tunnel ifup-eth ifup-plip
ifup-routes init.ipv6-global route-LAN
ifcfg-lo ifdown-ippp ifdown-ppp ifup ifup-ippp ifup-plusb ifup-sit
net.hotplug route-ovirtmgmt
ifdown ifdown-ipv6 ifdown-routes ifup-aliases ifup-ipv6 ifup-post ifup-tunnel
network-functions rule-LAN
ifdown-bnep ifdown-isdn ifdown-sit ifup-bnep ifup-isdn ifup-ppp ifup-wireless
network-functions-ipv6 rule-ovirtmgmt
Just to maek sure, /etc/vdsm/vdsm.conf does not modify net_persistence nor
net_configurator, does it?
If it does not, and you ticked "Save" on the setupNetworks dialogs, there is
some issue with the net persistence flow on the ovirt node and a bug should be
opened for it.
Dan those command are excecuted where? on the manager or the node? Im new at
this and the logs are a little overwhelming so if you help me to interpret
them i'll apreciate them. I have attached the whole log directory
/var/log/vdsm/
Regards
On Thu, Jan 23, 2014 at 4:32 PM, Dan Kenigsberg < danken(a)redhat.com > wrote:
On Thu, Jan 23, 2014 at 05:12:17PM +0100, Fabian Deutsch wrote:
> Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
> > Hi. I have configured an ovirt-engine to manage an ovirt node
> > succesfully. I have created VM and all runs well but im trying to do
> > some escenario testing and i have found an issue.
> >
> >
> > If somehow the ovirt node is rebooted(Power failure, crash, manual
> > reboot, etc) when its comes up it does not start the ovirtmgmt
> > network. Even if in the ovirt-engine you save network configuration or
> > if you execute persist
> > on /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It tells you it's
> > already been added to the configuration.
> >
> >
> > Is this normal behavior after ovirt node's is rebooted? Am i doing
> > something wrong?
>
> Hey Francisco,
>
> that sounds like a bug.
> VDSM Devs, how can we debug why the network is not brought up?
Could you share vdsm.log and supervdsm.log? When you set up ovirtmgmt,
as setupNetworks command should be visible there. Later, on "save", a
call to setSafeNetworkConfig is sent, which is expected to persist your
network configuration.
Is it visible? Is it successful?
What do you see in the logs post boot? Can you tell whether
the vdsm-restore-net-config.init server was run? (its job is to revert
unsaved network config changes on non-ovirt-nodes).
_______________________________________________
Users mailing list Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
I had the same issue with 3.0.1-1.0.2.el6, I saw other posts about this
problem ( http://lists.ovirt.org/pipermail/users/2013-September/016705.html
) and then I decided to discard ovirt-node and use a full blown distro
(Centos 6.5)
Regards
Federico
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:04 p.m.
New subject: [Users] ***UNCHECKED*** Re: [vdsm] ovirtmgmt vanishes after reboot
On the node the content of that file is only this:
[addresses]
management_port = 54321
[vars]
ssl = true
so i don't see any options wich will modify net config. Yes, on ovirt
manager i have ticked save network configuration.
For the record im using oVirt Node Hypervisor release 3.0.1 (1.0.2.el6)
Regards
On Tue, Jan 28, 2014 at 1:34 PM, Antoni Segura Puimedon <asegurap(a)redhat.com
wrote:
>
>
> ----- Original Message -----
> > From: "Federico Alberto Sayd" <fsayd(a)uncu.edu.ar>
> > To: users(a)ovirt.org
> > Sent: Tuesday, January 28, 2014 5:23:13 PM
> > Subject: Re: [Users] ***UNCHECKED*** Re: [vdsm] ovirtmgmt vanishes after
> reboot
> >
> > On 28/01/14 11:27, Francisco Pérez wrote:
> >
> >
> >
> > Im setting up two networks. ovirtmgmt and a LAN. Both of them are gone
> after
> > reboot on the node, its starts only with eth0 initial configuration.
> >
> > Antoni, here are the outputs you requested:
> >
> > [root@ovirth1 ~]# /etc/init.d/vdsmd status
> > VDS daemon server is running
> > [root@ovirth1 ~]# service vdsmd status
> > VDS daemon server is running
> > [root@ovirth1 ~]# virsh -r net-list
> > setlocale: No such file or directory
> > Name State Autostart Persistent
> > --------------------------------------------------
> > ;vdsmdummy; active no no
> >
> > [root@ovirth1 ~]# ls /etc/sysconfig/network-scripts/
> > ifcfg-eth0 ifdown-eth ifdown-post ifdown-tunnel ifup-eth ifup-plip
> > ifup-routes init.ipv6-global route-LAN
> > ifcfg-lo ifdown-ippp ifdown-ppp ifup ifup-ippp ifup-plusb ifup-sit
> > net.hotplug route-ovirtmgmt
> > ifdown ifdown-ipv6 ifdown-routes ifup-aliases ifup-ipv6 ifup-post
> ifup-tunnel
> > network-functions rule-LAN
> > ifdown-bnep ifdown-isdn ifdown-sit ifup-bnep ifup-isdn ifup-ppp
> ifup-wireless
> > network-functions-ipv6 rule-ovirtmgmt
>
> Just to maek sure, /etc/vdsm/vdsm.conf does not modify net_persistence nor
> net_configurator, does it?
>
> If it does not, and you ticked "Save" on the setupNetworks dialogs, there
> is
> some issue with the net persistence flow on the ovirt node and a bug
> should be
> opened for it.
>
> >
> > Dan those command are excecuted where? on the manager or the node? Im
> new at
> > this and the logs are a little overwhelming so if you help me to
> interpret
> > them i'll apreciate them. I have attached the whole log directory
> > /var/log/vdsm/
> >
> > Regards
> >
> >
> >
> > On Thu, Jan 23, 2014 at 4:32 PM, Dan Kenigsberg < danken(a)redhat.com >
wrote:
> >
> >
> >
> > On Thu, Jan 23, 2014 at 05:12:17PM +0100, Fabian Deutsch wrote:
> > > Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
> > > > Hi. I have configured an ovirt-engine to manage an ovirt node
> > > > succesfully. I have created VM and all runs well but im trying to do
> > > > some escenario testing and i have found an issue.
> > > >
> > > >
> > > > If somehow the ovirt node is rebooted(Power failure, crash, manual
> > > > reboot, etc) when its comes up it does not start the ovirtmgmt
> > > > network. Even if in the ovirt-engine you save network configuration
> or
> > > > if you execute persist
> > > > on /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It tells you
it's
> > > > already been added to the configuration.
> > > >
> > > >
> > > > Is this normal behavior after ovirt node's is rebooted? Am i
doing
> > > > something wrong?
> > >
> > > Hey Francisco,
> > >
> > > that sounds like a bug.
> > > VDSM Devs, how can we debug why the network is not brought up?
> >
> > Could you share vdsm.log and supervdsm.log? When you set up ovirtmgmt,
> > as setupNetworks command should be visible there. Later, on "save", a
> > call to setSafeNetworkConfig is sent, which is expected to persist your
> > network configuration.
> >
> > Is it visible? Is it successful?
> >
> > What do you see in the logs post boot? Can you tell whether
> > the vdsm-restore-net-config.init server was run? (its job is to revert
> > unsaved network config changes on non-ovirt-nodes).
> >
> >
> >
> > _______________________________________________
> > Users mailing list Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> > I had the same issue with 3.0.1-1.0.2.el6, I saw other posts about this
> > problem (
> http://lists.ovirt.org/pipermail/users/2013-September/016705.html
> > ) and then I decided to discard ovirt-node and use a full blown distro
> > (Centos 6.5)
> >
> >
> > Regards
> >
> > Federico
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
4:49 a.m.
New subject: [Users] ***UNCHECKED*** Re: [vdsm] ovirtmgmt vanishes after reboot
--=-hPtvAESeEvNOBzWJws8z
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Dienstag, den 28.01.2014, 14:04 -0300 schrieb Francisco P=C3=A9rez:
On the node the content of that file is only this:
=20
=20
[addresses]
management_port =3D 54321
=20
=20
[vars]
ssl =3D true
=20
=20
so i don't see any options wich will modify net config. Yes, on ovirt
manager i have ticked save network configuration.=20
Hey,
as Anotni noted - please open a bug for this. It seems that some
configuration file is not persisted.
For the record im using oVirt Node Hypervisor release 3.0.1
(1.0.2.el6)
That Node is very old, better would be the Node used on the testDay, but
I've take it down by now. We'll have an updated Node next week which you
can try.
- fabian
=20
Regards
=20
=20
On Tue, Jan 28, 2014 at 1:34 PM, Antoni Segura Puimedon
<asegurap(a)redhat.com> wrote:
=20
=20
----- Original Message -----
> From: "Federico Alberto Sayd" <fsayd(a)uncu.edu.ar>
> To: users(a)ovirt.org
> Sent: Tuesday, January 28, 2014 5:23:13 PM
> Subject: Re: [Users] ***UNCHECKED*** Re: [vdsm] ovirtmgmt
vanishes after reboot
>
> On 28/01/14 11:27, Francisco P=C3=A9rez wrote:
>
>
>
> Im setting up two networks. ovirtmgmt and a LAN. Both of
them are gone after
> reboot on the node, its starts only with eth0 initial
configuration.
>
> Antoni, here are the outputs you requested:
>
> [root@ovirth1 ~]# /etc/init.d/vdsmd status
> VDS daemon server is running
> [root@ovirth1 ~]# service vdsmd status
> VDS daemon server is running
> [root@ovirth1 ~]# virsh -r net-list
> setlocale: No such file or directory
> Name State Autostart Persistent
> --------------------------------------------------
> ;vdsmdummy; active no no
>
> [root@ovirth1 ~]# ls /etc/sysconfig/network-scripts/
> ifcfg-eth0 ifdown-eth ifdown-post ifdown-tunnel ifup-eth
ifup-plip
> ifup-routes init.ipv6-global route-LAN
> ifcfg-lo ifdown-ippp ifdown-ppp ifup ifup-ippp ifup-plusb
ifup-sit
> net.hotplug route-ovirtmgmt
> ifdown ifdown-ipv6 ifdown-routes ifup-aliases ifup-ipv6
ifup-post ifup-tunnel
> network-functions rule-LAN
> ifdown-bnep ifdown-isdn ifdown-sit ifup-bnep ifup-isdn
ifup-ppp ifup-wireless
> network-functions-ipv6 rule-ovirtmgmt
=20
=20
Just to maek sure, /etc/vdsm/vdsm.conf does not modify
net_persistence nor
net_configurator, does it?
=20
If it does not, and you ticked "Save" on the setupNetworks
dialogs, there is
some issue with the net persistence flow on the ovirt node and
a bug should be
opened for it.
=20
>
> Dan those command are excecuted where? on the manager or the
node? Im new at
> this and the logs are a little overwhelming so if you help
me to interpret
> them i'll apreciate them. I have attached the whole log
directory
> /var/log/vdsm/
>
> Regards
>
>
>
> On Thu, Jan 23, 2014 at 4:32 PM, Dan Kenigsberg <
danken(a)redhat.com > wrote:
>
>
>
> On Thu, Jan 23, 2014 at 05:12:17PM +0100, Fabian Deutsch
wrote:
> > Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb
Francisco P=C3=A9rez:
> > > Hi. I have configured an ovirt-engine to manage an ovirt
node
> > > succesfully. I have created VM and all runs well but im
trying to do
> > > some escenario testing and i have found an issue.
> > >
> > >
> > > If somehow the ovirt node is rebooted(Power failure,
crash, manual
> > > reboot, etc) when its comes up it does not start the
ovirtmgmt
> > > network. Even if in the ovirt-engine you save network
configuration or
> > > if you execute persist
> > > on /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. It
tells you it's
> > > already been added to the configuration.
> > >
> > >
> > > Is this normal behavior after ovirt node's is rebooted?
Am i doing
> > > something wrong?
> >
> > Hey Francisco,
> >
> > that sounds like a bug.
> > VDSM Devs, how can we debug why the network is not brought
up?
>
> Could you share vdsm.log and supervdsm.log? When you set up
ovirtmgmt,
> as setupNetworks command should be visible there. Later, on
"save", a
> call to setSafeNetworkConfig is sent, which is expected to
persist your
> network configuration.
>
> Is it visible? Is it successful?
>
> What do you see in the logs post boot? Can you tell whether
> the vdsm-restore-net-config.init server was run? (its job is
to revert
> unsaved network config changes on non-ovirt-nodes).
>
>
>
> _______________________________________________
> Users mailing list Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> I had the same issue with 3.0.1-1.0.2.el6, I saw other posts
about this
> problem
( http://lists.ovirt.org/pipermail/users/2013-September/016705.ht=
ml
> ) and then I decided to discard ovirt-node and use a
full
blown distro
> (Centos 6.5)
>
>
> Regards
>
> Federico
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
=20
=20
=20
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--=-hPtvAESeEvNOBzWJws8z
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=rCfB
-----END PGP SIGNATURE-----
--=-hPtvAESeEvNOBzWJws8z--
4:47 p.m.
New subject: [Users] [vdsm] ovirtmgmt vanishes after reboot
On Tue, Jan 28, 2014 at 11:27:21AM -0300, Francisco Pérez wrote:
Im setting up two networks. ovirtmgmt and a LAN. Both of them are
gone
after reboot on the node, its starts only with eth0 initial configuration.
Antoni, here are the outputs you requested:
[root@ovirth1 ~]# /etc/init.d/vdsmd status
VDS daemon server is running
[root@ovirth1 ~]# service vdsmd status
VDS daemon server is running
[root@ovirth1 ~]# virsh -r net-list
setlocale: No such file or directory
Name State Autostart Persistent
--------------------------------------------------
;vdsmdummy; active no no
[root@ovirth1 ~]# ls /etc/sysconfig/network-scripts/
ifcfg-eth0 ifdown-eth ifdown-post ifdown-tunnel ifup-eth
ifup-plip ifup-routes init.ipv6-global route-LAN
ifcfg-lo ifdown-ippp ifdown-ppp ifup ifup-ippp
ifup-plusb ifup-sit net.hotplug route-ovirtmgmt
ifdown ifdown-ipv6 ifdown-routes ifup-aliases ifup-ipv6
ifup-post ifup-tunnel network-functions rule-LAN
ifdown-bnep ifdown-isdn ifdown-sit ifup-bnep ifup-isdn ifup-ppp
ifup-wireless network-functions-ipv6 rule-ovirtmgmt
Dan those command are excecuted where? on the manager or the node? Im new
at this and the logs are a little overwhelming so if you help me to
interpret them i'll apreciate them. I have attached the whole log directory
/var/log/vdsm/
>
> Could you share vdsm.log and supervdsm.log? When you set up ovirtmgmt,
> as setupNetworks command should be visible there. Later, on "save", a
> call to setSafeNetworkConfig is sent, which is expected to persist your
> network configuration.
>
> Is it visible? Is it successful?
Your supervdsmd has
MainProcess|Thread-26::DEBUG::2014-01-27
15:51:48,866::configNetwork::561::Storage.Misc.excCmd::(setSafeNetworkConfig)
'/usr/share/vdsm/vdsm-store-net-config' (cwd None)
which reports success, too.
>
> What do you see in the logs post boot? Can you tell whether
> the vdsm-restore-net-config.init server was run? (its job is to revert
> unsaved network config changes on non-ovirt-nodes).
Maybe you can debug the issue:
Setup up a network but do not save it yet.
Log into your ovirt-node.
You should see /etc/sysconfig/network-scripts/ifcfg-<YOURNET>
and /var/lib/vdsm/netconfback/ifcfg-<YOURNET>, the
latter meaning that it's not yet persisted.
Now run locally
vdsClient -s 0 setSafeNetworkConfig
You should see /config/etc/sysconfig/network-scripts/ifcfg-<YOURNET>
created, and /var/lib/vdsm/netconfback/ifcfg-<YOURNET> gone.
Now please run
/usr/share/vdsm/vdsm-restore-net-config
which should do absolutely nothing.
If the process above breaks, it's a Vdsm bug. If not, it most probably
something in ovirt-node.
5:42 p.m.
New subject: [Users] [vdsm] ovirtmgmt vanishes after reboot
----- Original Message -----
From: "Dan Kenigsberg" <danken(a)redhat.com>
To: "Francisco Pérez" <fperez.x(a)gmail.com>
Cc: "Fabian Deutsch" <fabiand(a)redhat.com>, amuller(a)redhat.com,
asegurap(a)redhat.com, "VDSM Project Development"
<vdsm-devel(a)lists.fedorahosted.org>, users(a)ovirt.org
Sent: Tuesday, January 28, 2014 10:47:17 PM
Subject: Re: [vdsm] [Users] ovirtmgmt vanishes after reboot
On Tue, Jan 28, 2014 at 11:27:21AM -0300, Francisco Pérez wrote:
> Im setting up two networks. ovirtmgmt and a LAN. Both of them are gone
> after reboot on the node, its starts only with eth0 initial configuration.
>
> Antoni, here are the outputs you requested:
>
> [root@ovirth1 ~]# /etc/init.d/vdsmd status
> VDS daemon server is running
> [root@ovirth1 ~]# service vdsmd status
> VDS daemon server is running
> [root@ovirth1 ~]# virsh -r net-list
> setlocale: No such file or directory
> Name State Autostart Persistent
> --------------------------------------------------
> ;vdsmdummy; active no no
>
> [root@ovirth1 ~]# ls /etc/sysconfig/network-scripts/
> ifcfg-eth0 ifdown-eth ifdown-post ifdown-tunnel ifup-eth
> ifup-plip ifup-routes init.ipv6-global route-LAN
> ifcfg-lo ifdown-ippp ifdown-ppp ifup ifup-ippp
> ifup-plusb ifup-sit net.hotplug route-ovirtmgmt
> ifdown ifdown-ipv6 ifdown-routes ifup-aliases ifup-ipv6
> ifup-post ifup-tunnel network-functions rule-LAN
> ifdown-bnep ifdown-isdn ifdown-sit ifup-bnep ifup-isdn ifup-ppp
> ifup-wireless network-functions-ipv6 rule-ovirtmgmt
>
> Dan those command are excecuted where? on the manager or the node? Im new
> at this and the logs are a little overwhelming so if you help me to
> interpret them i'll apreciate them. I have attached the whole log directory
> /var/log/vdsm/
> >
> > Could you share vdsm.log and supervdsm.log? When you set up ovirtmgmt,
> > as setupNetworks command should be visible there. Later, on "save",
a
> > call to setSafeNetworkConfig is sent, which is expected to persist your
> > network configuration.
> >
> > Is it visible? Is it successful?
Your supervdsmd has
MainProcess|Thread-26::DEBUG::2014-01-27
15:51:48,866::configNetwork::561::Storage.Misc.excCmd::(setSafeNetworkConfig)
'/usr/share/vdsm/vdsm-store-net-config' (cwd None)
which reports success, too.
> >
> > What do you see in the logs post boot? Can you tell whether
> > the vdsm-restore-net-config.init server was run? (its job is to revert
> > unsaved network config changes on non-ovirt-nodes).
Maybe you can debug the issue:
Setup up a network but do not save it yet.
Log into your ovirt-node.
You should see /etc/sysconfig/network-scripts/ifcfg-<YOURNET>
and /var/lib/vdsm/netconfback/ifcfg-<YOURNET>, the
latter meaning that it's not yet persisted.
Now run locally
vdsClient -s 0 setSafeNetworkConfig
You should see /config/etc/sysconfig/network-scripts/ifcfg-<YOURNET>
created,
and /var/lib/vdsm/netconfback/ifcfg-<YOURNET> gone.
/var/lib/vdsm/netconfback/ifcfg-<YOURNET> is not removed on oVirt Node
as /var/lib/vdsm/netconfback is sitting on a tmpfs so there was no
need to call it for the reboot case.
We made some more tests with Francisco on #ovirt today and we saw that
for some unknown reason, when rebooting the machine the ifcfg-<YOURNET>
files disappear while the rule-<YOURNET> and route-<YOURNET> stay. That
happens even when the both ifcfg, rule and route have the correct entry
in /config/files and are bound to /config/etc/sysconfig/
After reboot it returns to eth0 having the connectivity as it was defined
with the TUI.
For libvirt networks a bit of the same as for ifcfg files. Before reboot
/etc/libvirt/qemu/networks is present in /config/files and findmnt reports
that /etc/libvirt/qemu/networks is a bound mount of /config/etc/libvirt/qemu/networks.
After reboot it is not the case anymore.
@Fabian: Do you think there is something on the reboot that restores the
network conf to the TUI settings?
Now please run
/usr/share/vdsm/vdsm-restore-net-config
which should do absolutely nothing.
If the process above breaks, it's a Vdsm bug. If not, it most probably
something in ovirt-node.
4:59 a.m.
New subject: [Users] [vdsm] ovirtmgmt vanishes after reboot
--=-LzXACW09kFKF/aNeq+H6
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Dienstag, den 28.01.2014, 17:42 -0500 schrieb Antoni Segura Puimedon:
=20
We made some more tests with Francisco on #ovirt today and we saw that
for some unknown reason, when rebooting the machine the
ifcfg-<YOURNET>
files disappear while the rule-<YOURNET> and route-<YOURNET> stay.
That
happens even when the both ifcfg, rule and route have the correct
entry
in /config/files and are bound to /config/etc/sysconfig/
=20
After reboot it returns to eth0 having the connectivity as it was
defined
with the TUI.
=20
For libvirt networks a bit of the same as for ifcfg files. Before
reboot
/etc/libvirt/qemu/networks is present in /config/files and findmnt
reports
that /etc/libvirt/qemu/networks is a bound mount
of /config/etc/libvirt/qemu/networks.
After reboot it is not the case anymore.
=20
@Fabian: Do you think there is something on the reboot that restores
the
network conf to the TUI settings?
Hey Antoni,
I vaguely remember that we had a problem with Node removing some ifcfg-*
files. But this should have been solved in the TestDay iso.
What ISO did you use to reproduce this problem?
- fabian
--=-LzXACW09kFKF/aNeq+H6
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=HdIR
-----END PGP SIGNATURE-----
--=-LzXACW09kFKF/aNeq+H6--
5:02 a.m.
New subject: [Users] [vdsm] ovirtmgmt vanishes after reboot
----- Original Message -----
From: "Fabian Deutsch" <fabiand(a)redhat.com>
To: "Antoni Segura Puimedon" <asegurap(a)redhat.com>
Cc: "Dan Kenigsberg" <danken(a)redhat.com>, "Francisco Pérez"
<fperez.x(a)gmail.com>, amuller(a)redhat.com, "VDSM Project
Development" <vdsm-devel(a)lists.fedorahosted.org>, users(a)ovirt.org
Sent: Wednesday, January 29, 2014 10:59:43 AM
Subject: Re: [vdsm] [Users] ovirtmgmt vanishes after reboot
Am Dienstag, den 28.01.2014, 17:42 -0500 schrieb Antoni Segura Puimedon:
>
> We made some more tests with Francisco on #ovirt today and we saw that
> for some unknown reason, when rebooting the machine the
> ifcfg-<YOURNET>
> files disappear while the rule-<YOURNET> and route-<YOURNET> stay.
> That
> happens even when the both ifcfg, rule and route have the correct
> entry
> in /config/files and are bound to /config/etc/sysconfig/
>
> After reboot it returns to eth0 having the connectivity as it was
> defined
> with the TUI.
>
> For libvirt networks a bit of the same as for ifcfg files. Before
> reboot
> /etc/libvirt/qemu/networks is present in /config/files and findmnt
> reports
> that /etc/libvirt/qemu/networks is a bound mount
> of /config/etc/libvirt/qemu/networks.
> After reboot it is not the case anymore.
>
> @Fabian: Do you think there is something on the reboot that restores
> the
> network conf to the TUI settings?
Hey Antoni,
I vaguely remember that we had a problem with Node removing some ifcfg-*
files. But this should have been solved in the TestDay iso.
What ISO did you use to reproduce this problem?
We reproduced on Francisco's setup, I think it was oVirt node 3.0.1
- fabian
5:07 a.m.
New subject: [Users] [vdsm] ovirtmgmt vanishes after reboot
--=-vW83WUiBXUlu8xW3ZHJo
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Mittwoch, den 29.01.2014, 05:02 -0500 schrieb Antoni Segura Puimedon:
----- Original Message -----
> From: "Fabian Deutsch" <fabiand(a)redhat.com>
> To: "Antoni Segura Puimedon" <asegurap(a)redhat.com>
> Cc: "Dan Kenigsberg" <danken(a)redhat.com>, "Francisco
P=C3=A9rez"
<fperez.x(a)gmail.com>, amuller(a)redhat.com, "VDSM Project
> Development" <vdsm-devel(a)lists.fedorahosted.org>, users(a)ovirt.org
> Sent: Wednesday, January 29, 2014 10:59:43 AM
> Subject: Re: [vdsm] [Users] ovirtmgmt vanishes after reboot
>=20
> Am Dienstag, den 28.01.2014, 17:42 -0500 schrieb Antoni Segura
Puimedon:
> >=20
> > We made some more tests with Francisco on #ovirt today and we saw
that
> > for some unknown reason, when rebooting the machine the
> > ifcfg-<YOURNET>
> > files disappear while the rule-<YOURNET> and route-<YOURNET> stay.
> > That
> > happens even when the both ifcfg, rule and route have the correct
> > entry
> > in /config/files and are bound to /config/etc/sysconfig/
> >=20
> > After reboot it returns to eth0 having the connectivity as it was
> > defined
> > with the TUI.
> >=20
> > For libvirt networks a bit of the same as for ifcfg files. Before
> > reboot
> > /etc/libvirt/qemu/networks is present in /config/files and findmnt
> > reports
> > that /etc/libvirt/qemu/networks is a bound mount
> > of /config/etc/libvirt/qemu/networks.
> > After reboot it is not the case anymore.
> >=20
> > @Fabian: Do you think there is something on the reboot that
restores
> > the
> > network conf to the TUI settings?
>=20
> Hey Antoni,
>=20
> I vaguely remember that we had a problem with Node removing some
ifcfg-*
> files. But this should have been solved in the TestDay iso.
>=20
> What ISO did you use to reproduce this problem?
=20
We reproduced on Francisco's setup, I think it was oVirt node 3.0.1
Right.
I believe the bug you are seeing is:
http://gerrit.ovirt.org/#/c/20068/
This has been merged into out stable branch, but the release of a new
oVirt Node ISO for 3.3 is pending because of the vdsm-python-cpopen
dependency problem.
We plan to do a build early next week.
- fabian
--=-vW83WUiBXUlu8xW3ZHJo
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=qgJP
-----END PGP SIGNATURE-----
--=-vW83WUiBXUlu8xW3ZHJo--
7:49 a.m.
New subject: [Users] [vdsm] ovirtmgmt vanishes after reboot
OK. thanks all of you for your help. I'll wait until the new release.
On Wed, Jan 29, 2014 at 7:07 AM, Fabian Deutsch <fabiand(a)redhat.com> wrote:
Am Mittwoch, den 29.01.2014, 05:02 -0500 schrieb Antoni Segura
Puimedon:
> ----- Original Message -----
> > From: "Fabian Deutsch" <fabiand(a)redhat.com>
> > To: "Antoni Segura Puimedon" <asegurap(a)redhat.com>
> > Cc: "Dan Kenigsberg" <danken(a)redhat.com>, "Francisco
Pérez"
> <fperez.x(a)gmail.com>, amuller(a)redhat.com, "VDSM Project
> > Development" <vdsm-devel(a)lists.fedorahosted.org>, users(a)ovirt.org
> > Sent: Wednesday, January 29, 2014 10:59:43 AM
> > Subject: Re: [vdsm] [Users] ovirtmgmt vanishes after reboot
> >
> > Am Dienstag, den 28.01.2014, 17:42 -0500 schrieb Antoni Segura
> Puimedon:
> > >
> > > We made some more tests with Francisco on #ovirt today and we saw
> that
> > > for some unknown reason, when rebooting the machine the
> > > ifcfg-<YOURNET>
> > > files disappear while the rule-<YOURNET> and route-<YOURNET>
stay.
> > > That
> > > happens even when the both ifcfg, rule and route have the correct
> > > entry
> > > in /config/files and are bound to /config/etc/sysconfig/
> > >
> > > After reboot it returns to eth0 having the connectivity as it was
> > > defined
> > > with the TUI.
> > >
> > > For libvirt networks a bit of the same as for ifcfg files. Before
> > > reboot
> > > /etc/libvirt/qemu/networks is present in /config/files and findmnt
> > > reports
> > > that /etc/libvirt/qemu/networks is a bound mount
> > > of /config/etc/libvirt/qemu/networks.
> > > After reboot it is not the case anymore.
> > >
> > > @Fabian: Do you think there is something on the reboot that
> restores
> > > the
> > > network conf to the TUI settings?
> >
> > Hey Antoni,
> >
> > I vaguely remember that we had a problem with Node removing some
> ifcfg-*
> > files. But this should have been solved in the TestDay iso.
> >
> > What ISO did you use to reproduce this problem?
>
> We reproduced on Francisco's setup, I think it was oVirt node 3.0.1
Right.
I believe the bug you are seeing is:
http://gerrit.ovirt.org/#/c/20068/
This has been merged into out stable branch, but the release of a new
oVirt Node ISO for 3.3 is pending because of the vdsm-python-cpopen
dependency problem.
We plan to do a build early next week.
- fabian
12:16 p.m.
New subject: [Users] [vdsm] ovirtmgmt vanishes after reboot
On Wed, Jan 29, 2014 at 11:07:08AM +0100, Fabian Deutsch wrote:
Am Mittwoch, den 29.01.2014, 05:02 -0500 schrieb Antoni Segura
Puimedon:
Right.
I believe the bug you are seeing is:
http://gerrit.ovirt.org/#/c/20068/
This has been merged into out stable branch, but the release of a new
oVirt Node ISO for 3.3 is pending because of the vdsm-python-cpopen
dependency problem.
Would you agree to patch `yum` on your build machine? I do not fully
understand the issue, but with the following patch, the dependency
problem is resolved for me:
diff --git a/yum/depsolve.py b/yum/depsolve.py
index 95c21bc..57cf379 100644
--- a/yum/depsolve.py
+++ b/yum/depsolve.py
@@ -720,7 +720,7 @@ class Depsolve(object):
else:
self.verbose_logger.debug(_('TSINFO: Marking %s as install for %s'),
best,
requiringPo)
- reqtuple = misc.string_to_prco_tuple(needname + str(needflags) +
needversion)
+ reqtuple = misc.string_to_prco_tuple(requirement)
txmbrs = self.install(best, provides_for=reqtuple)
for txmbr in txmbrs:
txmbr.setAsDep(po=requiringPo)
3985
days inactive
3991
days old
16 comments
6 participants
participants (6)
-
Antoni Segura Puimedon -
Dan Kenigsberg -
Fabian Deutsch -
Federico Alberto Sayd -
Francisco Pérez -
Itamar Heim