Dear All,
I have been using ovirt for many years. I've got six servers , two HPE
MSA storage and a fiber channel network with two Brocade 8/20q.
oVirt has got two domain storage, one volume for each MSA. Now I have
only one MSA online. As you know multipath was configured
throught vdsm.
This is the output of the multipath command from one of the servers:
[root@infm-vm04 etc]# multipath -ll
3600c0ff0003c465b6510f85b01000000 dm-2 HPE ,MSA 2050 SAN
size=14T features='1 queue_if_no_path' hwhandler='0' wp=rw
|-+- policy='service-time 0' prio=1 status=active
| `- 2:0:0:0 sdc 8:32 active ready running
|-+- policy='service-time 0' prio=1 status=enabled
| `- 1:0:0:0 sdb 8:16 active ready running
|-+- policy='service-time 0' prio=1 status=enabled
| `- 2:0:1:0 sdd 8:48 active ready running
`-+- policy='service-time 0' prio=1 status=enabled
`- 1:0:1:0 sde 8:64 active ready running
With this setup I think there is an active path and the other is in
standby state.
So, Id like to know if ovrt support active-active mode and how can I make
this settings ?
/This is the current multipath.conf//
//
//defaults {//
// polling_interval 5//
// no_path_retry 4//
// user_friendly_names no//
// flush_on_last_del yes//
// fast_io_fail_tmo 5//
// dev_loss_tmo 30//
// max_fds 4096//
//}//
//blacklist {//
// protocol "(scsi:adt|scsi:sbp)"//
//}//
//devices {//
// device {//
// all_devs yes//
// no_path_retry 4//
// }//
//}//
/
Thanks a lot.
Bye
Enrico
--
__________________________________________________________________________
Enrico Becchetti Servizio di Calcolo e Reti
Istituto Nazionale di Fisica Nucleare - Sezione di Perugia
Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY)
Phone:+39 075 5852777 Mobile: +39 075 9696225
FAX: +39 075 5847296 Microsoft Teams:becchett@infn.it
Mail: Enrico.Becchetti<at>pg.infn.it Skype:enrico_becchetti
Pagina web personale:https://www.pg.infn.it/home/enrico-becchetti
_________________________________________________________________________
Show replies by date