5:59 a.m.
Hello,
I currently run oVirt 3.5 on CentOS6. It is on a single host with a
self-hosted engine. Not an officially supported setup, but it is just a
home lab.
When the next release of oVirt comes out (3.6), I am thinking I may want
to upgrade to CentOS7 on both host and engine to take advantage of the
newer libraries and features of Centos7.
On the host, my storage is GlusterFS and is on the same physical HDD as
the OS, but on a different LVM partition.
If I were to do a fresh install on the OS partition, and run through the
initial steps to install oVirt and GlusterFS packages, when I get to
configuring GlusterFS, will it be able to pick up my existing bricks and
thus allow me to import that existing storage into oVirt?
Alternatively, is there a way to export my VMs to an external HDD, do a
completely fresh install, then import them VMs back in? I suspect I
would probably need to resort to a cloning tool like "CloneZilla"?
Downtime of the VMs is not an issue, since this is just a lab and there
is nothing production-wise running on it.
Thanks for your advise!
Regards,
Alan
12:26 p.m.
In theory you can do this, but it takes a bit of work.
I migrated a cent 6 system to a cent 7 and kept my gluster bricks intact by backing up and
restoring /etc/gluster and /var/lib/gluster, as well as the bricks themselves. Your milage
may vary. I was also working on a multi-server system and was in a position to rebuild the
bricks from the running systems if needed. And I needed to for one set, so it wasn’t
perfect. If you go this route, make sure you backup your engine and restore it as well, a
simple copy of your storage domain is not enough to keep a VM in ovirt (although you can
probably import the volume as an existing domain and get the disks back).
Might be safer to setup an export domain on an external drive and export your VMs to it,
then you can import them to a clean new system after your upgrade. Way less to go wrong
with this approach, so I’d probably recommend it.
-Darrell
On Mar 5, 2015, at 4:59 AM, Alan Murrell <lists(a)murrell.ca>
wrote:
Hello,
I currently run oVirt 3.5 on CentOS6. It is on a single host with a self-hosted engine.
Not an officially supported setup, but it is just a home lab.
When the next release of oVirt comes out (3.6), I am thinking I may want to upgrade to
CentOS7 on both host and engine to take advantage of the newer libraries and features of
Centos7.
On the host, my storage is GlusterFS and is on the same physical HDD as the OS, but on a
different LVM partition.
If I were to do a fresh install on the OS partition, and run through the initial steps to
install oVirt and GlusterFS packages, when I get to configuring GlusterFS, will it be able
to pick up my existing bricks and thus allow me to import that existing storage into
oVirt?
Alternatively, is there a way to export my VMs to an external HDD, do a completely fresh
install, then import them VMs back in? I suspect I would probably need to resort to a
cloning tool like "CloneZilla"?
Downtime of the VMs is not an issue, since this is just a lab and there is nothing
production-wise running on it.
Thanks for your advise!
Regards,
Alan
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
10:56 p.m.
Thanks for the reply, Darrell.
On 05/03/2015 9:26 AM, Darrell Budic wrote:
Might be safer to setup an export domain on an external drive and
export your VMs to it, then you can import them to a clean new system after your upgrade.
Way less to go wrong with this approach, so I’d probably recommend it.
Ah, I never thought of that. I do have a 2TB NAS drive that supports
NFS that I could setup as an export domain.
Thanks! I will give it a try!
-Alan
3583
days inactive
3584
days old
2 comments
2 participants
participants (2)
-
Alan Murrell -
Darrell Budic