2:23 p.m.
Hi,
oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of
weeks.
oVirt 4.4.0 release candidate was released yesterday and we'd like to
gather as much feedback as possible.
Please join us testing this release candidate next week, starting Sunday
May 10th 2020 till Friday May 15th 2020!
We are going to coordinate the testing effort with a public Trello board at
https://trello.com/b/5ZNJgPC3/ovirt-440-test-day
You'll find instructions on how to use the board there.
For joining the board you can use this link:
https://trello.com/invite/b/5ZNJgPC3/f1b1826ee4902f348c44607765a15099/ovi...
If you have not an environment dedicated to testing, remember you can set
up a few VMs and test the deployment with nested virtualization using your
production environment creating a virtual test environment. In this case
please be careful avoiding touching the production environment from the
testing one.
The oVirt team will monitor the Trello board, the #ovirt IRC channel on
irc.oftc.net server and the users(a)ovirt.org mailing list to assist with the
testing and debugging issues.
Basic instructions for setting up a minimal system are available in release
candidate announce at:
https://lists.ovirt.org/archives/list/announce@ovirt.org/message/3QORBKVK...
Release notes for this release candidate are available here:
https://ovirt.org/release/4.4.0/
Thanks
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
[image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
5:17 p.m.
Sandro,
first install of 4.4 under Fedora 30 failed looking for python-ndf.
Second I followed the recommended Centos 8 min image all installed fine system is up and
running with new UI and it appears to be very clean.
Starting VM setup later this week.
Thanks
Bryan
9:59 a.m.
Il giorno sab 9 mag 2020 alle ore 16:19 kelley bryan <
kelley.bryan10(a)gmail.com> ha scritto:
Sandro,
first install of 4.4 under Fedora 30 failed looking for python-ndf.
Yes, sadly Fedora is not supported anymore
Second I followed the recommended Centos 8 min image all installed
fine
system is up and running with new UI and it appears to be very clean.
Starting VM setup later this week.
Thanks
Bryan
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BOQE5VON6XJ...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
[image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.
<https://mojo.redhat.com/docs/DOC-1199578>*
11:24 a.m.
On Fri, May 8, 2020 at 2:28 PM Sandro Bonazzola <sbonazzo(a)redhat.com> wrote:
Hi,
oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of weeks.
oVirt 4.4.0 release candidate was released yesterday and we'd like to gather as much
feedback as possible.
Please join us testing this release candidate next week, starting Sunday May 10th 2020
till Friday May 15th 2020!
We are going to coordinate the testing effort with a public Trello board at
https://trello.com/b/5ZNJgPC3/ovirt-440-test-day
You'll find instructions on how to use the board there.
For joining the board you can use this link:
https://trello.com/invite/b/5ZNJgPC3/f1b1826ee4902f348c44607765a15099/ovi...
If you have not an environment dedicated to testing, remember you can set up a few VMs
and test the deployment with nested virtualization using your production environment
creating a virtual test environment. In this case please be careful avoiding touching the
production environment from the testing one.
The oVirt team will monitor the Trello board, the #ovirt IRC channel on irc.oftc.net
server and the users(a)ovirt.org mailing list to assist with the testing and debugging
issues.
Basic instructions for setting up a minimal system are available in release candidate
announce at:
https://lists.ovirt.org/archives/list/announce@ovirt.org/message/3QORBKVK...
Release notes for this release candidate are available here:
https://ovirt.org/release/4.4.0/
Thanks
Hello,
1. Can I later upgrade 4.4RC to 4.4GA?
2. I plan to deploy yet-another-single-host setup (via NFS), is it
officially supported by 4.4 RC?
- Gilboa
7:10 p.m.
Il giorno lun 11 mag 2020 alle ore 11:45 Gilboa Davara <gilboad(a)gmail.com>
ha scritto:
On Fri, May 8, 2020 at 2:28 PM Sandro Bonazzola
<sbonazzo(a)redhat.com>
wrote:
>
> Hi,
> oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of
weeks.
> oVirt 4.4.0 release candidate was released yesterday and we'd like to
gather as much feedback as possible.
> Please join us testing this release candidate next week, starting Sunday
May 10th 2020 till Friday May 15th 2020!
> We are going to coordinate the testing effort with a public Trello board
at https://trello.com/b/5ZNJgPC3/ovirt-440-test-day
> You'll find instructions on how to use the board there.
> For joining the board you can use this link:
https://trello.com/invite/b/5ZNJgPC3/f1b1826ee4902f348c44607765a15099/ovi...
>
> If you have not an environment dedicated to testing, remember you can
set up a few VMs and test the deployment with nested virtualization using
your production environment creating a virtual test environment. In this
case please be careful avoiding touching the production environment from
the testing one.
>
> The oVirt team will monitor the Trello board, the #ovirt IRC channel on
irc.oftc.net server and the users(a)ovirt.org mailing list to assist with
the testing and debugging issues.
> Basic instructions for setting up a minimal system are available in
release candidate announce at:
https://lists.ovirt.org/archives/list/announce@ovirt.org/message/3QORBKVK...
> Release notes for this release candidate are available here:
https://ovirt.org/release/4.4.0/
>
> Thanks
Hello,
1. Can I later upgrade 4.4RC to 4.4GA?
It will require some additional steps but yes, it's supposed to be
upgradable from RC to GA.
Actually, if no critical bug is found during this test week, RC can be
promoted to GA.
2. I plan to deploy yet-another-single-host setup (via NFS), is it
officially supported by 4.4 RC?
Can you please detail what you're trying to achieve? sort of hyperconverged
deployment based on NFS instead of GlusterFS?
If so, no, it's not officially supported.
- Gilboa
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/U3W74GRRT7Q...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
[image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.
<https://mojo.redhat.com/docs/DOC-1199578>*
8:31 a.m.
On Mon, May 11, 2020 at 7:10 PM Sandro Bonazzola <sbonazzo(a)redhat.com> wrote:
>
> Hello,
>
> 1. Can I later upgrade 4.4RC to 4.4GA?
It will require some additional steps but yes, it's supposed to be upgradable from RC
to GA.
Actually, if no critical bug is found during this test week, RC can be promoted to GA.
Thanks!
Can you please detail what you're trying to achieve? sort of
hyperconverged deployment based on NFS instead of GlusterFS?
If so, no, it's not officially supported.
Thanks. I have a followup question, but I'll move it to another thread.
- Gilboa
8:52 a.m.
New subject: Single node hyper converged deployment best practices.
Hello all,
On Mon, May 11, 2020 at 7:10 PM Sandro Bonazzola
<sbonazzo(a)redhat.com> wrote:
Can you please detail what you're trying to achieve? sort of
hyperconverged
deployment based on NFS instead of GlusterFS?
If so, no, it's not officially supported.
Long story short: I've got a number of oVirt setups, a couple of "big"
GlusterFS based multi-node clusters (used for production) and a couple
of small single node ones (via localhost NFS) that are used to backup,
staging, testing, etc.
As I'm planning a (slow...) upgrade path to 4.4, what is the supported
/ best practice method to install oVirt on a single node? single-node
GlusterFS, localhost NFS or local file system (which I never tried for
no good reason)? Which tends to perform better?
I must admit that even with 20-30 active VMs (and a lot of IO), thus
far, localhost NFS served me (very) well.
BTW, per oVirt documentation [1], these no much information about the
preferred method.
[1] https://www.ovirt.org/documentation/admin-guide/chap-Storage.html
Thanks,
Gilboa
5:36 p.m.
On 8-5-2020 13:23, Sandro Bonazzola wrote:
Hi,
oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of
weeks.
I followed the same procedure as for the beta releases and have come
across a new problem.
Following the HCI setup using cockit in step 3 of deplying the VM
ansible reports an error about missing /etc/pki/CA/cacert.pem which
indeed does not exist.
Can't find where this is supposed to come from and before creating my
own and trying the install again I would like to know if I'm doing
something wrong.
In essence I installed Centos-8.1 from the link provided in the email.
Regards,
Joop
6:02 p.m.
On Mon, May 11, 2020 at 4:38 PM Joop <jvdwege(a)xs4all.nl> wrote:
On 8-5-2020 13:23, Sandro Bonazzola wrote:
> Hi,
> oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of
> weeks.
>
I followed the same procedure as for the beta releases and have come
across a new problem.
Following the HCI setup using cockit in step 3 of deplying the VM
ansible reports an error about missing /etc/pki/CA/cacert.pem which
indeed does not exist.
Can't find where this is supposed to come from and before creating my
own and trying the install again I would like to know if I'm doing
something wrong.
In essence I installed Centos-8.1 from the link provided in the email.
Regards,
Joop
I have had a similar behaviour in one of my tests, but I have not
identified the reason.
I re-executed the deployment, after cleaning disks, apparently with same
parameters and all went good in the second attempt and the /etc/pki/CA/
structure had been created.
Unfortunately I scratched the first install to deploy over, but if you have
yet your files you can compare contents of messages and / or send to
developers, to compare what ewxpected by ansible and what happened actually.
The stage where it is created is around the end of prepare VM stage when
libvirtd is started on host.
For a successful configuration you would have this line in messages of host
May 8 16:44:50 novirt2 platform-python[27382]: ansible-command Invoked
with _raw_params=virsh -r net-dhcp-leases default | grep -i
00:16:3e:79:dc:d0 | awk '{ print $5 }' | cut -f1 -d'/' _uses_shell=True
warn=True stdin_add_newline=True strip_empty_ends=True argv=None chdir=None
executable=None creates=None removes=None stdin=None
with the temporary ip assigned to the local vm few lines under it
and around 10 minutes later you will have:
May 8 16:55:11 novirt2 ansible-async_wrapper.py[28148]: 28149 still
running (86225)
May 8 16:55:11 novirt2 python3[53024]: ansible-file Invoked with
dest=/etc/pki/libvirt/private state=directory owner=vdsm group=kv
m path=/etc/pki/libvirt/private recurse=False force=False follow=True
modification_time_format=%Y%m%d%H%M.%S access_time_format=%Y%
m%d%H%M.%S _original_basename=None _diff_peek=None src=None
modification_time=None access_time=None mode=None seuser=None serole=No
ne selevel=None setype=None attributes=None content=NOT_LOGGING_PARAMETER
backup=None remote_src=None regexp=None delimiter=None di
rectory_mode=None unsafe_writes=None
May 8 16:55:15 novirt2 python3[53956]: ansible-file Invoked with
dest=/etc/pki/libvirt/../CA state=directory owner=vdsm group=kvm
path=/etc/pki/libvirt/../CA recurse=False force=False follow=True
modification_time_format=%Y%m%d%H%M.%S access_time_format=%Y%m%d%H%M.%S
_original_basename=None _diff_peek=None src=None modification_time=None
access_time=None mode=None seuser=None serole=None selevel=None setype=None
attributes=None content=NOT_LOGGING_PARAMETER backup=None remote_src=None
regexp=None delimiter=None directory_mode=None unsafe_writes=None
May 8 16:55:16 novirt2 ansible-async_wrapper.py[28148]: 28149 still
running (86220)
May 8 16:55:17 novirt2 platform-python[54420]: ansible-ovirt_host_info
Invoked with pattern=name=novirt2.example.net auth={'token':
'Q56I1YcOPmPxQAPlXbNaB5hmXl8LcCWtSnGsrG3lTRIzo__crr_2RSKNo0e6C4TvmanadThlCCxSv5IhxOr5Ow',
'url': 'https://novengine2.example.net/ovirt-engine/api',
'ca_file': None,
'insecure': True, 'timeout': 0, 'compress': True,
'kerberos': False,
'headers': None} fetch_nested=False nested_attributes=[] all_content=False
cluster_version=None
In my failed run these latest lines were missing, but I didn't dig into
why... and then libvirtd was unable to start again because of the missing
CA
Gianluca
7:12 p.m.
+Martin Perina <mperina(a)redhat.com> , +Douglas Schilling Landgraf
<dougsland(a)gmail.com> , +Lev Veyde <lveyde(a)redhat.com> can you please look
into this?
Il giorno lun 11 mag 2020 alle ore 17:05 Gianluca Cecchi <
gianluca.cecchi(a)gmail.com> ha scritto:
On Mon, May 11, 2020 at 4:38 PM Joop <jvdwege(a)xs4all.nl>
wrote:
> On 8-5-2020 13:23, Sandro Bonazzola wrote:
> > Hi,
> > oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of
> > weeks.
> >
> I followed the same procedure as for the beta releases and have come
> across a new problem.
> Following the HCI setup using cockit in step 3 of deplying the VM
> ansible reports an error about missing /etc/pki/CA/cacert.pem which
> indeed does not exist.
> Can't find where this is supposed to come from and before creating my
> own and trying the install again I would like to know if I'm doing
> something wrong.
> In essence I installed Centos-8.1 from the link provided in the email.
>
> Regards,
>
> Joop
>
>
I have had a similar behaviour in one of my tests, but I have not
identified the reason.
I re-executed the deployment, after cleaning disks, apparently with same
parameters and all went good in the second attempt and the /etc/pki/CA/
structure had been created.
Unfortunately I scratched the first install to deploy over, but if you
have yet your files you can compare contents of messages and / or send to
developers, to compare what ewxpected by ansible and what happened actually.
The stage where it is created is around the end of prepare VM stage when
libvirtd is started on host.
For a successful configuration you would have this line in messages of host
May 8 16:44:50 novirt2 platform-python[27382]: ansible-command Invoked
with _raw_params=virsh -r net-dhcp-leases default | grep -i
00:16:3e:79:dc:d0 | awk '{ print $5 }' | cut -f1 -d'/' _uses_shell=True
warn=True stdin_add_newline=True strip_empty_ends=True argv=None chdir=None
executable=None creates=None removes=None stdin=None
with the temporary ip assigned to the local vm few lines under it
and around 10 minutes later you will have:
May 8 16:55:11 novirt2 ansible-async_wrapper.py[28148]: 28149 still
running (86225)
May 8 16:55:11 novirt2 python3[53024]: ansible-file Invoked with
dest=/etc/pki/libvirt/private state=directory owner=vdsm group=kv
m path=/etc/pki/libvirt/private recurse=False force=False follow=True
modification_time_format=%Y%m%d%H%M.%S access_time_format=%Y%
m%d%H%M.%S _original_basename=None _diff_peek=None src=None
modification_time=None access_time=None mode=None seuser=None serole=No
ne selevel=None setype=None attributes=None content=NOT_LOGGING_PARAMETER
backup=None remote_src=None regexp=None delimiter=None di
rectory_mode=None unsafe_writes=None
May 8 16:55:15 novirt2 python3[53956]: ansible-file Invoked with
dest=/etc/pki/libvirt/../CA state=directory owner=vdsm group=kvm
path=/etc/pki/libvirt/../CA recurse=False force=False follow=True
modification_time_format=%Y%m%d%H%M.%S access_time_format=%Y%m%d%H%M.%S
_original_basename=None _diff_peek=None src=None modification_time=None
access_time=None mode=None seuser=None serole=None selevel=None setype=None
attributes=None content=NOT_LOGGING_PARAMETER backup=None remote_src=None
regexp=None delimiter=None directory_mode=None unsafe_writes=None
May 8 16:55:16 novirt2 ansible-async_wrapper.py[28148]: 28149 still
running (86220)
May 8 16:55:17 novirt2 platform-python[54420]: ansible-ovirt_host_info
Invoked with pattern=name=novirt2.example.net auth={'token':
'Q56I1YcOPmPxQAPlXbNaB5hmXl8LcCWtSnGsrG3lTRIzo__crr_2RSKNo0e6C4TvmanadThlCCxSv5IhxOr5Ow',
'url': 'https://novengine2.example.net/ovirt-engine/api',
'ca_file':
None, 'insecure': True, 'timeout': 0, 'compress': True,
'kerberos': False,
'headers': None} fetch_nested=False nested_attributes=[] all_content=False
cluster_version=None
In my failed run these latest lines were missing, but I didn't dig into
why... and then libvirtd was unable to start again because of the missing
CA
Gianluca
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NELL3ZI74MF...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
[image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.
<https://mojo.redhat.com/docs/DOC-1199578>*
4:10 a.m.
On Mon, May 11, 2020 at 12:14 PM Sandro Bonazzola <sbonazzo(a)redhat.com>
wrote:
+Martin Perina <mperina(a)redhat.com> , +Douglas Schilling
Landgraf
<dougsland(a)gmail.com> , +Lev Veyde <lveyde(a)redhat.com> can you please
look into this?
Sure. Tried to reproduce the pki issue reported but still not able. We will
need the logs to go further.
# cat /etc/os-release
NAME="CentOS Linux"
VERSION="8 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="8"
PLATFORM_ID="platform:el8"
PRETTY_NAME="CentOS Linux 8 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:8"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"
CENTOS_MANTISBT_PROJECT="CentOS-8"
CENTOS_MANTISBT_PROJECT_VERSION="8"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="8"
# rpm -qa | grep engine
ovirt-engine-websocket-proxy-4.4.0-1.el8.noarch
ovirt-engine-4.4.0-1.el8.noarch
ovirt-engine-extension-aaa-jdbc-1.2.0-1.el8.noarch
python3-ovirt-engine-lib-4.4.0-1.el8.noarch
ovirt-engine-vmconsole-proxy-helper-4.4.0-1.el8.noarch
ovirt-engine-dwh-setup-4.4.0.2-1.el8.noarch
ovirt-engine-dbscripts-4.4.0-1.el8.noarch
ovirt-engine-tools-4.4.0-1.el8.noarch
ovirt-engine-wildfly-overlay-18.0.1-1.el8.noarch
ovirt-engine-setup-plugin-ovirt-engine-common-4.4.0-1.el8.noarch
ovirt-engine-api-explorer-0.0.6-1.el8.noarch
ovirt-engine-setup-plugin-ovirt-engine-4.4.0-1.el8.noarch
ovirt-engine-setup-plugin-websocket-proxy-4.4.0-1.el8.noarch
ovirt-ansible-hosted-engine-setup-1.1.3-1.el8.noarch
ovirt-engine-setup-4.4.0-1.el8.noarch
ovirt-engine-webadmin-portal-4.4.0-1.el8.noarch
ovirt-engine-dwh-4.4.0.2-1.el8.noarch
ovirt-engine-metrics-1.4.0.2-1.el8.noarch
ovirt-engine-restapi-4.4.0-1.el8.noarch
ovirt-engine-ui-extensions-1.1.0-1.el8.noarch
ovirt-engine-extensions-api-1.0.1-1.el8.noarch
ovirt-engine-tools-backup-4.4.0-1.el8.noarch
ovirt-engine-setup-plugin-imageio-4.4.0-1.el8.noarch
ovirt-engine-backend-4.4.0-1.el8.noarch
ovirt-ansible-engine-setup-1.2.3-1.el8.noarch
ovirt-engine-setup-plugin-cinderlib-4.4.0-1.el8.noarch
ovirt-engine-wildfly-18.0.1-1.el8.x86_64
python3-ovirt-engine-sdk4-4.4.2-1.el8.x86_64
ovirt-engine-setup-base-4.4.0-1.el8.noarch
ovirt-engine-setup-plugin-vmconsole-proxy-helper-4.4.0-1.el8.noarch
# systemctl status ovirt-engine
● ovirt-engine.service - oVirt Engine
Loaded: loaded (/usr/lib/systemd/system/ovirt-engine.service; enabled;
vendor preset: disabled)
Active: active (running) since Mon 2020-05-11 21:06:37 EDT; 3min 23s ago
Main PID: 12392 (ovirt-engine.py)
Tasks: 172 (limit: 26213)
Memory: 1.4G
CGroup: /system.slice/ovirt-engine.service
├─12392 /usr/libexec/platform-python
/usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py
--redirect-output --systemd=notify start
└─12571 ovirt-engine --add-modules java.se -server
-XX:+TieredCompilation -Xms3633M -Xmx3633M -Xss1M -Djava.awt.headless=true
-Dsun.rmi.dgc.client.gcInterval=3600000
-Dsun.rmi.dgc.server.gcInterval=3600000 -Djsse.enableSNIExtension=false
-Dresteasy.preferJacksonOverJsonB=true -Djackson.deserialization.whit>
May 11 21:06:33 rhevm44.medogz.home systemd[1]: Starting oVirt Engine...
May 11 21:06:35 rhevm44.medogz.home ovirt-engine.py[12392]: 2020-05-11
21:06:35,113-0400 ovirt-engine: INFO _detectJBossVersion:186 Detecting
JBoss version. Running:
/usr/lib/jvm/jre-11-openjdk-11.0.7.10-1.el8_1.x86_64/bin/java
['ovirt-engine-version', '--add-modules', 'java.se',
'-server',
'-XX:+TieredCompilation', >
May 11 21:06:37 rhevm44.medogz.home ovirt-engine.py[12392]: 2020-05-11
21:06:37,253-0400 ovirt-engine: INFO _detectJBossVersion:206 Return code:
0, | stdout: '['WildFly Full 18.0.1.Final (WildFly Core 10.0.3.Final)'],
| stderr: '[]'
May 11 21:06:37 rhevm44.medogz.home systemd[1]: Started oVirt Engine.
Il giorno lun 11 mag 2020 alle ore 17:05 Gianluca Cecchi <
gianluca.cecchi(a)gmail.com> ha scritto:
> On Mon, May 11, 2020 at 4:38 PM Joop <jvdwege(a)xs4all.nl> wrote:
>
>> On 8-5-2020 13:23, Sandro Bonazzola wrote:
>> > Hi,
>> > oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of
>> > weeks.
>> >
>> I followed the same procedure as for the beta releases and have come
>> across a new problem.
>> Following the HCI setup using cockit in step 3 of deplying the VM
>> ansible reports an error about missing /etc/pki/CA/cacert.pem which
>> indeed does not exist.
>> Can't find where this is supposed to come from and before creating my
>> own and trying the install again I would like to know if I'm doing
>> something wrong.
>> In essence I installed Centos-8.1 from the link provided in the email.
>>
>> Regards,
>>
>> Joop
>>
>>
> I have had a similar behaviour in one of my tests, but I have not
> identified the reason.
> I re-executed the deployment, after cleaning disks, apparently with same
> parameters and all went good in the second attempt and the /etc/pki/CA/
> structure had been created.
> Unfortunately I scratched the first install to deploy over, but if you
> have yet your files you can compare contents of messages and / or send to
> developers, to compare what ewxpected by ansible and what happened actually.
> The stage where it is created is around the end of prepare VM stage when
> libvirtd is started on host.
>
> For a successful configuration you would have this line in messages of
> host
>
> May 8 16:44:50 novirt2 platform-python[27382]: ansible-command Invoked
> with _raw_params=virsh -r net-dhcp-leases default | grep -i
> 00:16:3e:79:dc:d0 | awk '{ print $5 }' | cut -f1 -d'/'
_uses_shell=True
> warn=True stdin_add_newline=True strip_empty_ends=True argv=None chdir=None
> executable=None creates=None removes=None stdin=None
>
> with the temporary ip assigned to the local vm few lines under it
>
> and around 10 minutes later you will have:
>
> May 8 16:55:11 novirt2 ansible-async_wrapper.py[28148]: 28149 still
> running (86225)
> May 8 16:55:11 novirt2 python3[53024]: ansible-file Invoked with
> dest=/etc/pki/libvirt/private state=directory owner=vdsm group=kv
> m path=/etc/pki/libvirt/private recurse=False force=False follow=True
> modification_time_format=%Y%m%d%H%M.%S access_time_format=%Y%
> m%d%H%M.%S _original_basename=None _diff_peek=None src=None
> modification_time=None access_time=None mode=None seuser=None serole=No
> ne selevel=None setype=None attributes=None content=NOT_LOGGING_PARAMETER
> backup=None remote_src=None regexp=None delimiter=None di
> rectory_mode=None unsafe_writes=None
> May 8 16:55:15 novirt2 python3[53956]: ansible-file Invoked with
> dest=/etc/pki/libvirt/../CA state=directory owner=vdsm group=kvm
> path=/etc/pki/libvirt/../CA recurse=False force=False follow=True
> modification_time_format=%Y%m%d%H%M.%S access_time_format=%Y%m%d%H%M.%S
> _original_basename=None _diff_peek=None src=None modification_time=None
> access_time=None mode=None seuser=None serole=None selevel=None setype=None
> attributes=None content=NOT_LOGGING_PARAMETER backup=None remote_src=None
> regexp=None delimiter=None directory_mode=None unsafe_writes=None
> May 8 16:55:16 novirt2 ansible-async_wrapper.py[28148]: 28149 still
> running (86220)
> May 8 16:55:17 novirt2 platform-python[54420]: ansible-ovirt_host_info
> Invoked with pattern=name=novirt2.example.net auth={'token':
>
'Q56I1YcOPmPxQAPlXbNaB5hmXl8LcCWtSnGsrG3lTRIzo__crr_2RSKNo0e6C4TvmanadThlCCxSv5IhxOr5Ow',
> 'url': 'https://novengine2.example.net/ovirt-engine/api',
'ca_file':
> None, 'insecure': True, 'timeout': 0, 'compress': True,
'kerberos': False,
> 'headers': None} fetch_nested=False nested_attributes=[] all_content=False
> cluster_version=None
>
> In my failed run these latest lines were missing, but I didn't dig into
> why... and then libvirtd was unable to start again because of the missing
> CA
>
> Gianluca
>
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NELL3ZI74MF...
>
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
[image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.
<https://mojo.redhat.com/docs/DOC-1199578>*
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGRMQ6Q6TJT...
--
Cheers
Douglas
5:16 p.m.
On behalf of the oVirt team, thank you everyone who joined testing 4.4
release candidate last week.
Developers have been continuously reviewing the reported issues and fixed
most of them in the second release candidate published last week.
The oVirt 4.4 will be more stable thanks to your help!
Thanks,
Il giorno ven 8 mag 2020 alle ore 13:23 Sandro Bonazzola <
sbonazzo(a)redhat.com> ha scritto:
Hi,
oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of
weeks.
oVirt 4.4.0 release candidate was released yesterday and we'd like to
gather as much feedback as possible.
Please join us testing this release candidate next week, starting Sunday
May 10th 2020 till Friday May 15th 2020!
We are going to coordinate the testing effort with a public Trello board
at https://trello.com/b/5ZNJgPC3/ovirt-440-test-day
You'll find instructions on how to use the board there.
For joining the board you can use this link:
https://trello.com/invite/b/5ZNJgPC3/f1b1826ee4902f348c44607765a15099/ovi...
If you have not an environment dedicated to testing, remember you can set
up a few VMs and test the deployment with nested virtualization using
your production environment creating a virtual test environment. In this
case please be careful avoiding touching the production environment from
the testing one.
The oVirt team will monitor the Trello board, the #ovirt IRC channel on
irc.oftc.net server and the users(a)ovirt.org mailing list to assist with
the testing and debugging issues.
Basic instructions for setting up a minimal system are available in
release candidate announce at:
https://lists.ovirt.org/archives/list/announce@ovirt.org/message/3QORBKVK...
Release notes for this release candidate are available here:
https://ovirt.org/release/4.4.0/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
[image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
7:01 p.m.
Hi,
I am a bit late but today a tried to install single host HCI with gluster.
I am not sure if it is currently supported but
* I installed
dnf install https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm
dnf module enable -y javapackages-tools pki-deps postgresql:12 389-ds
dnf install ovirt-engine-appliance vdsm-gluster
* I prepared host by gdeploy (from external Fedora workstation because I
didn't find gdeploy in any CentOS8 repo)
* I tried to instal ovvirt via
ovirt-hosted-engine-setup
...but process failed with
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
"Unable to start service libvirtd: Job for libvirtd.service failed
because the control process exited with error code.\nSee \"systemctl
status libvirtd.service\" and \"journalctl -xe\" for details.\n"}
[ ERROR ] Failed to execute stage 'Closing up': Failed executing
ansible-playbook
In messages log is mentioned
...
May 18 17:04:40 ovirt-hci01 journal[8062]: Cannot read CA certificate
'/etc/pki/CA/cacert.pem': No such file or directory
May 18 17:04:40 ovirt-hci01 systemd[1]: libvirtd.service: Main process
exited, code=exited, status=6/NOTCONFIGURED
...
There is no /etc/pki/CA directory. I think CA should be installed during
ovirt-hosted-engine-setup, isn't it? Should I do that manually? How?
Cheers,
Jiri
On 5/8/20 1:23 PM, Sandro Bonazzola wrote:
Hi,
oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of
weeks.
oVirt 4.4.0 release candidate was released yesterday and we'd like to
gather as much feedback as possible.
Please join us testing this release candidate next week, starting Sunday
May 10th 2020 till Friday May 15th 2020!
We are going to coordinate the testing effort with a public Trello board
at https://trello.com/b/5ZNJgPC3/ovirt-440-test-day
You'll find instructions on how to use the board there.
For joining the board you can use this
link: https://trello.com/invite/b/5ZNJgPC3/f1b1826ee4902f348c44607765a150...
If you have not an environment dedicated to testing, remember you can
set up a few VMs and test the deployment with nested virtualization
using your production environment creating a virtual test environment.
In this case please be careful avoiding touching the production
environment from the testing one.
The oVirt team will monitor the Trello board, the #ovirt IRC channel on
irc.oftc.net <http://irc.oftc.net> server and the users(a)ovirt.org
<mailto:users@ovirt.org> mailing list to assist with the testing and
debugging issues.
Basic instructions for setting up a minimal system are available in
release candidate announce
at: https://lists.ovirt.org/archives/list/announce@ovirt.org/message/3QOR...
Release notes for this release candidate are available
here: https://ovirt.org/release/4.4.0/
Thanks
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>
<https://www.redhat.com/>
|Our code is open_ <https://www.redhat.com/en/our-code-is-open>
**
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.
*
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WCQSRKSTCSH...
7:26 p.m.
Il giorno lun 18 mag 2020 alle ore 18:12 Jiří Sléžka <jiri.slezka(a)slu.cz>
ha scritto:
Hi,
I am a bit late but today a tried to install single host HCI with gluster.
I am not sure if it is currently supported but
* I installed
dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm
dnf module enable -y javapackages-tools pki-deps postgresql:12 389-ds
these modules are not needed on the host, these are needed only on the
standalone engine / within engine appliance
dnf install ovirt-engine-appliance vdsm-gluster
May I ask which installation guide are you following? I'm pretty sure it's
outdated and needs a refresh.
* I prepared host by gdeploy (from external Fedora workstation because I
didn't find gdeploy in any CentOS8 repo)
gdeploy has been deprecated in favor of gluster-ansible roles about 2 years
ago
* I tried to instal ovvirt via
ovirt-hosted-engine-setup
...but process failed with
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false,
"msg":
"Unable to start service libvirtd: Job for libvirtd.service failed
because the control process exited with error code.\nSee \"systemctl
status libvirtd.service\" and \"journalctl -xe\" for details.\n"}
[ ERROR ] Failed to execute stage 'Closing up': Failed executing
ansible-playbook
In messages log is mentioned
...
May 18 17:04:40 ovirt-hci01 journal[8062]: Cannot read CA certificate
'/etc/pki/CA/cacert.pem': No such file or directory
May 18 17:04:40 ovirt-hci01 systemd[1]: libvirtd.service: Main process
exited, code=exited, status=6/NOTCONFIGURED
...
There is no /etc/pki/CA directory. I think CA should be installed during
ovirt-hosted-engine-setup, isn't it? Should I do that manually? How?
Cheers,
Jiri
On 5/8/20 1:23 PM, Sandro Bonazzola wrote:
> Hi,
> oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of
> weeks.
> oVirt 4.4.0 release candidate was released yesterday and we'd like to
> gather as much feedback as possible.
> Please join us testing this release candidate next week, starting Sunday
> May 10th 2020 till Friday May 15th 2020!
> We are going to coordinate the testing effort with a public Trello board
> at https://trello.com/b/5ZNJgPC3/ovirt-440-test-day
> You'll find instructions on how to use the board there.
> For joining the board you can use this
> link:
https://trello.com/invite/b/5ZNJgPC3/f1b1826ee4902f348c44607765a15099/ovi...
>
> If you have not an environment dedicated to testing, remember you can
> set up a few VMs and test the deployment with nested virtualization
> using your production environment creating a virtual test environment.
> In this case please be careful avoiding touching the production
> environment from the testing one.
>
> The oVirt team will monitor the Trello board, the #ovirt IRC channel on
> irc.oftc.net <http://irc.oftc.net> server and the users(a)ovirt.org
> <mailto:users@ovirt.org> mailing list to assist with the testing and
> debugging issues.
> Basic instructions for setting up a minimal system are available in
> release candidate announce
> at:
https://lists.ovirt.org/archives/list/announce@ovirt.org/message/3QORBKVK...
> Release notes for this release candidate are available
> here: https://ovirt.org/release/4.4.0/
>
> Thanks
> --
>
> Sandro Bonazzola
>
> MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
>
> Red Hat EMEA <https://www.redhat.com/>
>
> sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>
>
> <https://www.redhat.com/>
> |Our code is open_ <https://www.redhat.com/en/our-code-is-open>
>
> **
> *Red Hat respects your work life balance. Therefore there is no need to
> answer this email out of your office hours.
> *
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WCQSRKSTCSH...
>
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XQUHTOUUMJG...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
[image: |Our code is open_] <https://www.redhat.com/en/our-code-is-open>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.
<https://mojo.redhat.com/docs/DOC-1199578>*
11:46 a.m.
Hi,
On 5/18/20 6:26 PM, Sandro Bonazzola wrote:
Il giorno lun 18 mag 2020 alle ore 18:12 Jiří Sléžka <jiri.slezka(a)slu.cz
<mailto:jiri.slezka@slu.cz>> ha scritto:
Hi,
I am a bit late but today a tried to install single host HCI with
gluster.
I am not sure if it is currently supported but
* I installed
dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release44-pre.rpm
dnf module enable -y javapackages-tools pki-deps postgresql:12 389-ds
these modules are not needed on the host, these are needed only on the
standalone engine / within engine appliance
ok, thanks for info
dnf install ovirt-engine-appliance vdsm-gluster
May I ask which installation guide are you following? I'm pretty sure
it's outdated and needs a refresh.
I have followed mostly
https://ovirt.org/documentation/gluster-hyperconverged/Gluster_Hyperconve...
but also my own notes...
I know this guide is for 4.3 but I didn't find relevant guide for 4.4.
* I prepared host by gdeploy (from external Fedora workstation
because I
didn't find gdeploy in any CentOS8 repo)
gdeploy has been deprecated in favor of gluster-ansible roles about 2
years ago
ok, I told you I am bit late ;-)
If there is more relevant documentation, please share a link. I would
like help write some guide/blogpost about 4.4. install but probably in
czech language...
Thanks in advance,
Jiri
* I tried to instal ovvirt via
ovirt-hosted-engine-setup
...but process failed with
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false,
"msg":
"Unable to start service libvirtd: Job for libvirtd.service failed
because the control process exited with error code.\nSee \"systemctl
status libvirtd.service\" and \"journalctl -xe\" for
details.\n"}
[ ERROR ] Failed to execute stage 'Closing up': Failed executing
ansible-playbook
In messages log is mentioned
...
May 18 17:04:40 ovirt-hci01 journal[8062]: Cannot read CA certificate
'/etc/pki/CA/cacert.pem': No such file or directory
May 18 17:04:40 ovirt-hci01 systemd[1]: libvirtd.service: Main process
exited, code=exited, status=6/NOTCONFIGURED
...
There is no /etc/pki/CA directory. I think CA should be installed during
ovirt-hosted-engine-setup, isn't it? Should I do that manually? How?
Cheers,
Jiri
On 5/8/20 1:23 PM, Sandro Bonazzola wrote:
> Hi,
> oVirt team is planning to release oVirt 4.4.0 Ga in the next couple of
> weeks.
> oVirt 4.4.0 release candidate was released yesterday and we'd like to
> gather as much feedback as possible.
> Please join us testing this release candidate next week, starting
Sunday
> May 10th 2020 till Friday May 15th 2020!
> We are going to coordinate the testing effort with a public Trello
board
> at https://trello.com/b/5ZNJgPC3/ovirt-440-test-day
> You'll find instructions on how to use the board there.
> For joining the board you can use this
>
link: https://trello.com/invite/b/5ZNJgPC3/f1b1826ee4902f348c44607765a150...
>
> If you have not an environment dedicated to testing, remember you can
> set up a few VMs and test the deployment with nested virtualization
> using your production environment creating a virtual test environment.
> In this case please be careful avoiding touching the production
> environment from the testing one.
>
> The oVirt team will monitor the Trello board, the #ovirt IRC
channel on
> irc.oftc.net <http://irc.oftc.net> <http://irc.oftc.net> server
and the users(a)ovirt.org <mailto:users@ovirt.org>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>> mailing list to
assist with the testing and
> debugging issues.
> Basic instructions for setting up a minimal system are available in
> release candidate announce
>
at: https://lists.ovirt.org/archives/list/announce@ovirt.org/message/3QOR...
> Release notes for this release candidate are available
> here: https://ovirt.org/release/4.4.0/
>
> Thanks
> --
>
> Sandro Bonazzola
>
> MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
>
> Red Hat EMEA <https://www.redhat.com/>
>
> sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>
<mailto:sbonazzo@redhat.com <mailto:sbonazzo@redhat.com>>
>
> <https://www.redhat.com/>
> |Our code is open_ <https://www.redhat.com/en/our-code-is-open>
>
> **
> *Red Hat respects your work life balance. Therefore there is no
need to
> answer this email out of your office hours.
> *
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
> To unsubscribe send an email to users-leave(a)ovirt.org
<mailto:users-leave@ovirt.org>
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WCQSRKSTCSH...
>
_______________________________________________
Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-leave(a)ovirt.org
<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XQUHTOUUMJG...
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com <mailto:sbonazzo@redhat.com>
<https://www.redhat.com/>
|Our code is open_ <https://www.redhat.com/en/our-code-is-open>
**
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.
<https://mojo.redhat.com/docs/DOC-1199578>*
1644
days inactive
1655
days old
14 comments
7 participants
participants (7)
-
Douglas Landgraf -
Gianluca Cecchi -
Gilboa Davara -
Jiří Sléžka -
Joop -
kelley bryan -
Sandro Bonazzola