[Users] host raiding two LUN from different external storage
by Johan Kragsterman
Hi!
In some setups, like when you got two datacenters that works like failover sites, you would like to have two external raid controllers(storage devices), one in each datacenter.
You then send two identical LUN's, from each controller, to a cluster, let's say two hosts, for simplicity. What you normally do is to host raid these LUN's in mirror(raid 1), so the hosts write the same to both LUN's, and both controllers.
Question for me here is if I can accomplish this in oVirt management? Because if I can't, it will be a problem, because if I host raid at the host level, then the storage would be local storage for oVirt, wouldn't it? And then I suppose it can't be used for live migration, can it?
Regrds Johan
12 years, 4 months
[Users] Upgrading ovirt-engine from Centos dre repo
by Neil
Hi guys,
I'm running an older version of ovirt-engine on Centos 6.2 and I'd
like to upgrade ovirt-engine and the other corresponding packages
ovirt-engine-webadmin-portal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-dbscripts-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-tools-common-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-backend-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-log-collector-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-iso-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-cli-3.1.0.1-1alpha.el6.noarch
ovirt-engine-jbossas-1.2-2.fc16.x86_64
ovirt-engine-restapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-jboss-deps-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-config-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-image-uploader-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-sdk-3.1.0.1-1alpha.el6.noarch
ovirt-engine-userportal-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-notification-service-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-genericapi-3.1.0_0001-1.8.el6.x86_64
ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64
Using yum even if I do a yum update ovirt-engine* the only updates I get are...
ovirt-engine-cli noarch
3.1.0.6-1.el6 ovirt31-dre
144 k
ovirt-engine-sdk noarch
3.1.0.4-1.el6 ovirt31-dre
222 k
and yet I can see there are newer ovirt-engine packages available than
the ones I'm running, I've checked that the repo is enabled...
[ovirt-dre]
name=oVirt engine repo
baseurl=http://www.dreyou.org/ovirt/ovirt-engine/
http://www1.dreyou.org/ovirt/ovirt-engine/
enabled=1
gpgcheck=0
[ovirt31-dre]
name=oVirt 3.1 engine repo
baseurl=http://www.dreyou.org/ovirt/ovirt-engine31/
http://www1.dreyou.org/ovirt/ovirt-engine31/
enabled=1
gpgcheck=0
...and browsing the repo manually through a browser I see the
following packages under ovirt-engine31/
ovirt-engine-3.1.0-3.11.el6.noarch.rpm
ovirt-engine-3.1.0-3.11.el6.src.rpm
and under the ovirt-engine/ directory I see the following versions...
ovirt-engine-3.1.0-3.15.el6.noarch.rpm
ovirt-engine-3.1.0-3.15.el6.src.rpm
Anyone have any ideas why yum won't find the newer versions?
Thank you.
Regards.
Neil.
12 years, 4 months
[Users] [User] why VM image owner change to root after stop the vm
by T-Sinjon
Dear everyone:
Description
When i create a vm , the vm owner is vdsm:kvm(36:36)
when i start a vm , the vm owner change to qemu:qemu(107:107)
-rw-rw----. 1 qemu qemu 107374182400 Jul 25 2012 d1e6b671-6b48-4964-9c56-22847e9b83df
-rw-r--r--. 1 vdsm kvm 269 Jul 25 2012 d1e6b671-6b48-4964-9c56-22847e9b83df.meta
then i stop the vm , the vm owner change to root:root
-rw-rw----. 1 root root 107374182400 Jul 25 2012 d1e6b671-6b48-4964-9c56-22847e9b83df
-rw-r--r--. 1 vdsm kvm 269 Jul 25 2012 d1e6b671-6b48-4964-9c56-22847e9b83df.meta
then , i cannot start the vm , on the web logs event:
2012-Jul-25, 16:27:29
VM Git-Server is down. Exit message: 'truesize'.
2012-Jul-25, 16:27:28
VM Git-Server was restarted on Host ovirt-node-sun-1.local
2012-Jul-25, 16:27:28
Failed to run VM Git-Server on Host ovirt-node-sun-4.local.
and the ovirt-engine.log:
2012-07-25 16:27:24,359 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand] (ajp--0.0.0.0-8009-5) START, IsValidVDSCommand(storagePoolId = 3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d, ignoreFailoverLimit = false, compatabilityVersion = null), log id: 7d8f1a84
2012-07-25 16:27:24,364 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand] (ajp--0.0.0.0-8009-5) FINISH, IsValidVDSCommand, return: true, log id: 7d8f1a84
2012-07-25 16:27:24,441 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (ajp--0.0.0.0-8009-5) START, IsVmDuringInitiatingVDSCommand(vmId = 4f03fc62-a71e-4560-b807-5388526f6968), log id: 6c699650
2012-07-25 16:27:24,443 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (ajp--0.0.0.0-8009-5) FINISH, IsVmDuringInitiatingVDSCommand, return: false, log id: 6c699650
2012-07-25 16:27:24,491 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-48) [36951f95] Lock Acquired to object EngineLock [exclusiveLocks= key: 4f03fc62-a71e-4560-b807-5388526f6968 value: VM
, sharedLocks= ]
2012-07-25 16:27:24,515 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-48) [36951f95] Running command: RunVmCommand internal: false. Entities affected : ID: 4f03fc62-a71e-4560-b807-5388526f6968 Type: VM
2012-07-25 16:27:24,691 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsoPrefixVDSCommand] (pool-3-thread-48) [36951f95] START, IsoPrefixVDSCommand(storagePoolId = 3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d, ignoreFailoverLimit = false, compatabilityVersion = null), log id: 74d1cdf9
2012-07-25 16:27:24,695 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsoPrefixVDSCommand] (pool-3-thread-48) [36951f95] FINISH, IsoPrefixVDSCommand, return: /rhev/data-center/3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d/bb0c61bf-18d1-41da-8e92-b3da6e6abffb/images/11111111-1111-1111-1111-111111111111, log id: 74d1cdf9
2012-07-25 16:27:24,699 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-3-thread-48) [36951f95] START, CreateVmVDSCommand(vdsId = ebf0aae2-d4a6-11e1-8bef-0f498706821d, vmId=4f03fc62-a71e-4560-b807-5388526f6968, vm=org.ovirt.engine.core.common.businessentities.VM@4fb10fb7), log id: 7a29d259
2012-07-25 16:27:24,708 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (pool-3-thread-48) [36951f95] START, CreateVDSCommand(vdsId = ebf0aae2-d4a6-11e1-8bef-0f498706821d, vmId=4f03fc62-a71e-4560-b807-5388526f6968, vm=org.ovirt.engine.core.common.businessentities.VM@4fb10fb7), log id: 29395031
2012-07-25 16:27:24,789 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (pool-3-thread-48) [36951f95] org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand kvmEnable=true,nicModel=pv,pv,keyboardLayout=en-us,nice=0,timeOffset=-2,transparentHugePages=true,vmId=4f03fc62-a71e-4560-b807-5388526f6968,drives=[Ljava.util.Map;@1869fe1c,acpiEnable=true,custom={},spiceSslCipherSuite=DEFAULT,memSize=4096,boot=cd,smp=2,vmType=kvm,emulatedMachine=pc-0.14,display=vnc,tabletEnable=true,spiceSecureChannels=smain,sinputs,smpCoresPerSocket=1,spiceMonitors=1,cdrom=/rhev/data-center/3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d/bb0c61bf-18d1-41da-8e92-b3da6e6abffb/images/11111111-1111-1111-1111-111111111111/CentOS-6.2-x86_64-LiveDVD.iso,macAddr=00:1a:4a:1e:01:10,00:1a:4a:1e:01:11,bridge=network_10,ovirtmgmt,vmName=Git-Server,cpuType=Conroe
2012-07-25 16:27:24,799 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (pool-3-thread-48) [36951f95] FINISH, CreateVDSCommand, log id: 29395031
2012-07-25 16:27:24,807 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-3-thread-48) [36951f95] IncreasePendingVms::CreateVmIncreasing vds ovirt-node-sun-3.local pending vcpu count, now 2. Vm: Git-Server
2012-07-25 16:27:24,849 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-3-thread-48) [36951f95] FINISH, CreateVmVDSCommand, return: WaitForLaunch, log id: 7a29d259
2012-07-25 16:27:24,858 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-48) [36951f95] Lock freed to object EngineLock [exclusiveLocks= key: 4f03fc62-a71e-4560-b807-5388526f6968 value: VM
, sharedLocks= ]
2012-07-25 16:27:26,096 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (QuartzScheduler_Worker-37) [686128dd] START, DestroyVDSCommand(vdsId = ebf0aae2-d4a6-11e1-8bef-0f498706821d, vmId=4f03fc62-a71e-4560-b807-5388526f6968, force=false, secondsToWait=0, gracefully=false), log id: 168e7377
2012-07-25 16:27:26,181 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (QuartzScheduler_Worker-37) [686128dd] FINISH, DestroyVDSCommand, log id: 168e7377
2012-07-25 16:27:26,207 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-37) [686128dd] Running on vds during rerun failed vm: null
2012-07-25 16:27:26,211 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-37) [686128dd] vm Git-Server running in db and not running in vds - add to rerun treatment. vds ovirt-node-sun-3.local
2012-07-25 16:27:26,232 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-37) [686128dd] Rerun vm 4f03fc62-a71e-4560-b807-5388526f6968. Called from vds ovirt-node-sun-3.local
2012-07-25 16:27:26,238 INFO [org.ovirt.engine.core.vdsbroker.UpdateVdsDynamicDataVDSCommand] (pool-3-thread-50) [686128dd] START, UpdateVdsDynamicDataVDSCommand(vdsId = ebf0aae2-d4a6-11e1-8bef-0f498706821d, vdsDynamic=org.ovirt.engine.core.common.businessentities.VdsDynamic@8ce6c23d), log id: 1d991881
2012-07-25 16:27:26,249 INFO [org.ovirt.engine.core.vdsbroker.UpdateVdsDynamicDataVDSCommand] (pool-3-thread-50) [686128dd] FINISH, UpdateVdsDynamicDataVDSCommand, log id: 1d991881
2012-07-25 16:27:26,274 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-50) [686128dd] Lock Acquired to object EngineLock [exclusiveLocks= key: 4f03fc62-a71e-4560-b807-5388526f6968 value: VM
, sharedLocks= ]
2012-07-25 16:27:26,374 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand] (pool-3-thread-50) [686128dd] START, IsValidVDSCommand(storagePoolId = 3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d, ignoreFailoverLimit = false, compatabilityVersion = null), log id: 412b8a26
2012-07-25 16:27:26,379 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand] (pool-3-thread-50) [686128dd] FINISH, IsValidVDSCommand, return: true, log id: 412b8a26
2012-07-25 16:27:26,464 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (pool-3-thread-50) [686128dd] START, IsVmDuringInitiatingVDSCommand(vmId = 4f03fc62-a71e-4560-b807-5388526f6968), log id: 557baa43
2012-07-25 16:27:26,467 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (pool-3-thread-50) [686128dd] FINISH, IsVmDuringInitiatingVDSCommand, return: false, log id: 557baa43
2012-07-25 16:27:26,516 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-50) [686128dd] Running command: RunVmCommand internal: false. Entities affected : ID: 4f03fc62-a71e-4560-b807-5388526f6968 Type: VM
2012-07-25 16:27:26,636 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsoPrefixVDSCommand] (pool-3-thread-50) [686128dd] START, IsoPrefixVDSCommand(storagePoolId = 3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d, ignoreFailoverLimit = false, compatabilityVersion = null), log id: 4343f447
2012-07-25 16:27:26,639 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsoPrefixVDSCommand] (pool-3-thread-50) [686128dd] FINISH, IsoPrefixVDSCommand, return: /rhev/data-center/3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d/bb0c61bf-18d1-41da-8e92-b3da6e6abffb/images/11111111-1111-1111-1111-111111111111, log id: 4343f447
2012-07-25 16:27:26,643 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-3-thread-50) [686128dd] START, CreateVmVDSCommand(vdsId = 07d47b32-d4aa-11e1-b06e-b3ff4a3f9e20, vmId=4f03fc62-a71e-4560-b807-5388526f6968, vm=org.ovirt.engine.core.common.businessentities.VM@10bca4bb), log id: 225a83d1
2012-07-25 16:27:26,652 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (pool-3-thread-50) [686128dd] START, CreateVDSCommand(vdsId = 07d47b32-d4aa-11e1-b06e-b3ff4a3f9e20, vmId=4f03fc62-a71e-4560-b807-5388526f6968, vm=org.ovirt.engine.core.common.businessentities.VM@10bca4bb), log id: 78491589
2012-07-25 16:27:26,735 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (pool-3-thread-50) [686128dd] org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand kvmEnable=true,nicModel=pv,pv,keyboardLayout=en-us,nice=0,timeOffset=-2,transparentHugePages=true,vmId=4f03fc62-a71e-4560-b807-5388526f6968,drives=[Ljava.util.Map;@3d83b1e9,acpiEnable=true,custom={},spiceSslCipherSuite=DEFAULT,memSize=4096,boot=cd,smp=2,vmType=kvm,emulatedMachine=pc-0.14,display=vnc,tabletEnable=true,spiceSecureChannels=smain,sinputs,smpCoresPerSocket=1,spiceMonitors=1,cdrom=/rhev/data-center/3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d/bb0c61bf-18d1-41da-8e92-b3da6e6abffb/images/11111111-1111-1111-1111-111111111111/CentOS-6.2-x86_64-LiveDVD.iso,macAddr=00:1a:4a:1e:01:10,00:1a:4a:1e:01:11,bridge=network_10,ovirtmgmt,vmName=Git-Server,cpuType=Conroe
2012-07-25 16:27:26,745 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (pool-3-thread-50) [686128dd] FINISH, CreateVDSCommand, log id: 78491589
2012-07-25 16:27:26,750 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-3-thread-50) [686128dd] IncreasePendingVms::CreateVmIncreasing vds ovirt-node-sun-4.local pending vcpu count, now 2. Vm: Git-Server
2012-07-25 16:27:26,780 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-3-thread-50) [686128dd] FINISH, CreateVmVDSCommand, return: WaitForLaunch, log id: 225a83d1
2012-07-25 16:27:26,804 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-50) [686128dd] Lock freed to object EngineLock [exclusiveLocks= key: 4f03fc62-a71e-4560-b807-5388526f6968 value: VM
, sharedLocks= ]
2012-07-25 16:27:28,023 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (QuartzScheduler_Worker-6) [5be91432] START, DestroyVDSCommand(vdsId = 07d47b32-d4aa-11e1-b06e-b3ff4a3f9e20, vmId=4f03fc62-a71e-4560-b807-5388526f6968, force=false, secondsToWait=0, gracefully=false), log id: 4b8dcf4e
2012-07-25 16:27:28,108 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (QuartzScheduler_Worker-6) [5be91432] FINISH, DestroyVDSCommand, log id: 4b8dcf4e
2012-07-25 16:27:28,147 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-6) [5be91432] Running on vds during rerun failed vm: null
2012-07-25 16:27:28,151 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-6) [5be91432] vm Git-Server running in db and not running in vds - add to rerun treatment. vds ovirt-node-sun-4.local
2012-07-25 16:27:28,174 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-6) [5be91432] Rerun vm 4f03fc62-a71e-4560-b807-5388526f6968. Called from vds ovirt-node-sun-4.local
2012-07-25 16:27:28,180 INFO [org.ovirt.engine.core.vdsbroker.UpdateVdsDynamicDataVDSCommand] (pool-3-thread-43) [5be91432] START, UpdateVdsDynamicDataVDSCommand(vdsId = 07d47b32-d4aa-11e1-b06e-b3ff4a3f9e20, vdsDynamic=org.ovirt.engine.core.common.businessentities.VdsDynamic@54ec3b0a), log id: 60cb5c98
2012-07-25 16:27:28,191 INFO [org.ovirt.engine.core.vdsbroker.UpdateVdsDynamicDataVDSCommand] (pool-3-thread-43) [5be91432] FINISH, UpdateVdsDynamicDataVDSCommand, log id: 60cb5c98
2012-07-25 16:27:28,216 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-43) [5be91432] Lock Acquired to object EngineLock [exclusiveLocks= key: 4f03fc62-a71e-4560-b807-5388526f6968 value: VM
, sharedLocks= ]
2012-07-25 16:27:28,301 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand] (pool-3-thread-43) [5be91432] START, IsValidVDSCommand(storagePoolId = 3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d, ignoreFailoverLimit = false, compatabilityVersion = null), log id: 78370bf8
2012-07-25 16:27:28,306 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand] (pool-3-thread-43) [5be91432] FINISH, IsValidVDSCommand, return: true, log id: 78370bf8
2012-07-25 16:27:28,383 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (pool-3-thread-43) [5be91432] START, IsVmDuringInitiatingVDSCommand(vmId = 4f03fc62-a71e-4560-b807-5388526f6968), log id: 289dae44
2012-07-25 16:27:28,386 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (pool-3-thread-43) [5be91432] FINISH, IsVmDuringInitiatingVDSCommand, return: false, log id: 289dae44
2012-07-25 16:27:28,416 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-43) [5be91432] Running command: RunVmCommand internal: false. Entities affected : ID: 4f03fc62-a71e-4560-b807-5388526f6968 Type: VM
2012-07-25 16:27:28,542 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsoPrefixVDSCommand] (pool-3-thread-43) [5be91432] START, IsoPrefixVDSCommand(storagePoolId = 3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d, ignoreFailoverLimit = false, compatabilityVersion = null), log id: 15fd0eb1
2012-07-25 16:27:28,545 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsoPrefixVDSCommand] (pool-3-thread-43) [5be91432] FINISH, IsoPrefixVDSCommand, return: /rhev/data-center/3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d/bb0c61bf-18d1-41da-8e92-b3da6e6abffb/images/11111111-1111-1111-1111-111111111111, log id: 15fd0eb1
2012-07-25 16:27:28,548 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-3-thread-43) [5be91432] START, CreateVmVDSCommand(vdsId = cbebdd0a-d4a3-11e1-a014-ef58dce093d8, vmId=4f03fc62-a71e-4560-b807-5388526f6968, vm=org.ovirt.engine.core.common.businessentities.VM@1e76519d), log id: 18cf91be
2012-07-25 16:27:28,557 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (pool-3-thread-43) [5be91432] START, CreateVDSCommand(vdsId = cbebdd0a-d4a3-11e1-a014-ef58dce093d8, vmId=4f03fc62-a71e-4560-b807-5388526f6968, vm=org.ovirt.engine.core.common.businessentities.VM@1e76519d), log id: 7b9e926c
2012-07-25 16:27:28,646 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (pool-3-thread-43) [5be91432] org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand kvmEnable=true,nicModel=pv,pv,keyboardLayout=en-us,nice=0,timeOffset=-2,transparentHugePages=true,vmId=4f03fc62-a71e-4560-b807-5388526f6968,drives=[Ljava.util.Map;@1db78df0,acpiEnable=true,custom={},spiceSslCipherSuite=DEFAULT,memSize=4096,boot=cd,smp=2,vmType=kvm,emulatedMachine=pc-0.14,display=vnc,tabletEnable=true,spiceSecureChannels=smain,sinputs,smpCoresPerSocket=1,spiceMonitors=1,cdrom=/rhev/data-center/3bdc6f14-bb92-4b0e-8db2-d0ba4c34f61d/bb0c61bf-18d1-41da-8e92-b3da6e6abffb/images/11111111-1111-1111-1111-111111111111/CentOS-6.2-x86_64-LiveDVD.iso,macAddr=00:1a:4a:1e:01:10,00:1a:4a:1e:01:11,bridge=network_10,ovirtmgmt,vmName=Git-Server,cpuType=Conroe
2012-07-25 16:27:28,655 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand] (pool-3-thread-43) [5be91432] FINISH, CreateVDSCommand, log id: 7b9e926c
2012-07-25 16:27:28,661 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-3-thread-43) [5be91432] IncreasePendingVms::CreateVmIncreasing vds ovirt-node-sun-1.local pending vcpu count, now 2. Vm: Git-Server
2012-07-25 16:27:28,683 INFO [org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (pool-3-thread-43) [5be91432] FINISH, CreateVmVDSCommand, return: WaitForLaunch, log id: 18cf91be
2012-07-25 16:27:28,691 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-43) [5be91432] Lock freed to object EngineLock [exclusiveLocks= key: 4f03fc62-a71e-4560-b807-5388526f6968 value: VM
, sharedLocks= ]
2012-07-25 16:27:29,550 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (QuartzScheduler_Worker-54) START, DestroyVDSCommand(vdsId = cbebdd0a-d4a3-11e1-a014-ef58dce093d8, vmId=4f03fc62-a71e-4560-b807-5388526f6968, force=false, secondsToWait=0, gracefully=false), log id: 2b6ad571
2012-07-25 16:27:29,644 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (QuartzScheduler_Worker-54) FINISH, DestroyVDSCommand, log id: 2b6ad571
2012-07-25 16:27:29,713 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-54) Running on vds during rerun failed vm: null
2012-07-25 16:27:29,716 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-54) vm Git-Server running in db and not running in vds - add to rerun treatment. vds ovirt-node-sun-1.local
2012-07-25 16:27:29,741 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-54) Rerun vm 4f03fc62-a71e-4560-b807-5388526f6968. Called from vds ovirt-node-sun-1.local
2012-07-25 16:27:29,747 INFO [org.ovirt.engine.core.vdsbroker.UpdateVdsDynamicDataVDSCommand] (pool-3-thread-43) START, UpdateVdsDynamicDataVDSCommand(vdsId = cbebdd0a-d4a3-11e1-a014-ef58dce093d8, vdsDynamic=org.ovirt.engine.core.common.businessentities.VdsDynamic@53255766), log id: 6a9130c4
2012-07-25 16:27:29,758 INFO [org.ovirt.engine.core.vdsbroker.UpdateVdsDynamicDataVDSCommand] (pool-3-thread-43) FINISH, UpdateVdsDynamicDataVDSCommand, log id: 6a9130c4
my Environment:
engine:
ovirt-engine-sdk-3.1.0.2-gita89f4e.fc17.noarch
ovirt-engine-cli-3.1.0.6-1.fc17.noarch
ovirt-engine-tools-common-3.1.0-0.2.20120704git1df1ba.fc17.noarch
ovirt-engine-genericapi-3.1.0-0.2.20120704git1df1ba.fc17.noarch
ovirt-engine-notification-service-3.1.0-0.2.20120704git1df1ba.fc17.noarch
ovirt-engine-restapi-3.1.0-0.2.20120704git1df1ba.fc17.noarch
ovirt-engine-dbscripts-3.1.0-0.2.20120704git1df1ba.fc17.noarch
ovirt-engine-userportal-3.1.0-0.2.20120704git1df1ba.fc17.noarch
ovirt-engine-3.1.0-0.2.20120704git1df1ba.fc17.noarch
ovirt-engine-setup-3.1.0-1.fc17.noarch
ovirt-engine-webadmin-portal-3.1.0-0.2.20120704git1df1ba.fc17.noarch
ovirt-engine-config-3.1.0-0.2.20120704git1df1ba.fc17.noarch
ovirt-engine-backend-3.1.0-0.2.20120704git1df1ba.fc17.noarch
node:
oVirt Node Hypervisor 2.2.2-2.2.fc16
12 years, 4 months
[Users] How to force VM's to run on different hosts?
by Maxim Burgerhout
Hi,
Can someone tell me whether setting positive and negative VM affinity rules
will be at all possible with oVirt at some point in time, i.e. is this on
the roadmap?
I need to be able to tell VM's to run on different hosts, spread them
around, so to speak. For example, domain controllers would be better off
running on as many different hypervisors as possible, the way I see it.
That way, the failure of a single hypervisor has minimal impact on the
infrastructure. I know there is a feature to pin VM's to a single
hypervisor, but that's not quite the same. I would like to group the domain
controllers and then tell them not to run on the same host as other members
of that group as much as possible.
The other way around would be nice as well: have several VM's run on the
same hardware. For example, a three tiered web application would probably
perform better if the VM's are all on the same hypervisor. I know I could
pin them all to the same hypervisor, but still: that's not quite the same.
I want to be able to group the web app VM's and tell them to try to run on
the same hypervisors as the other members of the group, so they can move to
another hypervisor as a group if the need arises.
Apologies if this has been asked before or documented in some place I
haven't looked yet.
Regards,
Maxim Burgerhout <maxim(a)wzzrd.com>
12 years, 4 months
[Users] Add user error.
by victor nunes
I'm trying to create a User, going in the Users tab and then clicking add,
however, no field appears to me to fill out, just the option to search
user.
This is some error oVirt?
Att,
Victor
--
“Encarada do ponto de vista da juventude, a vida parece um futuro
indefinidamente longo, ao passo que, na velhice, ela parece um passado
deveras curto. Assim, a vida no seu início se apresenta do mesmo modo
que as coisas quando as olhamos através de um binóculo usado ao contrário;
mas, ao
seu final, ela se parece com as coisas tal qual são vistas quando o
binóculo
é usado de modo normal. Um homem precisa ter envelhecido e vivido
bastante para perceber como a vida é curta”.
(Poema de Arthur Schopenhauer)
12 years, 4 months
[Users] F17 vdsm bootstrap_complete trouble
by Ryan Harper
I'm having trouble getting a F17 system[1] added to engine[2]. The symtoms
are in the engine UI, it says the install falls. I'm using the latest
rpms[3]
On the end-point, the bootstrap log shows success.
However, when I attempt to test the vdsm install with:
vdsClient -s 0 getVdsCaps
I get a nice ssl error:
[root@hungerforce tmp]# vdsClient -s 0 getVdsCaps
Traceback (most recent call last):
File "/usr/share/vdsm/vdsClient.py", line 2275, in <module>
code, message = commands[command][0](commandArgs)
File "/usr/share/vdsm/vdsClient.py", line 403, in do_getCap
return self.ExecAndExit(self.s.getVdsCapabilities())
File "/usr/lib64/python2.7/xmlrpclib.py", line 1224, in __call__
return self.__send(self.__name, args)
File "/usr/lib64/python2.7/xmlrpclib.py", line 1578, in __request
verbose=self.__verbose
File "/usr/lib64/python2.7/xmlrpclib.py", line 1264, in request
return self.single_request(host, handler, request_body, verbose)
File "/usr/lib64/python2.7/xmlrpclib.py", line 1292, in single_request
self.send_content(h, request_body)
File "/usr/lib64/python2.7/xmlrpclib.py", line 1439, in send_content
connection.endheaders(request_body)
File "/usr/lib64/python2.7/httplib.py", line 954, in endheaders
self._send_output(message_body)
File "/usr/lib64/python2.7/httplib.py", line 814, in _send_output
self.send(msg)
File "/usr/lib64/python2.7/httplib.py", line 776, in send
self.connect()
File "/usr/lib/python2.7/site-packages/vdsm/SecureXMLRPCServer.py", line 98, in connect
cert_reqs=self.cert_reqs)
File "/usr/lib64/python2.7/ssl.py", line 381, in wrap_socket
ciphers=ciphers)
File "/usr/lib64/python2.7/ssl.py", line 141, in __init__
ciphers)
SSLError: [Errno 185090050] _ssl.c:340: error:0B084002:x509 certificate routines:X509_load_cert_crl_file:system lib
This problem is because not all of the ssl certs for vdsm are present.
On a working host:
[root@ichigo-dom226 tmp]# find /etc/pki/vdsm -type f
/etc/pki/vdsm/certs/cacert.pem
/etc/pki/vdsm/certs/vdsmcert.pem
/etc/pki/vdsm/keys/libvirt_password
/etc/pki/vdsm/keys/dh.pem
/etc/pki/vdsm/keys/vdsmkey.pem
On the host with the error:
[root@hungerforce tmp]# find /etc/pki/vdsm -type f
/etc/pki/vdsm/keys/dh.pem
/etc/pki/vdsm/keys/libvirt_password
/etc/pki/vdsm/keys/vdsmkey.pem
As it turns out:
/etc/pki/vdsm/certs/cacert.pem
/etc/pki/vdsm/certs/vdsmcert.pem
These files are generated from:
/usr/libexec/vdsm/vdsm-gencerts.sh
which is invoked by: deployUtils.instCert()
which is called by: vds_bootstrap_complete.py
So... the question is: why isn't vds_bootstrap_complete.py getting
invoked?
Also, if I re-run the vdsm-gencerts.sh and validate my certificates I
can get vdsm to work properly on the host (vdsClient -s works)... then
if I go to engine and attempt to Activate, it just say the host is
non-responsive... re-installing re-breaks vdsm since it doesn't generate
the SSL certs.
1. [root@hungerforce tmp]# rpm -qa | egrep "(vdsm|libvirt)"
vdsm-4.10.0-5.fc17.x86_64
vdsm-python-4.10.0-5.fc17.x86_64
libvirt-daemon-config-nwfilter-0.9.11.4-3.fc17.x86_64
libvirt-daemon-0.9.11.4-3.fc17.x86_64
libvirt-lock-sanlock-0.9.11.4-3.fc17.x86_64
vdsm-xmlrpc-4.10.0-5.fc17.noarch
vdsm-cli-4.10.0-5.fc17.noarch
libvirt-0.9.11.4-3.fc17.x86_64
libvirt-daemon-config-network-0.9.11.4-3.fc17.x86_64
libvirt-client-0.9.11.4-3.fc17.x86_64
libvirt-python-0.9.11.4-3.fc17.x86_64
2. [root@bebop ~]# rpm -qa | egrep "(ovirt-engine|vdsm)"
ovirt-engine-dbscripts-3.1.0-1.fc17.noarch
ovirt-engine-userportal-3.1.0-1.fc17.noarch
ovirt-engine-genericapi-3.1.0-1.fc17.noarch
ovirt-engine-cli-3.1.0.6-1.fc17.noarch
ovirt-engine-backend-3.1.0-1.fc17.noarch
ovirt-engine-notification-service-3.1.0-1.fc17.noarch
ovirt-engine-3.1.0-1.fc17.noarch
vdsm-bootstrap-4.10.0-5.fc17.noarch
ovirt-engine-webadmin-portal-3.1.0-1.fc17.noarch
ovirt-engine-restapi-3.1.0-1.fc17.noarch
ovirt-engine-config-3.1.0-1.fc17.noarch
ovirt-engine-sdk-3.1.0.4-1.fc17.noarch
ovirt-engine-tools-common-3.1.0-1.fc17.noarch
ovirt-engine-setup-3.1.0-1.fc17.noarch
3. http://ovirt.org/releases/3.1/rpm/Fedora/17/
--
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
ryanh(a)us.ibm.com
12 years, 4 months
[Users] Fwd: error ISO domain
by victor nunes
---------- Forwarded message ----------
From: victor nunes <victor.rebli(a)gmail.com>
Date: 2012/7/31
Subject: Re: [Users] error ISO domain
To: Itamar Heim <iheim(a)redhat.com>
I'm sorry I went to see that there was the option to activate later. I
enabled it and it worked.
2012/7/29 Itamar Heim <iheim(a)redhat.com>
> On 07/29/2012 11:32 PM, victor nunes wrote:
>
>> Inactive.
>>
>
> what happens when you activate it (under DC --> storage sub tab)?
>
>
>> 2012/7/29 Itamar Heim <iheim(a)redhat.com <mailto:iheim@redhat.com>>
>>
>>
>> On 07/29/2012 07:50 AM, victor nunes wrote:
>>
>> Hello, I'm having the following error after trying to insert an
>> ISO
>> storage domain.
>>
>> Failed to refresh the following Iso domains : ISO1 (Floppy file
>> type).
>> Please check domain activity
>> Failed to refresh the following Iso domains : ISO1 (ISO file
>> type).
>> Please check domain activity.
>>
>> What log files can I search a clue to try to solve it?
>>
>>
>> ovirt engine log and the vdsm log on the SPM host (or the single
>> host you have).
>> what is the status of the iso domain in the relevant data center?
>>
>>
>> Att,
>>
>>
>> Victor
>>
>> --
>> “Encarada do ponto de vista da juventude, a vida parece um futuro
>> indefinidamente longo, ao passo que, na velhice, ela parece um
>> passado
>> deveras curto. Assim, a vida no seu início se apresenta do mesmo
>> modo
>> que as coisas quando as olhamos através de um binóculo usado ao
>> contrário; mas, ao
>> seu final, ela se parece com as coisas tal qual são vistas
>> quando o
>> binóculo
>> é usado de modo normal. Um homem precisa ter envelhecido e vivido
>> bastante para perceber como a vida é curta”.
>>
>> (Poema de Arthur Schopenhauer)
>>
>>
>> ______________________________**___________________
>> Users mailing list
>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>> http://lists.ovirt.org/__**mailman/listinfo/users<http://lists.ovirt.org/__mailman/listinfo/users>
>>
>> <http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users>
>> >
>>
>>
>>
>>
>>
>>
>> --
>> “Encarada do ponto de vista da juventude, a vida parece um futuro
>> indefinidamente longo, ao passo que, na velhice, ela parece um passado
>> deveras curto. Assim, a vida no seu início se apresenta do mesmo modo
>> que as coisas quando as olhamos através de um binóculo usado ao
>> contrário; mas, ao
>> seu final, ela se parece com as coisas tal qual são vistas quando o
>> binóculo
>> é usado de modo normal. Um homem precisa ter envelhecido e vivido
>> bastante para perceber como a vida é curta”.
>>
>> (Poema de Arthur Schopenhauer)
>>
>
>
>
--
“Encarada do ponto de vista da juventude, a vida parece um futuro
indefinidamente longo, ao passo que, na velhice, ela parece um passado
deveras curto. Assim, a vida no seu início se apresenta do mesmo modo
que as coisas quando as olhamos através de um binóculo usado ao contrário;
mas, ao
seu final, ela se parece com as coisas tal qual são vistas quando o
binóculo
é usado de modo normal. Um homem precisa ter envelhecido e vivido
bastante para perceber como a vida é curta”.
(Poema de Arthur Schopenhauer)
--
“Encarada do ponto de vista da juventude, a vida parece um futuro
indefinidamente longo, ao passo que, na velhice, ela parece um passado
deveras curto. Assim, a vida no seu início se apresenta do mesmo modo
que as coisas quando as olhamos através de um binóculo usado ao contrário;
mas, ao
seu final, ela se parece com as coisas tal qual são vistas quando o
binóculo
é usado de modo normal. Um homem precisa ter envelhecido e vivido
bastante para perceber como a vida é curta”.
(Poema de Arthur Schopenhauer)
12 years, 4 months
[Users] Host installation failed with error "Unable to set host time"
by Daniel Yeung
--_000_1A227AB7CE832943A98BD4C4E197832D071840TCSEXCH1tcsseccom_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I created a new host and the installation failed with the following message=
s on the engine.log:
<BSTRAP component=3D'SetSSHAccess' status=3D'OK' message=3D'SUCCESS'/>
<BSTRAP component=3D'SET_SYSTEM_TIME' status=3D'FAIL' message=3D'Unable to =
set host time.'/>
<BSTRAP component=3D'RHEV_INSTALL' status=3D'FAIL'/>
. Error occured. (Stage: Running first installation script on Host)
2012-07-31 15:28:06,530 INFO [org.ovirt.engine.core.utils.hostinstall.Mina=
InstallWrapper] (pool-5-thread-4) RunSSHCommand returns true
2012-07-31 15:28:06,530 INFO [org.ovirt.engine.core.bll.VdsInstaller] (poo=
l-5-thread-4) RunScript ended:true
2012-07-31 15:28:06,530 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (poo=
l-5-thread-4) Installation of 192.168.4.125. Operation failure. (Stage: Run=
ning first installation script on Host)
2012-07-31 15:28:06,531 INFO [org.ovirt.engine.core.bll.InstallVdsCommand]=
(pool-5-thread-4) After Installation pool-5-thread-4
2012-07-31 15:28:06,532 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatus=
VDSCommand] (pool-5-thread-4) START, SetVdsStatusVDSCommand(vdsId =3D 1001e=
89e-db3f-11e1-99f0-bbd8c818bb29, status=3DInstallFailed, nonOperationalReas=
on=3DNONE), log id: 3b08378
2012-07-31 15:28:06,544 INFO [org.ovirt.engine.core.vdsbroker.SetVdsStatus=
VDSCommand] (pool-5-thread-4) FINISH, SetVdsStatusVDSCommand, log id: 3b083=
78
Here are the vdsm related rpms in my Fedora 16 system.
vdsm-4.9.3.3-0.fc16.x86_64
vdsm-bootstrap-4.9.3.3-0.fc16.noarch
vdsm-cli-4.9.3.3-0.fc16.noarch
Does anyone encounter the same problem? Any hints?
Thank you.
DY
--_000_1A227AB7CE832943A98BD4C4E197832D071840TCSEXCH1tcsseccom_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html dir=3D"ltr">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-=
1">
<style id=3D"owaParaStyle" type=3D"text/css">P {margin-top:0;margin-bottom:=
0;}</style>
</head>
<body ocsi=3D"0" fpstyle=3D"1">
<div style=3D"direction: ltr;font-family: Tahoma;color: #000000;font-size: =
10pt;">I created a new host and the installation failed with the following =
messages on the engine.log:<br>
<br>
<BSTRAP component=3D'SetSSHAccess' status=3D'OK' message=3D'SUCCESS'/>=
;<br>
<BSTRAP component=3D'SET_SYSTEM_TIME' status=3D'FAIL' message=3D'Unable =
to set host time.'/><br>
<BSTRAP component=3D'RHEV_INSTALL' status=3D'FAIL'/><br>
. Error occured. (Stage: Running first installation script on Host)<br>
2012-07-31 15:28:06,530 INFO [org.ovirt.engine.core.utils.hostinstall=
.MinaInstallWrapper] (pool-5-thread-4) RunSSHCommand returns true<br>
2012-07-31 15:28:06,530 INFO [org.ovirt.engine.core.bll.VdsInstaller]=
(pool-5-thread-4) RunScript ended:true<br>
2012-07-31 15:28:06,530 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (poo=
l-5-thread-4) Installation of 192.168.4.125. Operation failure. (Stage: Run=
ning first installation script on Host)<br>
2012-07-31 15:28:06,531 INFO [org.ovirt.engine.core.bll.InstallVdsCom=
mand] (pool-5-thread-4) After Installation pool-5-thread-4<br>
2012-07-31 15:28:06,532 INFO [org.ovirt.engine.core.vdsbroker.SetVdsS=
tatusVDSCommand] (pool-5-thread-4) START, SetVdsStatusVDSCommand(vdsId =3D =
1001e89e-db3f-11e1-99f0-bbd8c818bb29, status=3DInstallFailed, nonOperationa=
lReason=3DNONE), log id: 3b08378<br>
2012-07-31 15:28:06,544 INFO [org.ovirt.engine.core.vdsbroker.SetVdsS=
tatusVDSCommand] (pool-5-thread-4) FINISH, SetVdsStatusVDSCommand, log id: =
3b08378<br>
<br>
<br>
Here are the vdsm related rpms in my Fedora 16 system.<br>
<br>
vdsm-4.9.3.3-0.fc16.x86_64<br>
vdsm-bootstrap-4.9.3.3-0.fc16.noarch<br>
vdsm-cli-4.9.3.3-0.fc16.noarch<br>
<br>
Does anyone encounter the same problem? Any hints? <br>
<br>
Thank you.<br>
<br>
DY<br>
</div>
</body>
</html>
--_000_1A227AB7CE832943A98BD4C4E197832D071840TCSEXCH1tcsseccom_--
12 years, 4 months
[Users] Call for Agenda Items -- oVirt Weekly Meeting 2012-08-01
by Mike Burns
Meeting Time and Place
oVirt Weekly Sync
* Wednesdays @ 15:00 UTC (may change during DST changes) - always
at 7:00am US Pacific, 10:00am US Eastern.
* To see in your timezone date -d 'WEDNESDAY 1000 EDT'
* On IRC: #ovirt on irc.oftc.net
This is the agenda for the 2012-08-01 meeting:
* Status of Next Release
* Sub-project reports (engine, vdsm, node, infra)
* Upcoming workshops
If you have other topics, please reply to me and I will add them to the
agenda. If you propose a topic, please be prepared to lead the
discussion during the meeting.
Thanks
Mike
12 years, 4 months
Re: [Users] Can't add a host to a 2.2 compatibilty level cluster
by Nicholas Kesick
--_4115f533-a1da-4990-ae7f-da34fbe142ad_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
> Date: Tue=2C 31 Jul 2012 09:07:07 +0300
> From: iheim(a)redhat.com
> To: cybertimber2000(a)hotmail.com
> CC: users(a)ovirt.org
> Subject: Re: [Users] Can't add a host to a 2.2 compatibilty level cluster
>=20
> On 07/31/2012 03:11 AM=2C Nicholas Kesick wrote:
> > I am unable to add a host to a 2.2 compatibilty level cluster. I'm
> > trying to add a host to that because it is a Pentium D system (which
> > supports virtualization and 64-bit)=2C and NetBurst is only available i=
n
> > 2.2 w/o a database edit.
> > Webadmin events shows "Host oVirtNode22 is compatible with versions
> > (3.0=2C3.1) and cannot join Cluster Legacy22 which is set to version 2.=
2."
> >
> > I don't see an area to set host compatibility level=2C so any suggestio=
ns?
> > When I try to add it to a 3.0/3.1 cluster=2C it reports missing cpu fla=
gs:
> > model_Conroe
>=20
> there is no ovirt 2.2 version node/vdsm.
> 2.2 is a legacy of a previous version of rhev=2C and expected to be remov=
e.
> if you want to use an older host=2C i suggest you change the db to allow =
it.
=20
Ahh I didn't think about it that way (node compatibility). It makes sense n=
ow. I'll try working on the DB edit again (or getting newer computers).
Thanks Itamar=2C
=20
- Nick
>=20
> >
> > Thanks=2C
> > - Nick
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>=20
>=20
=
--_4115f533-a1da-4990-ae7f-da34fbe142ad_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 10pt=3B
font-family:Tahoma
}
--></style></head>
<body class=3D'hmmessage'><div dir=3D'ltr'>
<style><!--
.ExternalClass .ecxhmmessage P
{padding:0px=3B}
.ExternalClass body.ecxhmmessage
{font-size:10pt=3Bfont-family:Tahoma=3B}
--></style>>=3B Date: Tue=2C 31 Jul 2012 09:07:07 +0300<br>>=3B From: i=
heim(a)redhat.com<br>>=3B To: cybertimber2000(a)hotmail.com<br>>=3B CC: use=
rs(a)ovirt.org<br>>=3B Subject: Re: [Users] Can't add a host to a 2.2 compa=
tibilty level cluster<br>>=3B <br>>=3B On 07/31/2012 03:11 AM=2C Nichol=
as Kesick wrote:<br>>=3B >=3B I am unable to add a host to a 2.2 compat=
ibilty level cluster. I'm<br>>=3B >=3B trying to add a host to that bec=
ause it is a Pentium D system (which<br>>=3B >=3B supports virtualizati=
on and 64-bit)=2C and NetBurst is only available in<br>>=3B >=3B 2.2 w/=
o a database edit.<br>>=3B >=3B Webadmin events shows "Host oVirtNode22=
is compatible with versions<br>>=3B >=3B (3.0=2C3.1) and cannot join C=
luster Legacy22 which is set to version 2.2."<br>>=3B >=3B<br>>=3B &g=
t=3B I don't see an area to set host compatibility level=2C so any suggesti=
ons?<br>>=3B >=3B When I try to add it to a 3.0/3.1 cluster=2C it repor=
ts missing cpu flags:<br>>=3B >=3B model_Conroe<br>>=3B <br>>=3B th=
ere is no ovirt 2.2 version node/vdsm.<br>>=3B 2.2 is a legacy of a previ=
ous version of rhev=2C and expected to be remove.<br>>=3B if you want to =
use an older host=2C i suggest you change the db to allow it.<br> =3B<b=
r>Ahh I didn't think about it that way (node compatibility). It makes sense=
now. I'll try working on the DB edit again =3B(or getting newer comput=
ers).<br>Thanks Itamar=2C<br> =3B<br>- Nick<br>>=3B <br>>=3B >=3B=
<br>>=3B >=3B Thanks=2C<br>>=3B >=3B - Nick<br>>=3B >=3B<br>>=
=3B >=3B<br>>=3B >=3B _______________________________________________=
<br>>=3B >=3B Users mailing list<br>>=3B >=3B Users(a)ovirt.org<br>&g=
t=3B >=3B http://lists.ovirt.org/mailman/listinfo/users<br>>=3B >=3B<=
br>>=3B <br>>=3B <br><br> <BR> </div></body>
</html>=
--_4115f533-a1da-4990-ae7f-da34fbe142ad_--
12 years, 4 months
