Issue with kernel 2.6.32-573.3.1.el6.x86_64?
by Michael Kleinpaste
So I patched my vhosts and updated the kernel
to 2.6.32-573.3.1.el6.x86_64. Afterwards the networking became unstable
for my vyatta firewall vm. Lots of packet loss and out of order packets
(based on my tshark at the time).
Has anybody else experienced this?
--
*Michael Kleinpaste*
Senior Systems Administrator
SharperLending, LLC.
www.SharperLending.com
Michael.Kleinpaste(a)SharperLending.com
(509) 324-1230 Fax: (509) 324-1234
9 years
oVirt 4.0 wishlist: oVirt Engine
by Giuseppe Ragusa
Hi all,
I go on with my wishlist, derived from both solitary mumblings and community talks at the the first Italian oVirt Meetup.
I offer to help in coding (work/family schedules permitting) but keep in mind that I'm a sysadmin with mainly C and bash-scripting skills (but hoping to improve my less-than-newbie Python too...)
I've sent separate wishlist messages for oVirt Node and VDSM.
oVirt Engine:
*) add Samba/CTDB/Ganesha capabilities (maybe in the GlusterFS management UI); there are related wishlist items on configuring/managing Samba/CTDB/Ganesha on oVirt Node and on VDSM
*) add the ability to manage containers (maybe initially as an exclusive cluster type but allowing it to coexist with GlusterFS); there are related wishlist items on supporting containers on the oVirt Node and on VDSM
*) add Open vSwitch direct support (not Neutron-mediated); there are related wishlist items on configuring/managing Open vSwitch on oVirt Node and on VDSM
*) add DRBD9 as a supported Storage Domain type, HC/HE too, managed from the Engine UI similarly to GlusterFS; there are related wishlist items on configuring/managing DRBD9 on oVirt Node and on VDSM
*) add support for managing/limiting GlusterFS heal/rebalance bandwidth usage in HC setup [1]; this is actually a GlusterFS wishlist item first and foremost, but I hope our use case could be considered compelling enough to "force their hand" a bit ;)
Regards,
Giuseppe
[1] bandwidth limiting seems to be supported only for geo-replication on GlusterFS side; it is my understanding that on non-HC setups the heal/rebalance traffic could be kept separate from hypervisor/client traffic (if a separate, Gluster-only, network is physically available and Gluster cluster nodes have been peer-probed on those network addresses)
9 years
Re: [ovirt-users] Strange permissions on Hosted Engine HA Agent log files
by Giuseppe Ragusa
On Fri, Nov 27, 2015, at 18:15, Simone Tiraboschi wrote:
>
>
> On Wed, Nov 25, 2015 at 11:53 PM, Giuseppe Ragusa <giuseppe.ragusa(a)hotmail.com> wrote:
>> Hi all,
>> I'm installing oVirt (3.6) in self-hosted mode, hyperconverged with GlusterFS (3.7.6).
>>
>> I'm using the oVirt snapshot generated the night between the 18th and 19th of November, 2015.
>>
>> The (single, at the moment) host and the Engine are both CentOS 7.1 fully up-to-date.
>>
>> After ovirt-hosted-engine-setup successful completion, I found the following (about 3 days after setup completed) "anomalies":
>>
>> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/agent.log
>> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/agent.log.2015-11-23
>> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/broker.log
>> 666 1 vdsm kvm - /var/log/ovirt-hosted-engine-ha/broker.log.2015-11-23
>>
>> The listing above comes from a custom security checking script that gives:
>>
>> "octal permissions" "number of links" "owner" "group" - "absolute pathname"
>>
>> Is the ominous "666" mark actually intended/necessary? ;-)
>
> Thanks for the report Giuseppe, I double checked on one of my test systems.
>
> [root@c71het20151028 ~]# ls -l /var/log/ovirt-hosted-engine-ha/*
> -rw-r--r--. 1 root root 10136 Nov 27 18:08 /var/log/ovirt-hosted-engine-ha/agent.log
> -rw-r--r--. 1 root root 1769029 Oct 29 17:20 /var/log/ovirt-hosted-engine-ha/agent.log.2015-10-28
> -rw-rw-rw-. 1 vdsm kvm 97685 Oct 29 18:21 /var/log/ovirt-hosted-engine-ha/agent.log.2015-10-29
> -rw-r--r--. 1 root root 3620102 Nov 25 12:09 /var/log/ovirt-hosted-engine-ha/agent.log.2015-11-24
> -rw-rw-rw-. 1 vdsm kvm 715086 Nov 25 17:01 /var/log/ovirt-hosted-engine-ha/agent.log.2015-11-25
> -rw-r--r--. 1 root root 13904 Nov 27 18:09 /var/log/ovirt-hosted-engine-ha/broker.log
> -rw-r--r--. 1 root root 9711872 Oct 29 17:20 /var/log/ovirt-hosted-engine-ha/broker.log.2015-10-28
> -rw-rw-rw-. 1 vdsm kvm 468475 Oct 29 18:21 /var/log/ovirt-hosted-engine-ha/broker.log.2015-10-29
> -rw-r--r--. 1 root root 14066693 Nov 25 12:09 /var/log/ovirt-hosted-engine-ha/broker.log.2015-11-24
> -rw-rw-rw-. 1 vdsm kvm 4505277 Nov 25 17:01 /var/log/ovirt-hosted-engine-ha/broker.log.2015-11-25
>
>
> So I've something 644 root:root and something at 666 vdsm:kvm depending from the rotation date (???).
> The directory is 700 vdsm:kvm so it's not really an issue but I think it's still worth to open a bug on that.
Many thanks Simone for your confirmation: bug opened
https://bugzilla.redhat.com/show_bug.cgi?id=1286568
Regards,
Giuseppe
>> Do I need to open a bugzilla notification for this?
>> Many thanks in advance for your attention.
>>
>> Regards,
>> Giuseppe
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
9 years
ovirt-engine-sdk-python too slow
by John Hunter
Hi guys,
I am using the ovirt-engine-sdk-python to communicate with the ovirt-engine,
I am ok to list the vms but the processing time is too long, like 4.5
seconds,
and this line:
from ovirtsdk.api import API
take almost 3 seconds.
This seems a little bit longer than I expected it to be, so I am asking is
there
a quicker way to communicate with the ovirt-engine?
--
Best regards
Junwang Zhao
Department of Computer Science &Technology
Peking University
Beijing, 100871, PRC
9 years
Install ovirt locally
by John Hunter
Hi all,
Here is my situation: in my office, we can not access the website out of
China,
I have to grab my PC home to install the ovirt environment, this makes me
sad.
Can I download all the packages needed by ovirt at home, store them in my
U-disk, and back to office and install the enviroment? I am worry about the
package dependency.
Does anybody who has done this or does anybody has a better solution for
this?
Any help would be appreciated :)
--
Best regards
Junwang Zhao
Department of Computer Science &Technology
Peking University
Beijing, 100871, PRC
9 years
live snapshot merging
by Koen Vanoppen
Dear Community,
Are there plans for live merging of snapshots?
I know it is supported from libvirt 1.2.10.
Kind regards,
Koen
9 years
Networking fails for VM running on Centos6.7.Works on Centos6.5
by mad Engineer
hello all i am having strange network issue with vms that are running on
centos 6.7 ovirt nodes.
I recently added one more ovirt node which is running centos6.7 and
upgraded from centos6.5 to centos6.7 on all other nodes.
All VMs running on nodes with centos6.7 as host Operating system fail to
reach network gateway,but if i reboot that same host to centos6.5 kernel
everything works fine(with out changing any network configuration).
Initially i thought it as configuration issue but its there on all nodes.if
i reboot to old kernel everything is working.
I am aware about ghost vlan0 issue in centos6.6 kernel.Not aware about any
issue in centos6.7 Also all my servers are up to date.
All physical interfaces are in access mode VLAN connected to nexus 5k
switches.
working kernel- 2.6.32-431.20.3.el6.x86_64
non working kernel- 2.6.32-573.8.1.el6.x86_64
Any idea?
9 years
Random VMs stuck in [drm] fb: depth 24,pitch 4096
by kevin parrikar
Running centos 6.7 and trying to PXE boot centos 6.5 vms but some of
them are stuck with this in boot message:
[drm] fb: depth 24,pitch 4096
screenshot of vm console:
http://snag.gy/7Bhyc.jpg
tried restarting vms but its still stuck there
rpm -qa |grep kvm
qemu-kvm-rhev-tools-0.12.1.2-2.479.el6_7.2.x86_64
qemu-kvm-rhev-0.12.1.2-2.479.el6_7.2.x86_64
rpm -qa |grep seabio
seabios-0.6.1.2-30.el6.x86_64
uname -a
2.6.32-431.el6.x86_64
ever seen this behaviour?
vms have 8gb/4cpu
9 years
3.6 vm from template with cloud-init. Not able to confirm OK button
by Gianluca Cecchi
Hello,
I have created a template based on a CentOS 7.1 VM where I installed
cloud-init.
Now I'm trying to create a VM from that template using cloud-init and
changing hostname and network parameters.
It seems that in "Initial Run" section there is something wrong because if
I press OK it doesn't happen anything but a sort of dotted square around
the ok button, but I'm not able to see what is the thing that is not ok and
correct it.....
Can I debug anywhere?
BTW: if I succeed in this preliminar test I would like to create a vm pool
from this same template where, for every started VM in the pool (stateless
is ok for them), a new hostname and a preconfigured static ip is set (I
have not and I can't set up a dhcp server on that network). Is something
configurable in vm pool with cloud init?
Thanks
Gianluca
9 years
oVirt 4.0 wishlist: oVirt Self Hosted Engine Setup
by Giuseppe Ragusa
Hi all,
I go on with my wishlist, derived from both solitary mumblings and community talks at the the first Italian oVirt Meetup.
I offer to help in coding (work/family schedules permitting) but keep in mind that I'm a sysadmin with mainly C and bash-scripting skills (but hoping to improve my less-than-newbie Python too...)
I've sent separate wishlist messages for oVirt Node, oVirt Engine and VDSM.
oVirt Self Hosted Engine Setup:
*) allow virtual hardware customizations for locally-created Engine vm, specifically: allow to add an arbitrary number of NICs (asking for MAC address and local bridge to connect to) and maybe also an arbitrary number of disks (asking for size) as these seem to be the only/most_useful items missing; maybe the prebuilt appliance image too may be inspected by setup to detect a customized one and connect any further NICs to custom local bridges (which the user should be asked for)
Regards,
Giuseppe
9 years
