vGPU
by 董青龙
Hi all,
I am testing vGPU in ovirt4.2. I have a nvidia p100 GPU installed in the host and I have installed the correct dirver. I followed this page(https://www.ovirt.org/documentation/install-guide/appe-Preparing_a_H... but I failed. In the "Host Devices tab" I got an device called "GP100GL [Tesla P100 PCIe 16GB]". I could not find any device of "mdev type". Anyone can help me? Thanks a lot!
6 years
Centos7.6
by Demeter Tibor
Dear All,
I just wondering I would like to make an upgrade from 4.2.5 to latest stable release of ovirt.
Meanwhile centos7.6 was released.
Will that compatible with the current release of ovirt?
How is safe an upgrade now?
Thanks in advance,
Regards,
Tibor
6 years
[ANN] oVirt 4.3.0 Second Alpha Release is now available for testing
by Sandro Bonazzola
The oVirt Project is pleased to announce the availability of the Second
Alpha Release of oVirt 4.3.0, as of December 6th, 2018
This is pre-release software. This pre-release should not to be used in
production.
Please take a look at our community page[1] to learn how to ask questions
and interact with developers and users.
All issues or bugs should be reported via oVirt Bugzilla[2].
This update is the second alpha release of the 4.3.0 version.
This release brings more than 80 enhancements and more than 330 bug fixes
on top of oVirt 4.2 series.
What's new in oVirt 4.3.0?
* Q35 chipset, support booting using UEFI and Secure Boot
* Skylake-server and AMD EPYC support
* New smbus driver in windows guest tools
* Improved support for v2v
* Tech preview for oVirt on Fedora 28
* Hundreds of bug fixes on top of oVirt 4.2 series
* New VM portal details page (see a preview here:
https://imgur.com/a/ExINpci)
* New Cluster upgrade UI
* OVN security groups
* IPv6 (static host addresses)
* LLDP Labeler
* Support for 3.6 and 4.0 data centers, clusters and hosts were removed
* Now using PostgreSQL 10
This release is available now on x86_64 architecture for:
* Red Hat Enterprise Linux 7.6 or later
* CentOS Linux (or similar) 7.6 or later
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures
for:
* Red Hat Enterprise Linux 7.6 or later
* CentOS Linux (or similar) 7.6 or later
* oVirt Node 4.3 (available for x86_64 only)
Experimental tech preview for x86_64 and s390x architectures for Fedora 28
is also included.
See the release notes draft [3] for installation / upgrade instructions and
a list of new features and bugs fixed.
Notes:
- oVirt Appliance is already available for both CentOS 7 and Fedora 28
(tech preview).
- oVirt Node NG is already available for both CentOS 7
- oVirt Node NG for Fedora 28 (tech preview) is facing build issues on
Jenkins and will be released as soon as possible
Additional Resources:
* Read more about the oVirt 4.3.0 release highlights:
http://www.ovirt.org/release/4.3.0/
* Get more oVirt project updates on Twitter: https://twitter.com/ovirt
* Check out the latest project news on the oVirt blog:
http://www.ovirt.org/blog/
[1] https://www.ovirt.org/community/
[2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt
[3] http://www.ovirt.org/release/4.3.0/
[4] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/
--
SANDRO BONAZZOLA
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://red.ht/sig>
6 years
Re: start vm without engine
by Michal Skrivanek
> On 6 Dec 2018, at 12:30, David David <dd432690(a)gmail.com> wrote:
>
> > > On 29 May 2018, at 16:08, David David <dd432690(a)gmail.com <mailto:dd432690@gmail.com>> wrote:
> > >
> > > hi.
> > >
> > > How to start VM directly in hypervisor? ovirt-engine was crashed.
>
> > that is not supported yet
>
> > >
> > > VM's id is known.
> > >
> > > vdsclient VM, hasn't argumets for starting vm.
>
>
> Hello again
>
> > it does, but you need to connect storage and then supply the whole VM configuration which is not simple to do.
>
> Ok. How to do this ?
>
> I have access to FC storage, where VM placed
you can use the persisted libvirt definition on host where it was running last if the host just crashed (it’s removed on clean guest shutdown though). If you have it you can connect the appropriate storage domain using vdsm-client, and then start the VM using that libvirt definition.
again, it’s not very easy to do.
In all other cases it would have to be generated by the engine again as the OVF_STORE OVF backup is an OVF and you need libvirt’s XML so you would have to convert it first anyway, so again nothing simple to do.
In disaster recovery scenrio you can just take the whole storage domain and import it into the new clean engine installation and you’ll get all the VMs
it depends what you really want to do
Thanks,
michal
>
> вт, 29 мая 2018 г. в 18:53, Michal Skrivanek <michal.skrivanek(a)redhat.com <mailto:michal.skrivanek@redhat.com>>:
>
>
> > On 29 May 2018, at 16:08, David David <dd432690(a)gmail.com <mailto:dd432690@gmail.com>> wrote:
> >
> > hi.
> >
> > How to start VM directly in hypervisor? ovirt-engine was crashed.
>
> that is not supported yet
>
> >
> > VM's id is known.
> >
> > vdsclient VM, hasn't argumets for starting vm.
>
> it does, but you need to connect storage and then supply the whole VM configuration which is not simple to do.
>
> >
> > Thanks.
> > _______________________________________________
> > Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
> > To unsubscribe send an email to users-leave(a)ovirt.org <mailto:users-leave@ovirt.org>
> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ <https://www.ovirt.org/site/privacy-policy/>
> > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ <https://www.ovirt.org/community/about/community-guidelines/>
> > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/SDTALWD2CHO... <https://lists.ovirt.org/archives/list/users@ovirt.org/message/SDTALWD2CHO...>
>
6 years
Cloud-init reset network configuration to default dhcp after reboot and regular run
by Mike Lykov
Hi All!
I'm trying to configure network in VMs created from template, and see
strange behaviour from cloud-init.
cloud-init installed and enabled in template.
ver cloud-init-0.7.9-24.el7.centos.1.x86_64
guest Centos 7.5
ovirt 4.2.7 from ovirt-releases-42-pre repo
1. I use "run once" with initial run - use cloud-init - networks
in-guest net iface : eth0
add new - static
enter address, mask, gw
ipv6 none
Run (once) and cloud-init configure ifcfg-eth0 for that address
(successfully).
2. I shutdown that VM and use "Run" (regular) without "use cloud init"
in VM properties, awaiting that above configurations are saved (and
booted with it).
But because "use cloud init" not checked, and cloud-init service
enabled, it start, cannot find datasource and drop configuration to
default (dhcp).
In cloud-init.log
2018-11-20 13:53:24,153 - util.py[WARNING]: No instance datasource
found! Likely bad things to come!
2018-11-20 13:53:24,153 - util.py[DEBUG]: No instance datasource found!
Likely bad things to come!
Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/cloudinit/cmd/main.py", line
236, in main_init
init.fetch(existing=existing)
File "/usr/lib/python2.7/site-packages/cloudinit/stages.py", line
343, in fetch
return self._get_data_source(existing=existing)
File "/usr/lib/python2.7/site-packages/cloudinit/stages.py", line
253, in _get_data_source
pkg_list, self.reporter)
File
"/usr/lib/python2.7/site-packages/cloudinit/sources/__init__.py", line
320, in find_source
raise DataSourceNotFoundException(msg)
DataSourceNotFoundException: Did not find any data source, searched
classes: (DataSourceNoCloudNet)
2018-11-20 13:53:24,194 - stages.py[DEBUG]: applying net config names
for {'version': 1, 'config': [{'subnets': [{'type': 'dhcp'}],
'type': 'physical', 'name': 'eth0', 'mac_address': '56:6f:21:4a:00:04'}]}
It reverts config as in here
https://lists.ovirt.org/archives/list/users@ovirt.org/thread/NE27UO4WNZIC...
3. then I found bug
https://bugzilla.redhat.com/show_bug.cgi?id=1439373#c5
and when "run once" I disable network config as in that comment.
Shutdown, Run (not once) and voila! Ip address are static!
2018-11-20 15:07:31,601 - handlers.py[DEBUG]: finish:
init-network/search-NoCloudNet: SUCCESS: no network data found from
DataSource NoCloudNet
.....
2018-11-20 15:07:31,602 - util.py[WARNING]: No instance datasource
found! Likely bad things to come!
2018-11-20 15:07:31,602 - util.py[DEBUG]: No instance datasource found!
Likely bad things to come!
2018-11-20 15:07:31,639 - stages.py[DEBUG]: network config disabled by
system_cfg
2018-11-20 15:07:31,639 - stages.py[INFO]: network config is disabled by
system_cfg
2018-11-20 15:07:31,639 - main.py[DEBUG]: [net] Exiting without
datasource in local mode
2018-11-20 15:07:31,640 - util.py[DEBUG]: Reading from /proc/uptime
(quiet=False)
2018-11-20 15:07:31,640 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2018-11-20 15:07:31,640 - util.py[DEBUG]: cloud-init mode 'init' took
0.287 seconds (0.29)
2018-11-20 15:07:31,640 - handlers.py[DEBUG]: finish: init-network:
SUCCESS: searching for network datasources
"cloud-init used to use a "marker" file that it created on initial
execution. If that "marker" file existed it would not rerun on reboot. "
- are it not working in ovirt/this cloud-init version ?
--
Mike
6 years
Additional routes on Interface
by Sandro Emma
Hi,
we are running a RHV 4.1 installation which is working fine except one issue:
We have a Network which is only used for fencing(power Management via ilo), each host has an interface with this network and a custom ip, for this to work we need a few custom routes.
At the moment we add the new routes via a plain route file under /etc/sysconfig/network-scripts/, but the engine flags this interface then as out-of-sync.
How can we persist those changes across reboots and still be able to add new devices via the UI ?
This looked promising but isnt working: https://ovirt.org/develop/release-management/features/network/networkrelo...
Thanks for any Help :)
6 years
Repository ovirt-4.2 is listed more than once in the configuration
by Markus Frei
Hello everybody
I am frequently receiving the following messages from ovirt:
Repository ovirt-4.2-epel is listed more than once in the configuration
Repository ovirt-4.2-centos-gluster312 is listed more than once in the configuration
Repository ovirt-4.2-virtio-win-latest is listed more than once in the configuration
Repository ovirt-4.2-centos-qemu-ev is listed more than once in the configuration
Repository ovirt-4.2-centos-opstools is listed more than once in the configuration
Repository centos-sclo-rh-release is listed more than once in the configuration
Repository ovirt-4.2-centos-ovirt42 is listed more than once in the configuration
Repository ovirt-4.2 is listed more than once in the configuration
I`ve got following repos configured in directory /etc/yum.repos.d:
ovirt-4.2-dependencies.repo
ovirt-4.2-pre-dependencies.repo
ovirt-4.2-pre.repo
ovirt-4.2.repo
I deleted the 'pre' repos several times but apparently they are being recreated somehow.
Can anybody explain this behaviour please and eventually the meaning of these 'pre' repos in generell as well?
Thank you in advance.
Kind regards,
Chris
6 years
Help - "No Default Route show in Ovirt Engine"
by aru_barani＠yahoo.com
After create data center,cluster try install the host in ovirt engine it show the error "Hosts has no Default Route" but both the Engine and Ovirt node ping. At same time try Register Ovirt Node to Ovirt engine It shows "Please provide valid oVirt engine fully qualified domain name (FQDN) and port (443 by default)" but i am use hpervisor.eipl.com with port 443
6 years
The built in group Everyone is troublesome.
by Jacob Green
So all my VMs are inheriting system permissions from group
everyone and giving all my users access to all my VMs, in ovirt 4.2. Is
there a best practices guide or any recommendation on how to clear this
up? Clicking remove on everyone does not work because Ovirt won't allow
me to remove a built in account.
Thank you
--
Jacob Green
Systems Admin
American Alloy Steel
713-300-5690
6 years
