Using a synology as an nfs storage
by Andy Michielsen
Hello,
I'm setting up a 3 node cluster with the ovirtnode iso and a seperate
server with the engine on and a synology for nfs storage.
I have done my configuration and I'm able to mount the share manually on
the node with a command. Also on the server with the engine on I can mount
it manually. But when I want to do it through the webinterface to add a
data domain it say the permissions are wrong.
Any idea's on how to figure this out ?
Kind regards.
1 year, 3 months
Re: [ovirt-devel] USB on host support?
by Nir Soffer
On Sat, Jun 29, 2019 at 11:57 PM Hetz Ben Hamo <hetz(a)hetz.biz> wrote:
> One of the requirements is USB host support (which will be on the nodes,
> not on the desktops). I haven't found any way to connect USB to a VM other
> then through SPICE, but this method won't help as these dongles won't be on
> desktops.
>
> Is this in the road map of oVirt?
>
Did you try Compute > Virtual machines > vm-name > Host devices?
Nir
1 year, 4 months
Re: USB Passtrough device problem
by Strahil
You can attach the usb to an oVirt node and check the module in use there.
Then you can try patthrough the device and check the module in use on the VM (if it's linux) or install the driver (if Windows).
Best Regards,
Strahil NikolovOn Jun 28, 2019 21:11, Juan Pablo Lorier <jplorier(a)gmail.com> wrote:
>
> thanks anyway. I'm trying to figure out how to deal with this.
>
> Regards
>
> El 26/6/19 a las 16:45, Strahil escribió:
>
> Slow motion... This sounds like bad driver or an unoptimized one.
>
> Sadly I have no more ideas how to overcome this.
>
> Best Rregards,
> Strahil Nikolov
>
> On Jun 25, 2019 20:07, jplorier(a)gmail.com wrote:
>>
>> Hi Strahil
>>
>> Sorry for the late reply but google sent ovirt mails to spam. I have tried and thought I get audio, it sounds like its played at an incorrect bitrate (I recorded audio ant soundls like slow motion audio).
>> Is there any other way to present the usb device than throught console usb emulation?
>> Regards
>>
1 year, 4 months
hosted engine not getting up
by Crazy Ayansh
Hi Team,
Today i rebooted my hosted engine and found it was not getting up. After
connecting through remote viewer i found the error "error:cannot allocate
kernel buffer" and i am not able to start hosted engine.any suggestions ?
1 year, 4 months
Ovirt Hyperconverged Cluster
by raffaele＠stefanile.com
Hi all,
I have configured a 3 nodes cluster with an Hyperconverged gluster.
I have used 2 network interface bonded with one VLAN for the mgmt and an other one for the storage.
When I use cockpit to deploy the hosted engine I receive this error.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The host has been set in non_operational status, please check engine logs, fix accordingly and re-deploy.\n"}
The ovirt version is 4.3
Someone have a similar problem?
1 year, 4 months
Proper way to upgrade hosts OS?
by Nicolas Ecarnot
Hello,
We're not using nodes but CentOS 7.x hosts.
Do you know if some documentation has been written about the proper way
to upgrade the operating system of the hosts, and especially how to
prevent breaking dependencies or cause versions flaws?
Thank you.
--
Nicolas ECARNOT
1 year, 4 months
Ovirt
by ioabdoulrahamaneapp.site＠gmail.com
Hello
Please, I need help.
it's been more than 4 times that I install ovirt-node-ng-install-4.3.4-2019061016.el7 but every time I do ifconfig, I see the message error bash command. I looked back in the sbin folder and there is no ifconfig file.
Thanks
1 year, 4 months
USB host support?
by Hetz Ben Hamo
Hi,
I'm in communication with a company that thinks about RHV.
One of the requirements is USB host support (which will be on the nodes,
not on the desktops). I haven't found any way to connect USB to a VM other
then through SPICE, but this method won't help as these dongles won't be on
desktops.
Is this in the road map of oVirt?
Thanks
1 year, 4 months
Re: Ovirt Hyperconverged Cluster
by Strahil
I think raid is OK. At least my setup has a raid0 of 2 HDDs.
In the error message there is the command that is being executed by the playbook.
Run it manually and if it fails - run again with more verbosely.
Best Regards,
Strahil NikolovOn Jun 29, 2019 01:00, Edward Berger <edwberger(a)gmail.com> wrote:
>
> Maybe there is something already on the disk from before?
> gluster setup wants it completely blank, no detectable filesystem, no raid, etc.
> see what is there with fdisk.-l see what PVs exist with pvs.
> Manually wipe, reboot and try again?
>
> On Fri, Jun 28, 2019 at 5:37 AM <raffaele(a)stefanile.com> wrote:
>>
>> I have added the lvm global filter and I have configured the multipath.conf but gdploy stay blocked on the PV creation on sda.
>> I don't have any log in /var/log/ovirt-hosted-engine-setup
>> _______________________________________________
>> Users mailing list -- users(a)ovirt.org
>> To unsubscribe send an email to users-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
>> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/SHZOZFQXM6G...
1 year, 4 months
Ovirt + Azure + AWS
by darkytoo＠gmail.com
Something i struggle with is I can't find any support for things like azure site recovery, azure backup or migrating to / from azure or AWS using oVirt, is there something i'm missing?
1 year, 4 months
