oVirt 4.4 and management network requirements
by Gianluca Cecchi
Hello,
does oVirt 4.4. support management network distributed between routed
networks and not bound to a single one?
In some environments I see situations where there are 2 different server
farms with networks not necessarily mapped to the same ranges and so it
could be useful to let oVirt hosts of the same cluster to be able to
communicate but not on the same physical network.
Eg vSphere can do it.
Thanks in advance,
Gianluca
4 years, 7 months
Re: Reconfigure Websocket Proxy
by Yedidyah Bar David
On Tue, May 26, 2020 at 3:15 PM Anton Louw via Users <users(a)ovirt.org>
wrote:
>
>
> Hi Everybody,
>
>
>
> I tried looking around, but I am stuck. I am trying to reconfigure my
> Websocket proxy in order to use noVNC. This is after the Hosted Engine name
> was changed and also after a new SSL cert was added to the Hosted Engine.
>
>
>
> Most of the articles say that I should run “engine-cleanup”, but after
> learning the hard way, I would rather not do that again 😊 Any other way
> anybody knows of? I want to completely remove it and then reinstall it.
>
Didn't test this, but you can try:
1. Keep a backup of /etc somewhere, just in case.
2. Stop ovirt-websocket-proxy.service
3. Edit /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf , remove
the line with: OVESETUP_CONFIG/websocketProxyConfig
4. Remove:
/etc/ovirt-engine/ovirt-websocket-proxy.conf.d/10-setup.conf
/etc/pki/ovirt-engine/requests/websocket-proxy.req
/etc/pki/ovirt-engine/keys/websocket-proxy.key.nopass
/etc/pki/ovirt-engine/keys/websocket-proxy.p12
/etc/pki/ovirt-engine/certs/websocket-proxy.cer
5. Run engine-setup (perhaps with '--offline', if you want to prevent it
from checking for updates)
Good luck and best regards,
>
>
> Thanks
>
> *Anton Louw*
> *Cloud Engineer: Storage and Virtualization* at *Vox*
> ------------------------------
> *T:* 087 805 0000 | *D:* 087 805 1572
> *M:* N/A
> *E:* anton.louw(a)voxtelecom.co.za
> *A:* Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
> www.vox.co.za
>
> [image: F] <https://www.facebook.com/voxtelecomZA>
> [image: T] <https://www.twitter.com/voxtelecom>
> [image: I] <https://www.instagram.com/voxtelecomza/>
> [image: L] <https://www.linkedin.com/company/voxtelecom>
> [image: Y] <https://www.youtube.com/user/VoxTelecom>
>
> [image: #VoxBrand]
> <https://www.vox.co.za/fibre/fibre-to-the-home/?prod=HOME>
> *Disclaimer*
>
> The contents of this email are confidential to the sender and the intended
> recipient. Unless the contents are clearly and entirely of a personal
> nature, they are subject to copyright in favour of the holding company of
> the Vox group of companies. Any recipient who receives this email in error
> should immediately report the error to the sender and permanently delete
> this email from all storage devices.
>
> This email has been scanned for viruses and malware, and may have been
> automatically archived by *Mimecast Ltd*, an innovator in Software as a
> Service (SaaS) for business. Providing a *safer* and *more useful* place
> for your human generated data. Specializing in; Security, archiving and
> compliance. To find out more Click Here
> <https://www.voxtelecom.co.za/security/mimecast/?prod=Enterprise>.
>
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/NXNCD2LSLV2...
>
--
Didi
4 years, 7 months
Reconfigure Websocket Proxy
by Anton Louw
Hi Everybody,
I tried looking around, but I am stuck. I am trying to reconfigure my Websocket proxy in order to use noVNC. This is after the Hosted Engine name was changed and also after a new SSL cert was added to the Hosted Engine.
Most of the articles say that I should run “engine-cleanup”, but after learning the hard way, I would rather not do that again 😊 Any other way anybody knows of? I want to completely remove it and then reinstall it.
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
______________________________________
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.louw(a)voxtelecom.co.za
www.vox.co.za
4 years, 7 months
Terraform - Ovirt - seting or get some parameters
by Michal Obeslo
Hi all, we need a help,
we have problem to set and get IP Address when we created virtual machine
when we use terraform.
step by step: what we created
1) we created virtual machine Debian 9
- installed the software ovirt-guest-agent) [systemctl status ovirt-guest
agent = OK
- we created private and public key to connectivity from another computer
by .ssh ) /Jenkins Slave/
2) we created template from virtual machine Debian 9
- set this parameter in template initial Run > user, set static IP in Ovirt
Managemet
3) downloaded project from GitHub - create virtual machine from template
- terraform main file = OK ?
- terraform init = OK
- terraform apply = OK
: yes
create new virtual machine = OK
start automatically virtual machine = OK
- when I check IP Address > IP address not set
- when I check settings in Ovirt management > network > NOT SET
- virtual machine not has IP addres > not working
- when I change settings in Ovirt management in template Debian from Static
IP dhcp > to DHCP
- when I check settings in Ovirt management > network >
IP in Ovit have DHCP, Virtual machine have dhcp OK
But wee need set static IP to Virtual machine and get this IP from
terraform.
Thank you all.
Best regard Michal
--- This is the file main.tf:
provider "ovirt" {
url = "${var.ovirt_url}"
username = "${var.ovirt_username}"
password = "${var.ovirt_password}"
}
terraform {
backend "local" {
path = "terraform.tfstate"
}
}
# Create VM call temp02
module "temp01-pipeline" {
source = "../modules/vms"
vm_authorized_ssh_key =
"${file(pathexpand("c:/cygwin64/home/Administrator/.ssh/id_rsa.pub"))}"
vm_custom_script = "
${file(pathexpand("c:/Jenkins/workspace/AT_PipelineVM/config/basic/terraform/ovirt/init_script.yml"))}"
cluster_id = "aa583cf2-a07a-11e8-aa92-525400491e5b"
vm_name = "cd-pipeline-1.0.0"
vm_memory = "4096"
vm_cpu_cores = "1"
vm_template_id = "876a260b-26c7-482e-bc19-19b10b9c48bb"
vm_hostname = "temp01.example.com"
vm_user_name = "root"
vm_dns_servers = "8.8.8.8"
vm_dns_search = "example.com"
vm_timezone = "Africa/Nairobi"
vm_nic_device = "env3"
vm_nic_ip_address = "192.168.26.36"
vm_nic_gateway = "192.168.26.2"
vm_nic_netmask = "255.255.255.0"
}
4 years, 7 months
How to change IP range of node and hosted engine without break anything ?
by Stéphane Paillet
Hello,
I installed an ovirt node and its hosted engine in a lab. After several
difficulties to install the engine (I don't know why, I didn't have any
problem in the past), I would like to change IPs of both to put them on
another vlan.
How can I do that without break anything ? My main fear is that the data
domain used by the hosted engine use the IP of the node rather than its
FQDN. I change other data domains paths, but don't find how to change
this one, 'cause I can't modify it, and I can't detach / delete it to
recreate another one. I didn't find how to move the engine on another
data domain using the node's FQDN in its path. For now, I don't use DNS,
I just updated /etc/hosts defs on both servers.
If someone could help me, telling me step by step how to change IPs on
each element in good order, I would be grateful.
Thank you.
Cheers,
Stephane
4 years, 7 months
ovirt node 4.4 and infiniband
by Giulio Casella
Hi all,
I have in production a 4.3.9 setup of ovirt, based on a standalone
engine, not HE.
I have 3 datacenters (an 3 clusters). One of these clusters is composed
of many tenth of HP blades, accessing storage via InfiniBand (used as
normal NICs, via ipoib). They're not the state of the art, but I cannot
renew the entire hardware.
After a setup of ovirt node 4.4 I cannot see ib0 nic.
I managed to see it installing CentOS 8, enabling Mellanox repo
(https://linux.mellanox.com/public/repo/mlnx_ofed/latest/rhel8.1/mellanox_...)
and installing package "mlnx-ofed-basic".
In Ovirt Node it's not possible, that package require dependencies from
CentOS 8 repos, not present in ovirt repo.
Is there any chances to have infiniband NICs working in ovirt?
TIA,
gc
4 years, 7 months
Error encountered when running ovirt-engine-rename
by Aidilf Fitri
Hello All,
I have encountered an error when trying to execute the ovirt engine rename script. Below is the error I have encountered. Any advise?
----------------Start of Error----------------------------------------------------------------------------------------------------------------------------------------------------
***L:ERROR Internal error: No module named 'urlparse'
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/otopi/main.py", line 141, in execute
self.context.loadPlugins()
File "/usr/lib/python3.6/site-packages/otopi/context.py", line 803, in loadPlugins
self._loadPluginGroups(plugindir, needgroups, loadedgroups)
File "/usr/lib/python3.6/site-packages/otopi/context.py", line 112, in _loadPluginGroups
self._loadPlugins(path, path, groupname)
File "/usr/lib/python3.6/site-packages/otopi/context.py", line 69, in _loadPlugins
self._loadPlugins(base, d, groupname)
File "/usr/lib/python3.6/site-packages/otopi/context.py", line 100, in _loadPlugins
os.path.basename(path),
File "/usr/lib/python3.6/site-packages/otopi/util.py", line 109, in loadModule
spec.loader.exec_module(module)
File "<frozen importlib._bootstrap_external>", line 678, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-rename/vmconsole_proxy_helper/__init__.py", line 15, in <module>
from . import config
File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-rename/vmconsole_proxy_helper/config.py", line 14, in <module>
import urlparse
ModuleNotFoundError: No module named 'urlparse'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/otopi/__main__.py", line 88, in main
installer.execute()
File "/usr/lib/python3.6/site-packages/otopi/main.py", line 147, in execute
sys.exc_info()[2],
File "/usr/lib/python3.6/site-packages/otopi/util.py", line 84, in raiseExceptionInformation
raise info[1].with_traceback(info[2])
File "/usr/lib/python3.6/site-packages/otopi/main.py", line 141, in execute
self.context.loadPlugins()
File "/usr/lib/python3.6/site-packages/otopi/context.py", line 803, in loadPlugins
self._loadPluginGroups(plugindir, needgroups, loadedgroups)
File "/usr/lib/python3.6/site-packages/otopi/context.py", line 112, in _loadPluginGroups
self._loadPlugins(path, path, groupname)
File "/usr/lib/python3.6/site-packages/otopi/context.py", line 69, in _loadPlugins
self._loadPlugins(base, d, groupname)
File "/usr/lib/python3.6/site-packages/otopi/context.py", line 100, in _loadPlugins
os.path.basename(path),
File "/usr/lib/python3.6/site-packages/otopi/util.py", line 109, in loadModule
spec.loader.exec_module(module)
File "<frozen importlib._bootstrap_external>", line 678, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-rename/vmconsole_proxy_helper/__init__.py", line 15, in <module>
from . import config
File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-rename/vmconsole_proxy_helper/config.py", line 14, in <module>
import urlparse
otopi.main.PluginLoadException: No module named 'urlparse'
----------------End of Error----------------------------------------------------------------------------------------------------------------------------------------------------
4 years, 7 months
where is ovirt-iso-uploader in 4.4?
by dan.creed＠thecreeds.net
Can't seem to find this, maybe I'm old school but in 4.4 how do I upload ISO's I want to boot as CD's on my virtual machine?
4 years, 7 months
