Installing on iSCSI boot node
by rtartar＠gmail.com
I've installed the oVirt node on iSCSI boot server (Cisco UCS chassis) But when I go to add to the manager it fails and the Node loses contact with it's ibft interface. Anyway I can leave the interface alone when adding to the manager? I have 5 physical interfaces attached to the node. Any help would be greatly appreciated. Using the node 4.5 installer. I add the ip=ibft to the installation startup and seems to work mostly...
Thanks in advance
3 months, 2 weeks
Error during hosted-engine deploy for Cluster Compatibility Version
by devis＠gmx.com
Hi,
I followed guide to install the oVirt Engine. I also used the suggestion to use oVirt master snapshot repositories.
But during the installation I obtain the following error:
"The host has been set in non_operational status, deployment errors: code 154: Host ********* is compatible with versions (4.2,4.3,4.4,4.5,4.6,4.7) and cannot join Cluster Default which is set to version 4.8., code 9000: Failed to verify Power Management configuration for Host *******., fix accordingly and re-deploy."}
How I can solve this problem? I cannot find any suggestion on internet.
3 months, 2 weeks
oVirt Node 4.5.5 no virtualization tab
by arkansascontrols＠icloud.com
I have installed 4.5.5 and can get to the Web Interface at :9090 on all 3. I have been able to add the SSH keys and from any of the 3 hosts web interface I can get to the others from the drop down. But there is no Virtualization Tab on any of the 3, so no way to create VM's. I have followed a few instructions from some threads I've found on here
https://www.ovirt.org/dropped/gluster-hyperconverged/chap-Deploying_Hyper...
I subscribed all 3 hosts to the repo, and installed the engine, but the cockpit-ovirt-dashboard doesn't exist to install, and I'm guessing that's where I will find what I need to make this usable.
Any help would be appreciated.
3 months, 2 weeks
Installation issue
by dave nirav
Hi,
Probably this is my first mail to this list.
I am facing lot of dependency issue while installing ovirt-engine, moreover
on getting openstack, ceph and ansible. I have specified the repo paths in
/etc/yum.repo.d/<>, it seems openstack path show EoL and I am unable to
install its dependent packages.
I am working on limited env with customization over RHEL9 though I am not
having any RHSM support.
I am installing things 1 by 1 and would like to get help on the
installation steps and list of rpms needed to do engine-setup.
Any help will be appreciated.
dnf install ovirt-engine
Last metadata expiration check: 1:41:11 ago on Wed Sep 25 11:35:58 2024.
Error:
Problem: cannot install the best candidate for the job
- nothing provides openstack-java-resteasy-connector >= 3.2.9 needed by
ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4
- nothing provides ansible-runner-service >= 1.0.6 needed by
ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4
- nothing provides collectd-write_syslog needed by
ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4
- nothing provides xmlrpc-client needed by
ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4
- nothing provides ceph-common needed by
ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4
- nothing provides python3-cinderlib needed by
ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4
- nothing provides ansible < 2.10.0 needed by
ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to
use not only best candidate packages)
Thanks,
Nirav Dave
3 months, 3 weeks
Migrating Self Hosted Engine from el8s to Standalone Hosted Engine using el9
by Nur Imam Febrianto
Hi.
Currently we're using oVirt 4.5 that still based on el8s (Both host end the engine), because CentOS 8 Stream had been EOL'ed we want to migrate the engine using Standalone Engine (not the self hosted) and uses any el9 capable OS. What is the proper way to do it ? And after the migration what will happened to storage domain that used by the Self Hosted Engine in el8 ? Maybe anybody here can give me some good advise. 🙂
Thanks before.
Regards,
Nur Imam Febrianto
3 months, 3 weeks
API to Query OVA files from the hosts/ mounted locations
by Siddu Hadpad
We are storing images in an NFS share that will be mounted to KVM hosts. When I attempt to provision a VM using the mounted path, it successfully provisions the VM from the OVA files. However, if an incorrect path is provided, it results in an 'Operation Failed' error. The error message is not so descriptive.
To prevent this issue, I'd like to validate if the OVA file already exists in the specified path. Unfortunately, I haven't been able to find any APIs to query images directly from mounted locations on the host.
While the web UI does display an error if an incorrect path is provided, I'm wondering if there are any APIs available to validate the presence of the OVA file in the specific path.
3 months, 3 weeks
Add HE disks hosted-engine deploy ovirtsdk4-service.py errors
by airawan＠certa.id
Dear all,
currently i have lab environment which use 3 node server in rocky linux9.4 perform as hypervisor node, since EL-9 cockpit-ovirt-dashboard doesn't appears in EL-9 packages we use CLI glusterfs cluster replication and hosted engine setup.
hosted engine deploy command i've use = hosted-engine --deploy --4
task executed = [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add HE disks]
error highlight =
[ ERROR ] {'exception': 'Traceback (most recent call last):\n File "/tmp/ansible_ovirt_disk_payload_691q2jk2/ansible_ovirt_disk_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_disk.py", line 883, in main\n File "/tmp/ansible_ovirt_disk_payload_691q2jk2/ansible_ovirt_disk_payload.zip/ansible_collections/ovirt/ovirt/plugins/module_utils/ovirt.py", line 672, in create\n entity = self._service.add(\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/services.py", line 7825, in add\n return self._internal_add(disk, headers, query, wait)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 232, in _internal_add\n return future.wait() if wait else future\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 55, in wait\n return self._code(response)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 229, in callback\n self._check_fault(response)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4
/service.py", line 132, in _check_fault\n self._raise_error(response, body)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 118, in _raise_error\n raise error\novirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[]". HTTP response code is 400.\n', 'failed': True, 'msg': 'Fault reason is "Operation Failed". Fault detail is "[]". HTTP response code is 400.', 'invocation': {'module_args': {'name': 'he_virtio_disk', 'size': '51GiB', 'format': 'raw', 'sparse': True, 'description': 'Hosted-Engine disk', 'content_type': 'hosted_engine', 'interface': 'virtio', 'storage_domain': 'hosted_storage', 'wait': True, 'timeout': 600, 'auth': {'token':
any suggestions i really appreciate
thank you..
3 months, 3 weeks
